Antique Knobs

Product Details:
Red plastic chicken head knob. 1 set screw. 1/4" brass insert bore. 1-1/4"L x 3/4"w x 0.59"H.

Product Details:
General Radio 2-3/8"D variac knob with pointer. Fluted, narrow skirt. Black phenolic resin, brass insert with set screws. Accepts 1/4"D shaft but has removable bushing to allow for 3/8"D shaft. Only 2 available.

Product Details:
Black Bakelite knob. Winged with white painted pointer arrow. Brass insert. 1/4" diameter bore. Two set screws.
3/4"d x 1-1/8" head to tail x 5/8"H.

Product Details:
Kurz-Kasch antique chicken head knob. Bakelite. One set screw. 1/4" bore. 1-1/4"L x 3/4"W x 5/8"H. This knob gets its name because it resembles a chicken's head. I've also heard it called a bird beak knob. New, old stock.

Product Details:
Vintage 1-5/8" bakelite knob for HP equipment. Brass insert, dual allen head screws. 1/4" shaft. HP P/N: G-74R. Removed, but in excellent condition.

Product Details:
Vintage 1-5/8" bakelite knob for HP equipment same as left except with white arrow printed on the face. Removed, but in excellent condition.

Product Details:
Unique, antique bar knob. Heavy-duty bakelite. One large set screw opposite pointer. One set screw. 1/4" bore. 2-1/4"L body x 13/16" across @ middle x 11/16" high. Notice the "pointer arrow" at the tip of the white line. Great band switch knob, variacs (Powerstat & Superior), etc.. New, old stock.

Product Details:
National HRP bar knob. Bakelite. One set screw. 1/4" bore. 1-1/4"L x 3/4"W x 5/8"H. We've seen this knob used on a lot of ham and test equipment over the years. New, old stock.

Product Details:
Antique black bakelite knob. Arrow pointer. 1/4" bore. 1 set screw. 0.562" wide, 1.68" long. Used, some wear.

Product Details:
Eight point bakelite vintage knob. Two spline sets. 1/4" bore. 5/8" high, 1-1/8" diameter. Used, less than perfect.

Product Details:
1960's era knob. Beveled crown, knurled edge. 2 set screws. Black bakelite or plastic (unsure). Hazy finish. 1/4" bore, brass insert. 3/4"D x 1"H.

Product Details:
1960's era knob. Beveled crown, straight sides. 2 set screws. Black bakelite or plastic (unsure). Hazy finish. 1/4" bore, brass insert. 3/4"D x 1"H.

Product Details:
Plascon 1940's antique grey plastic knob for radio or test equipment. 8 perimeter flutes, 2 center circles. 1/4" bore, 2 set screws, brass insert. 1-5/8" diameter. Heavy, unique, cool!

Product Details:
Found on Collins vintage radio equipment. Bakelite, 1/4" bore, one set screw, removable skirt (screws under). 7/8" high. Knob body 1-9/16" diameter, 2" diameter at skirt. Used.

Product Details:
Antique knob almost identical to (KNB) A3. Bakelite. Non-removable skirt. 2 set screws. 1/4" bore. 1-9/16"D body, 7/8" high, 2"D skirt. Used but cleans up nicely.

Product Details:
Vintage knob. Rare pinch disc style knob. This is a very tight disc, probably for a metal dial. Bakelite. Accepts 1/4" shaft through disc center. Two set screws. 13/16" high including disc. Knob body 1-1/8" diameter. Used.

Product Details:
Vintage knob exactly as above but 1/4" shaft protrudes 1/2" beyond rear. Used. Rare pinch disc style knob. This is a very tight disc, probably for a metal dial. Bakelite. Accepts 1/4" shaft through disc center. Two set screws. 13/16" high including disc. Knob body 1-1/8" diameter. Used.

Product Details:
Vintage dial knob with skirt. Bakelite knob measures 1-1/8"D x 0.689" high. Brass insert, 1/4" bore, 2 set screws. Metal skirt measures 1-1/2" diameter, 0 - 10 graduation. NOTE: Same knob as (KNB) A1 but with skirt.

Product Details:
Vintage knob matches style of A1 and A4 but has pointer rather than pinch disc. 1/4" bore. 5/8" high.1-1/8" diameter. Two set screws. Used.

Product Details:
MIC Used/Chipped vintage knob without pointer. 1/4" bore brass insert, bore holes for two set screws, NOT included. Same knob as A5N with blemishes. Solid piece but very old. No Pointer. 1-1/4" high. Knob body 1.99" diameter, 2-1/8" diameter at skirt. Logo on bottom is a circle with MIC in middle. We found them wrapped in paper circa 1955. Light to noticeable chipping, due to age and storage.

Product Details:
Vintage pointer knob in same family as above. Bakelite, 1/4" bore, two set screws. Solid piece but very old. 13/16" high. Knob body 1-3/8" diameter, 1-1/2" diameter at skirt. Used.

