
Part Number:
(LZR)
87700-S
Product Details:
Here is an idea as to what Q Source was building: they started with LZR-87005-99 and added a U shaped aluminum energizing bar with a 0.5"W x 0.1"H strip of ceramic in the center. Then they added two LZR-8700014 rods leaving a 0.05" gap to the ceramic strip / aluminum energizing bar. All appears to be glued with some kind of ceramic epoxy. The bar is exposed through the top hole of the LZR-87005-99. The ceramics were likely used to dissipate the heat of the plasma; the energizing rails used to create a high voltage capacitor within the laser chamber.
Part #: PS PP-1659A/G
Description: This Battery Charger is in like NEW condition! Th…
Brand: Syncor Industries Corp.
Part #: CFE 005700R00AAN
Description: Electrolytic Capacitor 5,700 µF 15v DC Sprague Re…
$4.50 / Each
Part #: RC07GF151J
Description: 150 ohm 1/4w 5% Carbon Resistor Allen Bradley Car…
$0.75 / Each
Part #: RWF 1-3/4Z239
Description: 25 ohm − 10w Adjustable Resistor, 3/8" x 1−1/2" D…
$2.25 / Each
Part #: RCV RV4NAYSD501A
Description: Panel bushing mount pot. 500 ohm. Linear taper. 1…
Brand: Allen Bradley
$10.00 / Each
Part #: PS AEC-T4890B
Description: Anoma Electronic Co. AC adapter. Class 2 transfor…
Brand: Anoma Electronic Co
$8.95 / Each
Part #: SWR 9000-470-0040
Description: 3 wafer ceramic switch. 1P6T on two wafers. Third…
$29.00 / Each
Part #: CRY 000.015400
Description: HC−13 / wire leads 15.40 KHz Crystal 38.51mm H x …
$40.00 / Each