Miscellaneous Test Equipment

Product Details:
HP330D is a classic piece of audio test equipment used to measure harmonic distortion and noise in audio frequency signals.Tested and works FINE.

Product Details:
Systron Donner 6152A counter / timer. Large 7 digit Nixie tube readout. Frequency range from 0 to 50MHz (DC), 10Hz to 50MHz (AC), 10 to 512MHz on prescaler input. Resolution of 0.1Hz to 1MHz in decade steps. Four inputs. Sensitivity of "A" input 100 mV rms to 200MHz, "D" input 10 mV rms. Period measurements from 1 to 105 periods. Time Interval measurements from 0.1 µs to 108 second. Ratio measurements: fA/fB with multiplier from 1 to 105. Display storage, 500 µs to 5 sec sampling times plus hold, and marker outputs. 15-1/8" x 3-1/2" x 16-3/4". NSN: 6625-00-148-8021. Works fine.

Product Details:

Fluke 332A voltage standard. Three ranges: 0 - 10v, 0 - 100v, 0 - 1000v in 100 µV steps. Current and voltage limiting.

• Input: 115 / 230 vac
• Maximum Output: 1,111.1110 volts
• Dimensions: 7" x 19" x 18" rack mount

Product Details:

Fluke 845AB high impedance voltmeter / null detector. Measures DC voltages from 1 microvolt to 1,000 volts in 19 ranges. When used as a null detector at or below 100 millvolts, input impedance is 10 megohms. Operates on 115 vac or internal batteries. Battery may be of limited capacity.

• Dimensions: 8" x 8-1/2" x 9"
• Weight: 10-1/4 lbs

Product Details:

Hewlett Packard HP8502A transmission / reflection test set. Includes three 8120-2292 cables. 500 KHz - 1.3 GHz, 50 ohm precision power splitter. 0 to 70 dB step attenuator and directional bridge. For use with HP8754A network analyzer. NOTE: Sold only with HP8754A (above).

• Dimensions: 7-1/2" x 2-7/16" x 8"
• Weight: 4 lbs

Product Details:
Chrony model F1. Feet per second chronograph. Older style. We cannot test this item. Sold as-is.

Product Details:
Tektronix TM506 6 slot mainframe for TM500 series modular instruments with option 2.

Product Details:
EG&G Gamma Scientific Model 550-1 radiometer / photometer. Includes 550-21 sensor. Measures: Ft Candle-Sec, Milliphot, MJ/CM2, Ft Candle, Candela, etc. Sold as-is. Does not appear to be 100% operational.

Product Details:
Spectra illumination meter. Includes wand probe. NOTE: Batteries are frozen in holder. Can not test. Sold as-is.

Product Details:
Hewlett Packard 141T display frame with no plug-ins. Accepts 8550 Series IF and RF section spectrum analyzer plug-ins and Model 1400 Series plug-ins. Lights up. 16-3/4" x 8-3/4" x 18-3/8". Weighs 40 lbs.

Product Details:
Hewlett Packard Spectrum Analyzer. 1kHz-110mHz. 141T Display, 8552B IF Section, 8553B RF Section. Scan width 200 Hz-100mHz. Rated sensitivity: -142dBm to 10dBm. A 1970's classic in good working condition. Variable persistence display from 0.2 seconds to 60 seconds. Display: 7 cm x 9 cm. Supply voltage 100/120/220/240 vAC. 48-66 Hz. S/N Prefix 1615A. 16-3/4" x 8-3/4" x 18-3/8". Weighs 70 lbs.

Product Details:
General purpose relay module. NEW!!

Product Details:
32 channel armature relay multiplier. NEW!!

Product Details:
64 channel armature relay multiplier. NEW!!

Product Details:
Breadboard module. USED.

Product Details:
This beauty may have been from the 50's. Requires 1D cell battery. Sold as-is. Has not been tested.

Product Details:
Digital Mini PH meter is made by VWR Scientific Inc. Uses 9v batteries. Used but in excellent condition. Complete with carry case and bottles for sample test liquids.

