Meters: RF Watt / Power & Signal Strength

Product Details:
Highest quality, sealed, ruggedized watt meter. Scales: 0 - 1.0 Linear, 0 - 1.2 Log. Full scale = 100 µadc. 3-1/2" diameter face. 2-3/4" hole required. 1-7/8" behind panel depth. Sunair P/N: 6032-1032-00.

Product Details:
Sonar Radio Corp. "S" meter. 0 - 30 dB. Full scale = 1 mA. Mounts in 1.5" hole by four (4) corner studs on back. 1-1/8" behind panel depth.

Product Details:
Gates Radio Company panel meter. 0 - 4.0 kilowatts. FS = 100 µadc. Bezel measures 2-7/8" x 3-3/8" x 1-3/4" deep. 2-1/4" c-c mounting studs. Requires 2-3/4" diameter hole. Gates P/N: 632-0928-000.

Product Details:
Collins power meter. Measures reflected power. 0 - 25 watts. "N" male, "N" female. 1"D meter. Press button for reflected reading. Removed from equipment.

Product Details:
General Electric 40 kw meter, actual fs = 1 mADC. 3-1/2" square.

Product Details:
Scale reads "0-10 KV RF" but actual fs= 0-200 µadc, 1K Ohm. 4-1/2" wide x 4-1/4" high. 2-3/4" hole, 1-1/2" behind panel.

Product Details:
Weston panel meter. Power 0 - 6 / VSWR 1 - 100. FS = 200 µadc. 4" x 4-1/2" x 1-7/8" deep. Requires 2-5/8" diameter hole. Gates Radio Co. P/N: 632-0548-002.

Product Details:
Modutec panel meter. 0 - 60 kilowatts / 0 - ¢ vswr. FS = 100 µa. 4" x 5" x 1-5/8" deep. Requires 2-5/8" diameter hole. Harris P/N: 632-0952.

Product Details:
Modutec VSWR panel meter. Mirrored arc scale.0 - 120 kilowatts, 1 - ¢ VSWR. FS = 100 µadc. 4" x 5" x 1-5/8" behind panel depth. Requires 2-5/8" diameter hole. Harris P/N: 632-0905-000.

Product Details:
General Electric panel meter. Type D0-92. 0 - 125, 1.1 - 110 Percent Power. FS = 50 µA. 4-1/2" x 4-13/16" x 1-7/8" deep. 3-9/16" x 4" c-c mounting studs. Requires 2-3/4" diameter hole. Harris P/N: 632-0811-000.

Product Details:
Weston panel meter. Carrier 0 - 200. FS = 5 madc. Bezel measures 3-1/2" diameter x 1-7/8" deep. Requires 2-3/4" diameter panel hole. Harris P/N: 632-0245-000.

Product Details:
Modutec SRS SR-380 multimeter. 3700 ohm. FS = 100 µa. Mounts by four, 6/32 studs on rear. 1.75" x 2.237", 1.55" behind panel depth. Requires 1.5" diameter hole.

Product Details:
API edgewise shielded meter. "Peak Power". 2 scales: 0 - 130% and 0 - 3.0 vswr, fs = 50 µA. 1-5/16" x 3" wide with flange mount, 3-1/2" deep. Harris P/N: 6320913.

Product Details:
Varia "S" meter. S2 - S9 to 40 dB over S9. 70's CB era. Fits 1/2" x 11/16" hole. Mounts from rear by ears 1-3/16" c-c. Full scale = 300 µA.

Product Details:
"S" / power meter from the 1970's CB era. Fits 7/16" x 11/16" hole. No visible mounting means. (Glue?). Full scale = 500 µA.

Product Details:
Citizen's band radio "S" meter. Edgewise, vertical mount. No mounting hardware. 2 - 9 "S" units + 20 - 40 dB over "9". Full scale = 2.5 mA. Fits 5/8" x 1-1/4" hole. 1-1/4" behind panel depth. 9,000 pieces available.

