Terminations: Coaxial / Broadcast

Product Details:
Bird 8787D 7.5kw, 50 ohm termination. 3-1/8" unflanged connector with recessed center conductor DC to 1 GHz. Conduction cooled, continuous duty cycle. Includes 225°c over-temperature thermal switch. Vertical mount only. New in original shipping crate with manual. Permanently mounted on 4 wheel dolly. 24" x 20" x 45-5/8"H.

Product Details:
Custom 6Ω Non-Inductive Dummy Load. Uses 8-Carborundum 888SP1R0K Non-Inductive Resistors with the NSN:5905-831-8632.
This device could easily be configured to 8Ω audio load.

Product Details:
This dummy load is mad with non-inductive wire wound resistors. This device is used for broadcasting. This device has no quick connect.

Product Details:

Originally a 50 ohm, full gallon load. We have no 50 ohm units left, only 70-90 ohm.

Resistor submerged in oil. We have dozens of these beauties that came from Scientific Radio that had been used around their plant. All are used and missing the little cover over the output box on top. To ship (surface only) we remove the lid and place it on a brand new paint can, with packing on the inside for shock protection. We then take the new lid and put it on the Cantenna (with shipping clips), to seal the non-pcb oil in. Now the two cans are ready for transport. Sounds simple eh? Limited quantities available.

Product Details:
Bird dummyload. 50 ohm. Water cooled. 200 watts. No water. Kilowatt+ with water circulation. Bird QC connector "N". Same as Bird 6733. Used, but in good condition.

Product Details:
Bird Termaline® termination with 120w / 600w / 1200w directional coupler. 1000 watts continous, 1200 watts 1/2 hr. 50 ohm. 30 - 500 MHz. Model 6835. Removed from service but very clean. Only one available.

Product Details:
Bird dummyload coaxial resistor. 1000 watts, 50 ohm, 2500 MHz. 1-5/8" "EIA" QC connector. Oil filled / air cooled. Includes 230º thermal switch. 16-3/4" x 6" x 9-1/4"H. This load is equipped with a BIRD QC connector which accepts many different series with a 'quick change'. Increase capacity by forcing air from bottom up. We will change connector to "N" female and rebate $50.00. Brand new, never used!!

Product Details:
Bird termination. 1000 watts, 50 ohm, 30 - 500 MHz. 1200 watt - 1/2 hour. "N" female, QC connector. Built-in directional coupler with selectable ranges: 120 / 600 / 1200w. 6-1/2" x 26" x 11"H. Includes calibration chart. New, unused.

Product Details:
Dual RF Termination with fan. Dielectric. 6,250 watts, 50 ohm. 3-1/8" EIA. Can be set in manual or automatic fan mode. 15" x 24" x 17"H. Brand new!! Made for Harris. Harris P/N: 700-0627-000.

Product Details:
Dielectric RF termination. 1500 watts continuous, 50 ohm. "N" female QC connector. DC-1000 MHz. Built-in sensor to operate. 6.5" x 24" x 12" high.

Product Details:
Microwave Devices model 634.14. "LC" female, only 1 available.

Product Details:
RLC oil dielectric load handles 500 watts continuously or 1000 watts with forced air. Permanent "LC" female input. 6" x 8-1/2" x 20-1/4". Used.

Product Details:
Harris 50 ohm, 210 watt dry or for 5kw submersed. Front flange 4-1/2" outer diameter, 13-1/2" internal depth.

Product Details:
Electro Impulse Inc. 10 kw dummyload with "C" connector input. Includes "C" to "N" female adapter. Scope tap "N" female connector. Light weight assembly incorporates 24 Carborundum resistors in combination. 115 vac fan cooling. Currently configured for 75 ohm load. Provision for adding 8 more resistors to change termination resistance to 50 ohms.

• Dimensions: 20" x 21" x 33"H

Product Details:

Purchase 8 of our (RNI) 00390-325A 890AS Carborundum resistors at the same time for $600 to make about a 50 ohm load.

NOTE: This deal is only good with the purchase of the (RF) DACT-14C 10 kw dummyload.

Product Details:
RF Termination oil dielectric load handles 1500 watts continuously or double with forced air. "LC" female input. 6-1/2" x 11" x 25-3/4". Used. This is our last load in this series and a small leak has developed on the resistive unit o-ring. Mineral oil drained. Element measures 51.5 ohms. Price reduced.

Product Details:
Gates 10kw dummy load. 100% sine wave modulation for long periods - essentially non-reactive. Rated from 200KHz and 2,000KHz. 50 ohms. Four under chassis fans for air cooling. New, unused but shelf worn for 30+ years. 29-5/8" x 26" x 16-3/8".

Product Details:
Electro Impulse spare fan blade for dummy load. 18" diameter. New, unused. Harris P/N: 700-0258-000.