Rack Cabinets & Panels

Product Details:

Indoor / Outdoor Air Conditioned Rack Cabinet - Manufactured in 2000 by Prologic Controls.

• External Dimensions: 84" wide including Air Conditioner & Electrical Panel, 31-1/2 deep x 78 high + 6 for HD Pallet (84 Total) + 3 for lift eyes
• Internal Equipment Space: 2 swinging 19 racks, 56 high up to 24 available depth
• Air Conditioned with 6000 BTU McLean 110v unit
• Heavy steel construction - white powder coated in / out
• Both equipment racks pivot / swing out 90°
• Weather-proof cabinet is insulated and provides remote server space in dusty warehouses or outdoors. NEMA 4 outdoor weather proof rating
• 20 various breakers on DC side for chargers and battery banks
• Large AC Service cabinet with breaker panel including two 15 amp, four 20 amp and one 100 amp main breaker. Possible uses include: Remote cellular cabinet, server cabinet, additional computer space
• 1,500 pounds. Shipped bolted to H.D. pallet
• Large full width battery compartment

Product Details:
The perfect rack cabinet. Brand new factory wrapped and palletized! They are going fast so don't pass up your chance to solve your data rack cabinet needs with the best value around! Compare these old school cabinets to the modern SC84X30 cabinet version; but at more than half off the price. Over 1,000 already sold! Hurry limited quantities remaining!
PLEASE NOTE: Although these are new and unused cabinets, they may have minor dents and scratches from 20+ years of storage.

Call or e-mail for exact shipping quotes. 61 Cabinets = 1 Truck Load.

• Standard 19" rack width
• Louvered, ventilated, locking front & rear doors. Includes 1 key
• Removable side panels for easy access
• Fully adjustable #10-32 tapped rails opening can be adjusted from 6" to 28"
• Outside Dimensions: 82.062" tall, 22.06" wide, 30" deep
• 77" vertical panel space (44 rack spaces)
• Seismic Zone 4 rated
• Four point leveling
• Acid resistant battery tray (not shown). Discard battery tray to move vertical rails to front or rear of cabinet.
• 345 pounds shipping weight
• Normal price in today's market: $2000-$2500 each

Product Details:

Set of 4 heavy duty swivel casters with mounting hardware. Bolts up to existing brackets on cabinet bottom. Performa rubber.

• Load Capacity: 140 lbs
• Wheel Width: 1.25 in.
• Wheel Bearing: Delrin
• Non-marking: Yes
• Swivel Radius: 2.4063 in.
• Rig Material: Steel
• Kingpin Type: Steel Rivet
• Mounting Type: Top Plate
• Bolt Hole Pattern: 1.75 in x 3 in
• Wheel: 2.00002.441
• Axle Diameter: 0.375 in
• Wheel Diameter: 2.5 in
• Wheel Face: Flat
• Wheel Durometer: 65 (±5), Shore A Scale
• Wheel Color: Grey / Grey
• Overall Height: 3.875 in
• Rig Finish: Zinc Plating
• Rig Construction: King Pin
• Raceway: Double Ball
• Top Plate Dimensions: 2.5 in x 3.625 in
• Bolt Hole Size: 0.375 in

Product Details:
Cabinet carcass from WWII CG35 modulator - rotary spark gap generator. Parts have been removed. Heave steel cabinet with 3 solid sides & front-hinged double door. Top drop-down panel. 24" x 28" x 54" high. Very heavy. New!!

Product Details:

Dehler gray steel 19" rack cabinet. Front and rear louvered doors with adjustable louver covers inside. Rails are screwed to drilled and tapped frame members that allow positioning the rails in one inch increments, anywhere from front to back of the cabinet. One set of rails at front and a second set 12" back. Includes electrical panel with two resettable 15 amp circuit breakers, a hardwired trouble light and a 12 outlet plug strip mounted to the side. New Military surplus. Some slight surface rust spots.

• Dimensions: 22-5/8" x 24"D x 87-1/2"H
• Inside Height: 81" high
• NSN: 5975-00-315-2329

Product Details:

Harris 30"H, 19" half rack cabinet. Formica top counter. Includes 4 blank panels as shown. Used, but in excellent condition.

• Dimensions: 37"H x 26"D x 23"W
• Inside Height: 21-1/2" internal equipment depth, accomodates 30" total panel height

Product Details:

Sanmina-Sci 19" server rack. 52-1/2" equipped height. New, unused cabinets!! However, some were damaged in transit. Therefore, we offer a scratch and dent sale.

• Adjustable rails - 32" max front to back
• 4 swivel casters
• RoHS
• Ventilated at top and adjustable floor plate
• Lockable front and rear doors
• Gasketed doors
• Dimensions: 24" x 38-1/2" x 58-1/2"H overall
• 34" maximum inside depth
• Weight: 260 lbs

Product Details:

Western Union RF sealed steel cabinet has recessed pre-drilled rails for 19" equipment, 4" x 10" in and out ventilation honeycombs, door seal and full height latch. Solid back not removable. New, unused. NOTE: Motor freight only, 200 lbs crated weight.

• Inside mounting dimensions: 26-1/4"H x 19"W x 18-3/4"D
• Outside dimensions: 33"H x 25"W x 21"D

Product Details:
Same as (ENC) E1646-2 but includes WU power supply. New.

Product Details:
Same as (ENC) E1646-2 but used, removed from service. May have electrical holes drilled. No power supply.

Product Details:

New factory cabinets have never had equipment mounted. Two tone brown paint, front and rear doors with magnet hold as well as lock. Vents on top and rear. All cabinets have some minor damage like doors out of alignment, scratches, etc. Motor freight averages from $75 - $150 per cabinet anywhere in the continental US.

