Metal Builders Project Boxes

Product Details:

Need a solid steel anodized, RF-tight project box? This is the one!! It has just 4 holes in the front panel for included LEDs and 2 holes in the back panel for an "F" connector and a 5 pin "DIN" connector. When manufactured, they even left bare metal around the holes for the cover mounting screws to insure good metal to metal contact. The plastic front panel mounts to the steel front panel and is removable with the 3 green LED positions marked for Power, Cable, Link and a red LED marked Message.

The steel box is 18-1/2" wide x 10" deep x 3-1/2" high and includes an internal divider spot welded in place creating a 4" wide compartment for the included power supply. The power transformer puts out 8.5 vac @ 0.5 amps and 22 vac @ 0.5 amps. Mounted on the back panel are a 5 volt, 1.5 amp regulator and a 1.5 amp, 18 volt regulator on a small heatsink.

Filter capacitors are 22,000mF at 16 volts and 470mF at 50 volts. The end result is a linear DC +5 volts @ 1.0 amps and +18 volts @ 1.0 amps supply that can supply power for many different projects. A 1/2 amp slo-blow fuse and holder are included as well as the SJT 18/3 power cord.

Each cabinet also includes a 'Logic Board' and an 'RF Module'. See the description below of what this was for. There is a 40" long cable with 5 pin male "DIN" connnectors on each end. Also included is a 40" RG-59 cable with male "F" connectors on each end. A great project box with some usable parts for a bargain price. Shipping weight = 16 lbs.

Own a Piece of History

The NABU Network was the City of Ottawa Canada's step into the future well before its time. Please read the historical perspective on this very early bi-directional home/business access network.We were able to acquire the set-top converter / controllers for this network. This equipment provided the interface between the 117 MHz cable signals that were exchanged between the DEC server and the user's TV. There was probably a keyboard type device used with this for selecting services and interaction.

In addition to the power supply described above there are 2 modules inside the unit. There is an RF module that down-converted signals from the cable connection and up-converted requests to be sent to the server. This also provided the TV signal to the user's set. All sections of this unit are enclosed in another RF-tight box. There are 4 circuit boards for frequency synthesis, data in and out and RF conversion and dual helical coil bandpass filters. All parts on these boards are descrete components and include some LS and CMOS chips. This module is mounted on a 4 3/8" x 8 1/2" one-quarter inch thick heatsink.

The logic module includes 4 socketed chips: a TR1865CL-04, a full duplex UART, a SC87253P 8 bit microprocessor, a N8X60N FIFO I/O controller and a pre-programmed ROM. The remainder of the parts on this board are numerous 74LS series logic ICs.

While there are a lot of components included on these boards they are literally antique and more of a curiousity than anything else. Keep in mind that at the time these boxes were made, there was no internet. Only BBSs and teletext services. By the way, if you are familiar with the service these boxes were used for, let us know so we can share the information with others.

Product Details:
Scientific Radio SR-645 antenna coupler rain tight case. Great for outdoor antenna tuner or switch. Hinged lid with gasket. Four threaded inserts heli-arced to back for interior mounting. Four slotted tabs on outside for mounting to a surface. Four pre-drilled holes on ends for connectors. Solid aluminum for light weight. Seven stainless steel clips secure the lid. Provision for padlock on lid. Holes: Bottom end: 1-1/4", Two holes 9/16", 3/16", Top: 2". Measures 20" x 24" x 9-1/2".

Product Details:
Scientific Radio SR-645 antenna coupler rain tight case. Great for outdoor antenna tuner or switch. Hinged lid with gasket. Four threaded inserts heli-arced to back for interior mounting. Four slotted tabs on outside for mounting to a surface. Four pre-drilled holes on ends for connectors. Solid aluminum for light weight. Seven stainless steel clips secure the lid. Provision for padlock on lid. Holes: Bottom end: 1-1/4", Two holes 9/16", 3/16", Top: 2". Measures: 20" x 24" x 11-1/2".

Product Details:
Scientific Radio SR-645 antenna coupler rain tight case. Great for outdoor antenna tuner or switch. Hinged lid with gasket. Four threaded inserts heli-arced to back for interior mounting. Four slotted tabs on outside for mounting to a surface. Four pre-drilled holes on ends for connectors. Solid aluminum for light weight. Seven stainless steel clips secure the lid. Provision for padlock on lid. Holes: Bottom end: 1-1/4", Two holes 9/16", 3/16", Top: 2". Measures: 20" x 24" x 13-1/2".

Product Details:
Heavy duty aluminum chassis. New, unused. OEM surplus. Shelf hopping scars. 42-1/4"L x 23-1/2"H x 18-1/2"W.
NOTE: UPS oversize surcharge in addition in dimensional charges will apply.

Product Details:
T mounting bracket. Military, welded steel. Two 2-3/4" holes with 5 perimeter holes. Two 1-1/2" pipe / conduit holes on end. Made to mount up to I or H beam with 4 - 5" flange. Measures 4" x 6" x 12". Weighs 19 lbs. 5975-00-645-8653. New surplus.