Product Details:
Marconi Instruments ammeter has no divisions except for "Set Carrier" point @ 3/4 scale. Full scale = 100 µA. "Set Carrier" is 70 µA.

Product Details:
Wacline sealed, edgewise meter reads "RF Deviation 1.0 - 0 - 1.0". Full scale is 50 - 0 - 50 µADC. 1" x 2" view area, 3-1/2" behind panel depth.

Product Details:
Mfg: API 0 - 12 rf power. 41 - 74 ma lock range. SPDT alarm set point. 2 1/8" hole required. 1 7/8" behind panel depth. FS 50µadc. 5k Ω. Shielded - sealed case. NSN: 5945-00-484-5375.

Product Details:
Honeywell meter with removable metal bezel. "0 - 120 watts", but actual full scale = 0 - 200 µADC, 750 ohm. 3-1/2" diameter, 2-5/8" hole, 1-1/2" behind panel. Sealed. New!! Made in 1966. NSN: 6625-00-692-6566.

Product Details:
Roller Smith antique watt meter. Ruggedized, sealed. Scale: 0 - 200 watts. FS = 200 µadc. Requires 2-1/8" hole. 1-5/8" depth, 2-3/4"D face. Made in the USA.

Product Details:
Build Your Own Meter!! Roller Smith antique watt meter. Ruggedized, sealed. FS = 200 µadc. Dial plate NOT included. Requires 2-1/8" hole. 1-5/8" depth, 2-3/4"D face. Made in the USA.

Product Details:
E.I.L "VSWR" meter. Full scale = 50 mV. 3.5" diameter face. 2.75" hole required. 2.1" behind panel depth. Removed from new equipment.

Product Details:
Phaostron sealed, ruggedized meter indicates "0 - 2 kw", but actual fullscale = 0 - 100 µADC. 2-5/8" diameter, 2" hole required, 1-1/2" behindpanel.

Product Details:
Modutec multimeter. FS = 100 µADC. 2-7/8" x 3-5/8". 1-3/4" behind panel depth, 2-5/8" diameter hole required. Harris P/N: 632-0991-000.

• 0 - 50
• 0 - 10
• 0 - 400 RF watts
• 0 - 40 Reflected watts

Product Details:
Modutec panel meter. 0 - 300 kilowatts / 0 - ohm vswr. FS = 100 mv. 4" x 5" x 1-5/8" deep. Requires 2-5/8" diameter hole. Harris P/N: 632-0906.

Product Details:
EIL Instruments sealed meter. Several scales. Actual fs = 1 mADC. 3" diameter.

Product Details:
API dual locking coil meter relay. 0 - 50 µA full scale. Marked from 0 - 20 kw. 3-1/2" diameter. Requires 2-5/8" hole. 2-1/4" behind panel depth. Model 355-C. NOTE: See PDF for full details (Drawing No. 14). NSN: 5945-00-815-5949.

Product Details:
Bird 43 actual 30 µADC replacement meter. 3-1/2" face. Fits 2-3/4" hole.

Product Details:
EIL meter. Full scale: 100 µADC, 0 - 1.0 kw. 2-5/8" outside diameter face, 2"D hole required. NSN: 6625-01-007-9675.

Product Details:
Simpson wattage meter. 0 - 150 watts. Calculates wattage by measuring voltage and current simultaneously. 150v max, 2 amps max. 4 terminals: 2 for voltage, 2 for amps. 4" x 4-5/8", 2-3/4"D hole required. New, but some shelf marks and scuffs.

Product Details:
Simpson wattage meter. 0 - 300 watts. Calculates wattage by measuring voltage and current simultaneously. 150v max, 4 amps max. 4 terminals: 2 for voltage, 2 for amps. 4" x 4-5/8", 2-3/4"D hole required. New, but some shelf marks and scuffs.