• Inside mounting dimensions: 64"H x 19"W x 15"D (variable depth with rail adjustment)
• Outside dimensions: 70"H x 21-3/4"W x 19-1/4"D

Product Details:

New 70" factory cabinets have never had equipment mounted. Front and rear rails for 19" equipment. Gray paint, open front and rear but posts for door.

• Inside mounting dimensions: 24-3/4"H x 19-1/2"D
• Outside dimensions: 70"H x 23-3/4"W x 21-1/2"D

Product Details:
Brand new, never used (still in the factory wrapper) rack cabinet originally made for the Scientific Radio SR-110 one kilowatt Transmitter / Amplifier. 19" rack width, 43-3/4" panel height, 20-1/2" inside depth. Front and rear mounting rails. Outside dimensions: 20-1/2"W x 48"H x 22-3/8"D.

Product Details:
Brand new, never used rack cabinet originally made for the Scientific Radio SR-150 ten kilowatt Transmitter / Amplifier. 30" rack width, 68-3/4" panel height, 31-1/4" internal depth. Front & rear mounting rails. Outside dimensions: 31-1/2"W x 71"H x 33"D. Opening on left side is 16" x 24"H.

Product Details:
"Gates-Criterion Compact" 19" rack panel adapter. 7" high. Opening = 8-9/16"W x 5-1/8"H. Gates P/N: 916-5272-001.

Product Details:
Conrac 19" rack shelf. Black textured finish. Offset flanges on front permit mounting of shelf in rack and separate securement of equipment on shelf. 8-1/4" high x 15" deep.

Product Details:
Harris "Criterion Compact" 19" rack adapter. Accepts 17-1/4" x 5-1/4" equipment. Harris P/N: 994-6812-003.

Product Details:
21-1/2" wide rack chassis with ball bearing slides. Used, removed from Harris broadcast equipment. Includes telephone and tone pad on front panel. 21-1/2"W x 8-3/4"H x 24-1/2"D.

Product Details:
Rack shelf with flip front panel made for Gates / Harris broadcast equipment. Very cool chassis with 2 minor problems: They are new but were stored for 30 years in an unheated warehouse. The galvanized steel has corroded in places and the front panel gray paint is chipping. Both surfaces could be repainted easily. Measures 3-1/2" x 19".

Product Details:
Very high end rack cabinet has rails on front and rear, retractable handles, black textured finish, removable top lid panel, fold down front bail and thick rubber pad feet. Rail holes not tapped but use clips. We have only 2 in stock. New, unused. Dimensions: 7"H x 19"W x 21-5/8"D.

Product Details:
Pair of 14" high rack ears. Dark olive green, nearly black.

Product Details:
10-1/2" x 19", 1/8" thick. Blank gray hammertone steel panel. Steel. Weight: 6.55 lbs.

Product Details:
Black, heavy rack panel. Aluminum. 3/16" thick. 18-3/4" x 5-1/4".

Product Details:
1-3/4" x 19"W. Blank gray panels. Aluminum.

Product Details:
7" x 19"W. Blank gray hammertone aluminum panels. Aluminum. Weight: 1.60 lbs.

Product Details:
Rack cover panel. Gates gray. 19"W x 22-1/2"H. Ventilated side panel or 19" filler. 3/64" thick steel. Harris P/N: 994-6892-001. New, unused.

Product Details:
Rack cover panel. Gates gray. 19" x 19", ventilated. 3/64" thick steel. Harris P/N: 994-6665-001. New.

Product Details:
Vero Electronics ventillated steel case. Dark gray, wrinkle finish. 3U opening - 5-1/4" x 19". Measures 19.5" x 12.5" x 6.75" tall. Plastic feet and 2-1/2"H kick stand. Brand new in the box!!

Product Details:
Newton floor insulator plate. 23" rack insulator kit. Electrically insulates rack base from floor. Measures 16" x 24". New, unused.

Product Details:
Cooper B-Line 19" relay rack isolation kit. Insulate base of relay rack from contacting concrete. Alt. P/N: 10196-000.

Product Details:
Newton ground bar with insulators. Solid copper. 23" long. Alt. P/N: 10621-023.

Product Details:
Kepco 19" rack shelf. 17-3/4" internal tray depth. 5-1/4"H.

Product Details:
Kepco 19" rack shelf. 19-3/4" internal tray depth. 5-1/4"H.

Product Details:
Bud Classic II Cabinet. Royal blue textured. Aluminum and steel construction. We have 5 cabinets in stock, all new in the box. Outer boxes have water damage but cabinets were sealed in plastic and are pristine.

• Dimensions: 21" x 22" x 25"H
• Rack panel space: 22-13/16" x 19"w
• Weight: 41 pounds

Product Details:
4 post open server rack. 19"W rack, 76" rack height. Square holes can be converted to threads with cage nuts. Overall dimensions: 23-1/2" x 23-1/2" x 79-1/2"H. 200 lbs shipping weight. New!! Made by Schroff for Motorola.

Product Details:
HP attenuator/switch rack mount support kit. Aluminum panel with screws to mount programmable and RF switches. 17.5" long, 7" across, 0.076" thick. Comes with instructions / data sheet. New.

Product Details:
Two-tone blue cabinet. 19" rack. 8-3/4"H x 12-1/2" deep. U.S. made. New-shelf worn, never used.

Product Details:
Newton ground bar with insulators. Solid copper. 23" long. Alt. P/N: 10621-023.

Product Details:
Black, heavy rack panel. Aluminum. 3/16" thick. 18-3/4" x 5-1/4".