Login
Part Number:
(LZR)
87700-S
Product Details:
Here is an idea as to what Q Source was building: they started with LZR-87005-99 and added a U shaped aluminum energizing bar with a 0.5"W x 0.1"H strip of ceramic in the center. Then they added two LZR-8700014 rods leaving a 0.05" gap to the ceramic strip / aluminum energizing bar. All appears to be glued with some kind of ceramic epoxy. The bar is exposed through the top hole of the LZR-87005-99. The ceramics were likely used to dissipate the heat of the plasma; the energizing rails used to create a high voltage capacitor within the laser chamber.
Part #: PS PP-1659A/G
Description: This Battery Charger is in like NEW condition! Th…
Brand: Syncor Industries Corp.
Part #: CNA CL1169-5
Description: Cliff 1/4" switched mono jack. Bushing. Kinked PC…
Brand: Cliff
$1.75 / Each
Part #: TUA 11MAGNAL
Description: CRT tube socket. 11 pin Magnal bakelte socket ass…
$35.00 / Each
Part #: CFE 000560R00AAG
Description: Electrolytic Capacitor 560 µF 6v DC Sintered Anod…
$8.00 / Each
Part #: CRY 000.37900
Description: HC−6 379.000 KHz Crystal 19.7mm H x 19.2mm W x 8.…
$10.00 / Each
Part #: LMP VM911M-7G
Description: Dialco "Press-to-Test" indicator. Green lens, pan…
Brand: Dialco
$23.00 / Each
Part #: RWF RS2C-390
Description: 390 ohm 1% − RS2C Wire Wound Resistor With tab te…
$1.50 / Each
Part #: CFO 500P9068
Description: 10 µF @ 370 vac Sprague ECCOL, Spade QC terminals…
$16.00 / Each