Product Details:
MIC Used/Chipped vintage knob. Light to noticeable chipping. Same knob as A52PN with blemishes. 1/4" bore, brass insert, bore holes for two set screws, NOT included. Solid piece but very old. Pointer line visiable slightly yellowed. 1.23" high. Knob body 2" diameter at top, 2.13" diameter at skirt, 2.32" at pointer. Logo on bottom is a circle with MIC in middle. Bakelite.

Product Details:
General Electric elapsed time indicator faceplate for 1965 Teletype Corporation Models 32 and 33 page printers. Black bakelite. 2.8"W x 2.6"L, 0.185"H, center hole 1/2"D. This was part of the elapsed time indicator modification kit, which included the ETI switch also (not available). Could be re-purposed with other selector knobs. Be mindful of 0.185" height. Numbered 1 thru 12.

Product Details:
Ohmite pointer knob. Vintage surplus from Fistell's Electronics. Substantial 3 oz weight. 2-1/4"" diameter. Brass shaft, 1/8" bore. 2 set screws. New in the box!

Product Details:
Ohmite handwheel knob. Vintage surplus from Fistell's Electronics. 3-1/2" diameter, 2 set screws, 1-1/2" depth. New in the box.

Product Details:
Kurz-Kasch antique lever knob. 2 set screws. 1-3/4"L x 5/8"H. 1/4" bore. Beautiful bakelite!!

Product Details:
Kurz-Kasch 3" "Pointer" knob. 3"D skirt. 2-3/8"D fluted knob. 15/16"H. 3/8" bore, 2 set screws. Circa 1950. New, old stock. Mint condition!!

Product Details:
Vintage Chicago Daka-Ware chicken head knob. Extended beak. Used on some variacs. 2"L x 3/4"D x 5/8"H. 3/8" shaft. A rare find!!

Product Details:
Clear chicken head knob. Brass insert. 1 set screw. 1-1/4"L x 3/4"D x 0.59"H. 1/4" bore.

Product Details:
Vintage very old chicken head knob. Different from (KNB) CHICKEN but Similar to Kurz-Kasch. 0.76"D x 1.25"L x 0.53"H.

Product Details:
Giant rooster head knob. Bakelite. Big brother to chicken head knob. 2 set screws. 1.5" x 0.88"D x 0.88"H. 1/4" bore.

Product Details:
Vintage bar knob. Bakelite body. Metal pointer with sharp point. 1.25"L x 0.89"D x 0.79"H. 1/4" bore. 1 set screw.

Product Details:
Vintage Dakaware bakelite knob. 2.36"D x 0.82"H. 1/4" bore. 2 set screws. New!

Product Details:
General Radio knob. Glossy black. Rare, vintage. 1"D body, 1.32"D skirt. 1/4" bore. 2 set screws.

Product Details:
Classic Kurz-Kasch bakelite knob for vintage fender instruments such as Fender Jaguar guitar and Mustang bass. Hairline and pointer dot. One set screw. 1/4" bore. 1-1/4"D skirt.

Product Details:
Giant vintage bar knob. Pointer line with arrowhead. 2-3/8"L x 1-1/4"D x 15/16"H. 3/8" bore. 2 set screws.

Product Details:
National Radio Products vintage selector dial. Bakelite. Counts 1 - 100, left or right turning. 4-7/8"H x 4"W, 1/2" shaft. Knob mechanism "Patented June 20, 1922". Made in the USA. Brand new in the box. Only one available.

Product Details:
Vintage 8 point heavy solid knob. Exactly like (KNB) A17D from the curb. 1/4" bore, brass insert. 2 set screws. 2.36"D x 0.87"H. New!

Product Details:
Antique skirted bar knob. 1/4" brass bore. 2 set screws. Pointer / arrow on skirt. 1.37"L knob x 0.78"H. 0.87" knob center diameter. 1.50" skirt diameter. Heavy duty black bakelite aluminum skirt. NOS. New.

Product Details:
Vintage Dakaware chicken head knob. Red. 1/4" brass bore. 1 set screw (present). 1.20"L x 0.73"W x 0.61"H. NOS. Made in Chicago, USA.

Product Details:
Chicken head knob. Black. Bakelite. 1 set screw (present). 1/4" bore (no insert). 1.25"L x 0.63"H x 0.75"W. NOS. HD Co. #2300.

Product Details:
8 point heavy duty domed knob. Bakelite. 1/4" brass bore. 2.37" O.D., 1.25"D post, 1.312"H. 1 set screw (not present). Weighs 2 oz. Pulled, used. Surface scratches due to age but can be buffed out.

Product Details:
Vintage Rogan Bros USA bar pointer. Bakelite, 2 set screws. Minor cosmetic imperfections due to age. 1.5" L x 0.75" Widest x 0.75" HT max. Full bore, 1/4". Milspec /Rogan Bros USA. NOS.