Product Details:
Omega benchtop electronic load. Input: 88 - 135v AC @ 50/60 Hz. Output: 0 - 60v DC @ 0 - 60 amps, 750 watts. 17" x 7" x 5.5"H. Used. Tested - guaranteed. Every bench should have one of these test loads for maintaining low voltage power supplies.

Product Details:
Hewlett Packard 183B scope frame. No plug-ins. Rack mountable. 19" x 5-1/4" x 21-38". Weighs 33 lbs. Sold as-is. Original price in 1970: $1925. Our price...

Product Details:
You decide what to do with this dandy. Brand new Rockwell machines with Tektronix video copier. 75 ohm coaxial video input. 115 / 220v. Brand new! 22" wide x 33-1/2" deep x 38" high. NSN 5836-01-124-6257. We have 2.

Product Details:
Marconi XH14 receiver. Includes Collins 455FA 120, 12kc mechanical filter. Sold for parts only. No cabinet. Condition unknown. Only 4 pieces in stock.

Product Details:
Hewlett Packard transmission / reflection kit. 50 ohms. 8407A accessories.

Kit Includes:

• 8721A Directional Bridge
• 11652-60009 Power Splitter
• Cables and connectors

Product Details:
Hewlett Packard S-Parameter test set. 300 KHz - 3 GHz, 50 ohms. Source: Bogdan.

Product Details:
Taylor Hobson auto-collimator, Type B.I. with lamp. 1 division = 1 second. Used for non-contact measurement of angles. Includes cable, 3 extra bulbs and transformer. In original, solid wood case, original hardware. Keys are missing. Sold as-is. Manufactured in Leicester, England.

Product Details:
Test set semiconductor. Includes probes. Appears complete, with manual. Source: Bogdan. NSN: 6625-00-764-5783.

Product Details:
Hewlett Packard S-Parameter test set. 0.5 - 18.0 GHz. Includes 8411A harmonic F18 converter. 0.11 to 18 GHz.

Product Details:
Hewlett Packard S-Parameter test set. 0.1 - 2.0 GHz. Excellent condition. Source: Bogdan.

Product Details:
Microwave crystal test set. 5-3/4" x 5-3/4" x 3"H.

Product Details:
General Microwave automatic peak power meter. 17" x 19" x 7"H.

Product Details:
Vintage Globe open circuit tester. Test battery cells. New, unused. Only one available.

Product Details:
General Resistance "Dial-An-Amp" adapter. Banana plugs in / out.

Product Details:
HP Test Fixture. Provides electrostatic & light shielding for stable PA measurement. 50Hz - 2Mhz range.

Product Details:
Leader LCR bridge. .001 ¦ to 11M ¦. 1pf to 11,00UF. .1uh to 110H.

Product Details:
Rod-L Electronics M100AV Hi-Pot tester. Self-contained Hi-Pot tester for potential testing of equipment. Only one available.

• Input: 115 / 230v ±10%, 44 - 66 Hz
• Output: 250vA max
• Dimensions: 17" x 13" x 5.5"H

Product Details:
Fluke calibrator, covers most all lab calibration needs. 8-3/4"H x 17"W x 22"D. Excellent condition. Manual available $125. ¢The Fluke 5101A Calibrator has a wide range of DC voltages and current: AC voltages, current and dBm: and resistance output which is programmable from the front panel or through the optional remote interface.¢The 5101A has all the features of the Fluke Model 5100A plus an integral storage system of a memory and tape cassette which allows the operator enter or record a program to step the calibrator through a predetermined sequence.¢Some common features of this series is DC voltages of 0 V DC to 1100 V DC and DC current of 10 uA DC to 2 ADC: AC voltages of 1 mV AC to 1100 VAC @ 400 Hz and a 20 VAC maximum 20 kHz to 50 kHz and AC current of 10 uA AC to 2 A AC: and resistance of 1 ohm to 10 Mohm and a four terminal measurement capability of 1 ohm to 10 kohm.

Product Details:
Shester engineering magnet magnetizer. This supply will magnetize any magnet. All magnets need initial and maintenence magnatizing. 250lbs.Input: 120v, 60Hz, 20a 1 phaseOutput: 0 - 115v, 0-21A, 0-47,000. Aj DC. 10-1/2" x 13 deep x 20-1/2"W.Dimensions: 17" x 13" x 5.5"H