Product Details:
Previously used steel case. Has gasket around inside perimeter of door for seal and two side bolts to lock door. Mounting back plain in rear for equipment and has pre-drilled holes on side - 2"DIA x 3-1/4"H keyhole, two shaft holes 1/4"DIA each labeled "type" and "coarse", two fine holes 1"DIA and 1/2"DIA. Top has 2-1/2" hole with insulator disc installed, and an F connector feedthru. Case has 4 flanges 2"W x 1-1/2"H on each corner for fall mounting. 20"W x 9-1/2"D x 24"H. Only one available.

Product Details:
MiTronix SAT-PAD enclosure. If you ever need a SATPAD, or an industrial snare drum, we've got one right here. 24"DIA x 7-1/4"H with a 10"DIA access hole on the top with 3 thumb screw cover. 6 quarter inch bolts around the perimeter hold the top and bottom plates together. 4 cables/conduit clamp on top.

Product Details:
Chassis with front panel. Brand new equipment we stripped of parts and cannot bear to scrap. This is a beautiful chassis with black wrinkle front panel. 26-7/8" x 10-3/4" x 3/16" thick aluminum. Overall dimensions: 20" x 21" x 10"H.

Product Details:

Compass Technical made a stereo amplifier / tuner back in the 60's and this is the cabinet. I have a hundred or so new, still in the wrapper. The real, authentic WALNUT veneer over wood is beautiful. This cabinet contains NO METAL.

• Outside: 15-3/8" x 10" x 5-3/4"H
• Inside: 14-5/16" x 9-1/8" x 4-1/4"H

Product Details:
Rack mount chassis with hinged door on front for access to 8 slot PC card rack. Includes 12 vdc, 1 amp power supply. Input is 115 / 230 vac or 12 vdc. Front panel includes power switch, 3 momentary pushbutton switches (SPST), 3 LEDs and 4 plus / digital 7 segment displays. Dual hex thumbwheel switches. The displays accept BCD data. Dimensions: 5-1/4" x 19" x 14".

Product Details:
Builder's chassis. Aluminum chromate. 0.095" thick. Various knockouts for RF & data connectors. Various inserts. 4-1/2" x 16-7/8" x 3" high. Only 5 available.

Product Details:

Rack mount enclosure. RF tight frame behind panel for equipment. Includes front panel controls and knobs. Perfect for receiver, transmitter or control circuits for a remote stie. Includes AC power connector on rear, four 3 amp diodes and 2300 µF, 35v filter capacitor. Just add a transformer for a power supply to power the units. Top and bottom removable.

• 5-1/4" x 19" x 8"
• Two internal spaces: 9" x 4-3/4" x 2-3/4"and 6" x 6" x 4"

Product Details:
Scientific Radio Systems remote transceiver control unit. Includes front panel controls: 4 rotary switches; 1 1P10T, 1 2P6T, 1 2P5T & 1 2P4T with SPST AC switch. Three lighted pushbutton switches; 1 pair momentary DPDT, 1 pair independant maintained DPDT & 1 pair alternating, maintained DPDT. Internal boards included CW sidetone, VOX, squelch, power supply & 4 watt audio amplifier that drives the front panel speaker. Squelch control senses voice (or lack of) on incoming audio signal. All audio in and out are 600 ohm balanced through included transformers. VU meter on front panel for setting in / out audio levels. Some additional control and FSK / loop boards not included. Operates on 115 vac but does not include power transformer. Install your own 12 vac transformer to make the unit work. Partial manual included. SR-1650R Remote Unit size: 6-3/16"H x 11-13/16"W x 15"D.

Product Details:
Harris chassis. "Solid Statesman FM Limiter". 19" rack, 3-1/2" high, 13-3/8" deep. No lid. New!!

Product Details:
Hoffman enclosure for use with the Badger OmniRemote. Brand new cabinet with original electronic equipment removed. The floating sub deck remains allowing fastening of any new system and is removable with 4 quarter turn screws. White powder coated HEAVY DUTY steel. NEMA type 3R. Rainproof. 44 lbs. Dimensions: 22"H x 20-1/4"W x 8-3/4", lockable.

Product Details:
Suckle Electronics U.S. Army Signal Corp. metal case with latch. Olive drab. Molded and felt padded interior. Great carry case for... vibrators or telescope eye pieces / accessories or any parts that need T.L.C. when being toted. New, unused. Measures: 3-1/4"H x 10-3/8"W x 5-1/16"D.

Product Details:

Wilman Co. power splitter / combiner. 3 (three) "SMA" female connectors. Aluminum case with removable lid. Installed stripline circuit board easily removed with 3 screws. Inside milled out to 1-1/4" x 1-3/8" x 5/16". Outer dimensions: 2" x 2" x 3/4". All remaining units are stamped PD1.

We believe this power splitter / combiner is made for 800 - 900 MHz range. 500 pcs available.

