Antenna Fastening & Accessories (Guy Cables)

Product Details:
15 foot 3/16" fiber rope with clip. 800# breaking strength.

Product Details:
Heavy steel plate. Olive drab. 5-1/2" x 8-1/2" x 0.17" thick. 6 mounting holes on 3-3/4" x 4-3/4" matrix.

Product Details:
Steel standoff bracket. Face holes match steel plate SC-B-189026. 5-1/2" x 8-1/2" x 2-3/4"H. Mounting holes on 3-3/4" c-c.

Product Details:
Antenna bracket. Mates with SC-B-189026 and SC-C-189025. 5" x 8-1/2" x 5". Includes hardware.

Product Details:
Push up 30 foot mast. No guy rings. Local pick-up only.

Product Details:
Strain insulator. 27.5"L OA x 3" diameter OA. Brown glazed ceramic grade L422. 20"L x 1-7/8"D. 3-3/4"L bronze end caps. 5/8" x 1-1/2" wire rope opening.

Product Details:
TA Co cable clamp. 5/16" forged. Galvanized wire rope clamp.

Product Details:
1/4" aircraft cable clamp.

Product Details:
Where were these J bolts when you needed them last time? In our warehouse! We've been whittlingoff the pile for years. Just sink one in soft cement. 8.25¢ long total length, 2¢ return on J hook. Galvanized.

Product Details:
Aluminum bracket fits large mobile insulator base. Green, naturally. 3" diameter center hole, 3-1/2" center to center on mounting holes.

Product Details:
3/4" x 15-1/2" hanger straps made from stainless steel are tough and last forever in the outdoors. Accomodates 1/2" -3" diameter cable bundle/tower legs, etc.

Product Details:
Brown strain insulator for towers. High strength strain insulator rated at 20,000 pounds, 40kv. 5-1/4" long x 3-1/4" diameter with 1" I.D. holes.

Product Details:
Talley Industries glazed ceramic high strength strain insulator rated at 20,000 pounds, 40kv. 5-3/4" long x 3-3/8" diameter with 1" I.D. holes. Mil-Spec.

Product Details:

This is the most incredible copperweld antenna wire we've ever seen. Originally used on an aircraft as a trailing antenna, it came on a spool with over 28,000 feet, weighing in at over a ton. It is strong and flexible enough to reel out of the plane at 600 mph and not break, even with 1000's of pounds of its own weight tugging. The cable has three groups of seven strands woven together then twisted into one cable .162" in diameter. This weave makes the cable much more flexible and easy to handle than a 6 AWG solid copperweld would be. Extremely heavy copper plating allowed for wear and tear as an antenna and gives you a lifetime of duralility in the elements.

150 feet pre-cut trailing wire copperweld.

Product Details:

This is the most incredible copperweld antenna wire we've ever seen. Originally used on an aircraft as a trailing antenna, it came on a spool with over 28,000 feet, weighing in at over a ton. It is strong and flexible enough to reel out of the plane at 600 mph and not break, even with 1000's of pounds of its own weight tugging. The cable has three groups of seven strands woven together then twisted into one cable .162" in diameter. This weave makes the cable much more flexible and easy to handle than a 6 AWG solid copperweld would be. Extremely heavy copper plating allowed for wear and tear as an antenna and gives you a lifetime of duralility in the elements.

300 feet pre-cut trailing wire copperweld

Product Details:

This is the most incredible copperweld antenna wire we've ever seen. Originally used on an aircraft as a trailing antenna, it came on a spool with over 28,000 feet, weighing in at over a ton. It is strong and flexible enough to reel out of the plane at 600 mph and not break, even with 1000's of pounds of its own weight tugging. The cable has three groups of seven strands woven together then twisted into one cable .162" in diameter. This weave makes the cable much more flexible and easy to handle than a 6 AWG solid copperweld would be. Extremely heavy copper plating allowed for wear and tear as an antenna and gives you a lifetime of duralility in the elements.

500 feet pre-cut trailing wire copperweld.

Product Details:
Seven strands of 12 AWG copper plated steel, 3/8" diameter. Strong enough to guy the bigger towers, this Copperweld cable can be used for an antenna, guywire or both. Insulate at top and bottom of tower to isolate cable, the feed it at one end. Make slopers, dipoles, etc. 500' rolls only. Made by Copperweld Southern, Inc.

Product Details:
95% copper, 5% alloy, this non-ferrous cable was originally designed for use in explosive environments, (i.e. mines). Very suitable for conductive antennas, guy wires, radials, etc. Super flexible. 1/8" diameter, 525 lbs. tensile strength.

Product Details:
95% copper, 5% alloy, this non-ferrous cable was originally designed for use in explosive environments, (i.e. mines). Very suitable for conductive antennas, guy wires, radials, etc. Super flexible. 3/16" diameter, 1,470 lbs. tensile strength.

Product Details:
95% copper, 5% alloy, this non-ferrous cable was originally designed for use in explosive environments, (i.e. mines). Very suitable for conductive antennas, guy wires, radials, etc. Super flexible. 1/8" diameter, 525 lbs. tensile strength.

Product Details:
WC quality made stainless steel thimble for 3/8" cable.

Product Details:
Galvanized thimble. Fits 3/8" cable / rope. 2-3/4" long. NSN: 4030-00-498-8071.

Product Details:
5/8" bronze ground rod clamp. Direct burial. Only 34 in stock.

Product Details:
Solid copper clamps up to 4-1/0 wires.

Product Details:
Handles 5/16" to 1/2" guy cable. Extra heavy duty. Zinc.

Product Details:
Big fat galvanized clamp jaw opens to 1/2". 3-1/2" long. 1-5/8" wide.

Product Details:
Burndy splice post (includes nut). Ideal for 1/4" aircraft cable but jaw opens to 5/8". Clamps on one or both sides. Zinc plated.

Product Details:
Same as (TSL) GB4C but shorter bolt allows 1/4" gap.

Product Details:
Packaged for Motorola, this Polyphaser mounting kit is just that. Polyphaser not included.

Product Details:
High tensile strength end insulator. 7 lbs. 2"D insulator. 15-3/4" c-c eyelets. NOTE: Crate marked 3G1300-272. Part marked 71003-1.

Product Details:
Tower strain insulator. Ceramic. 10,000 # tensile strength. Brown. 4"H x 2-1/2"D. 1/2"D holes.

Product Details:
High quality cable tie clamp. U-bolt for 1/8" cable. Zinc / galvanized.

Product Details:
Military Surplus recording light mast. 4 - 60" sections + base. 20 feet tall. New in canvas bag. (One extra set for parts - broken section).