Product Details:
Film can. 2 part. Tin / steel. Includes empty film reel. Excellent condition. 3-5/8"D flange, 2-3/4"H, 7/8"D center. 3.75" inside diameter, 2.937" internal height.

Product Details:
Film can same as (ENC) FILM/R except film reel NOT included. Used.

Product Details:
Jack box, J-939B/U. Solid aluminum formed box with lid. Four 1/4" jacks. Two switched (JJ-085). One normally closed switch and a normally closed tip connection. Two without switches (JJ-086). Knock outs on 3 sides for wiring. A great project box for shielded circuits. Lid measures: 7-1/2"L x 4-1/8"W x 3/8"H. Box measures: 7-3/8"L x 3-7/8". 1-1/2" overall height. NSN: 5935-736-2478.

Product Details:
Heatsink / chassis. Chromed solid copper. Four threaded studs, 3.17" x 1.74" c-c. Five press-fit nuts. Weighs 1.62 lbs. Dimensions: 7-5/8" x 3-5/8" x 1-7/8".

Product Details:
9 penetration connectors with 3/8" O.D. seals. 2 pressure switches rated at 1,000 psig on side. 1-1/2" FIP threaded opening on bottom. 2 terminal strips inside. 8" x 10". Only 1 left.

Product Details:
23" wide x 24" high x 18" high external dimensions. Steel. 82 pounds worth. Light green. Handles on lid. New in the carton.

Product Details:
RCA electron tube shield. Built-in grounding gasket. External dimensions: 3.5" x 4.55" x 2.07" high. Internal dimensions: 3-1/8" x 4-1/4" x 2" deep. NSN: 5960-00-060-9988.

Product Details:
1-11/16" deep, 4-1/8" wide, 2-11/16" high. Box includes card guides and includes flange mount, 5-1/4" x 2-1/2".

Product Details:
4 terminal junction / connection box. 150v, 15 amps. Brass, submersible to 15 feet. One type 13TB4 terminal board in 4" enclosure. Mil-Spec T-24558/18. NSN: 5940-00-231-0831. New, old stock.

Product Details:
New enclosure with hinged lid. 16 gauge steel. Nice wall mount cabinet is perfect for alarm board, CCTV equipment relays, or any remote mounted device. 10-3/4" x 10-7/8" x 4-3/8"H. Internal divider measures 4-3/4" up from bottom. Cabinets are new but internally mounted equipment was removed. Various knockouts.

Product Details:
Bud Radio Inc. slope line enclosure. Black rinkletex. 4-1/4"H x 5"W x 5"D

Product Details:
Bud Radio Inc. enclosure. Dark royal blue texture body. Light blue texture panel. 8"H x 16"W x 9"D. Brand new in the box!

Product Details:
Bud Radio Inc. enclosure. Tilt-a-View. Charcoal gray sand finish. 4-1/2"H x 15"W x 10"D. Brand new in the box!

Product Details:
Pomona Electronics enclosure / box #3601. Blue. Aluminum box with cover. 3"L x 2.63"W x 1.65"H.

Product Details:
Bud Radio Inc. shadow cabinet. Gray hammertone. 6"H x 15-1/2"W x 9"D. Mfg. P/N: SB-2143.

Product Details:
Vintage 1960's record player case with handle. 15" x 18" x 8-1/8"H. 4 metal bumpers for carry mode, 4 rubber feet for play mode. Plywood box with plasticized paper covering. Hinged lid measures 13-3/8" x 3"H. Two-tone gray with ivory colored piping. Latch front lid. Fabric vent covering: 5.75"L x 1-3/8"H. Excellent condition! New, old stock. Minor shelf wear. Unknown brand. NOTE: Record player NOT included.

Product Details:
1950's - 1960's vintage speaker / radio vinyl covered wood case with stiched handle. 10-1/2"H x 14"W x 5-7/8"D. New, unused but a few scars from sitting on the shelf.

Product Details:
Vicon outdoor enclosure for video camera. 1/4" thick clear plexiglass window. Both sides have lockable doors. 18" x 8.5" x 8.5". Mounting bracket 6" Wide x 7.75" High.

Product Details:
Schroff "Card Pak". 2-tone textured paint. 16-4/8" x 5-1/4" front panel space. 7" x 17-1/2" x 13-3/4" overall dimensions. Tapped mounting rails top and bottom. Made in Germany, 1990 date code. Brand new! Great project cabinet.

Product Details:
Sealectro 2 way splitter. Body only. No internal circuitry. Coaxial crimp input. Output: 2 unidentified male connectors.

Product Details:
Pactec hobby enclosure. 2 kits - sow together. 1-black, 1-gray. 8-1/2"W x 9" deep x 2 - 3-1/4H. 6 position handle. New-unused. N.O.S. from 1970's.

Product Details:
Pactec hobby enclosure. 2 kits sold together. Great for building your own test equipment. New-unused. N.O.S. from 1970's. 8-1/4"W x 9-1/4" deep x 5"H.

Product Details:
Skeleton of Vintage Vacuum Tube Power Supply Chassis.

2-HKC Indicating fuse holders.