150 Volt to 2kv Power Supplies

Product Details:
Fluke power supply. 0 to 2.1 kvdc in 0.1v steps. 15 ma. BNC output. Vacuum tube regulation in a retro 1970's linear design. The only switching in this power supply is the power toggle on the front panel. 19" rack x 3-1/2" high.

Product Details:
High Voltage Power Supply, part of the SL series. The SL Series, is known for typically being compact, rack-mountable units that offer a range of output voltages and power levels.
LCD Readout, controlled by 10 turn POTS on front panel or remotely from the rear. This unit is in EXCELLENT condition.

Optional HV Cable available for $250.00, add to your notes on order to include HV Cable or email customer service with your order number
Optional Floating Ground available.

Product Details:
This Battery Charger is in like NEW condition! This piece of equipment was used by the military to charge various types of batteries. It was designed to be portable for field use!

Product Details:
Matsusada power supply. Mfg. P/N: 210000198. Brand new!

• Input: 220v, 1 phase or 3 phase
• Output: 0 to 150v DC @ 3 kw / 20 amps
• Ripple: 30 mv / 40 ma
• Dimensions: 3-1/2"H x 19"W x 19"D

Product Details:
Sorensen / Elgar 30 kw DC power supply. Digital voltage and current displays. Over current, over voltage, over temp, surge limit, soft start, brown-out and short circuit protection. Up to 99 programmable automatic voltage and current steps; up to 99,999 seconds long each. Analog and IEEE-488, RS252 remote programming. Three operation modes: constant current, constant voltage or constant power. Hubbell 50A twist-lock connector. Like new condition.

• Input: 432 - 528v AC, 3 phase @ 63Hz
• Output: 0 to 250v DC @ 0 to 120 amps
• Dimensions: 10-1/2" x 19" x 22"
• Weight: 200 lbs

Product Details:
Sorensen 30kw DC power supply. Digital voltage and current meters and controls. Allows external analog controls. Hubbell 50A twist-lock connector. Used, like new condition.

• Input: 432 - 528v AC, 3 phase, 47 - 63 Hz
• Output: 0 to 250v DC @ 120 amps
• Dimensions: 10-1/2" x 19" x 25"
• Weight: 160 lbs

Product Details:
Lambda ESS 400 37-2 15kw DC power supply. Dual digital meters for current and voltage. Front panel has voltage and current controls and adjustable OVP control. Full array of status inducators. Can be remote monitored and controlled. New from factory. Includes manual.

• Input: 220v AC, 3 phase 50/60 Hz
• Output: 0 to 400v DC @ 0 to 37 amps

Product Details:
Lambda High Voltage Power Supply 1500w, 0-10 v program voltage (onboard). Drives unit to POS 0-1kv DC primarily used for LASER charging.

Product Details:
Power Ten, Inc. 30kw DC power supply. (Made by Sorensen). Front panel digital voltage and current meters and controls. Allows external analog controls as well. Hubbell 50A twist-lock connector. Used, like new condition.

• Input: 432 - 528v AC, 3 phase, 47 - 63 Hz
• Output: 0 to 250v DC @ 0 to 120 amps
• Dimensions: 10-1/2" x 19" x 25"
• Weight: 160 lbs

Product Details:
Bertan Associates Inc. 214 high voltage power supply. Current limits at 17 ma. Turns counter on 20 turn pot displays actual voltage within 1 to 2 volts of output. Positive or negative ground on front panel. "MHV" connector on rear panel, negative ground only.

• Input: 115v AC or 230v AC
• Output: 0 to 1kv DC @ 15 ma
• Dimensions: 7-3/4" x 5-1/4" x 9" deep
• Weight: 16 lbs

Product Details:
Glassman high voltage power supply. Front panel voltage and current adjust via 10-turn pot. Digital output meters. "SHV" HV connector. Can be remoted via DB-15 on back panel. Currently set to negative output. Can be switched to positive output by swapping 2 internal PC boards. Includes arc quenching and arc sense features. Like new condition. Manual included.

• Input: 120v AC, 48 - 420 Hz
• Output: 0 to ±1kv @ 300 ma
• Dimensions: 1-3/4" x 19" x 20-1/4"

Product Details:
Glassman high voltage power supply. Front panel voltage and current adjust via 10-turn pot. Digital output meters. "SHV" HV connector. Can be remoted via DB-15 on back panel. Currently set to negative output. Can be switched to positive output by swapping 2 internal PC boards. Includes arc quenching and arc sense features. Brand New! Manual included.

Product Details:
Bertan high voltage power supply. Reversible polarity. Works to full output. Analog meter on front panel. MHV connector out. Includes manual.

• Output: 0 to ±1kv @ 0 to 30 ma
• Dimensions: 3.5"H x 19"W x 9.6" deep

Product Details:
Glassman high voltage power supply. Reverse circuit board inside to change output polarity. (Now set to Negative). Output is SHV connector. Analog meters on front panel. Voltage & current adjust. SHV cable NOT included. AC cord included. Used, but excellent condition.

• Input: 115v AC, 48 - 63 Hz, 1 phase
• Output: ±1kv @ 300 ma
• Dimensions: 19"W x 3-1/2"H x 18" deep

Product Details:
Glassman power supply. Front panel voltage and current adjust via 10-turn pot. Digital output meters. "SHV" HV connector. Can be remoted via DB-15 on back panel. Currently set to negative output. Can be switched to positive output by swapping 2 internal PC boards. Includes arc quenching and arc sense features. Like new condition. Manual included.

• Input: 120v AC, 48 - 420 Hz
• Output: ±0 to 1kv @ 300 ma
• Dimensions: 1-3/4" x 19" x 20-1/4"

Product Details:
Electronic Measurements Inc. power supply. Front panel voltage and current limiting / digital voltage and current meters. Can be remoted by rear terminal strip. 10 turn voltage adjustment, 1 turn current limit. Includes manual. NOTE: Units are set for 115v AC operation. Easily changed to 230v AC via internal jumper (included).

• Input: 115 & 230v AC @ 15 amps, 47/63 Hz
• Output: 0 to 600v DC @ 0 to 1.6 amps DC
• Dimensions: 17" x 17" x 1-3/4", 19" rack mount

Product Details:
Glassman DC power supply. 1000 watts. Digital meters, voltage and current. Front panel controls. Grounded, hard wired AC receptacle on 18" pigtail. No manual. Primary voltage selected 115v or 230v inside with jumper plug.

• Input: 115v / 230v, 47-63 Hz
• Output: 0 to 600v @ 0 to 1.7 amps
• Dimensions: 1-3/4"H x 19" x 19"

Product Details:
DECC AC / DC Converter. Portable aircraft power supply. Circular connectors in / out power. Built-in casters. Brand new in crates!!

• Input: 440v AC / 3 phase / 60 Hz
• Output: 270v DC / 8 kw
• Dimensions: Base 17" x 8-1/2" x 17-3/4"H + 3" wheels
• Shipping Weight: 200 lbs

Product Details:
Vacuum tube amplifier power supply. This new power supply was removed from a larger chassis on Harris broadcast assembly. It operated all B+ and filaments on a 5 tube amplifier. Includes transformer and one 20/20, 450v & one 10/15/15, 450v multi-section caps. 3" x 4-5/8" chassis. 2-1/2" high.

Product Details:
High stability regulated power supply.

• Output: 160v DC @ 0.1 amps
• Dimensions: 5" x 4-1/4" x 5-1/2"H

Product Details:
MFN - Computer Products power supply.
NSN: 6130-01-033-9919.

• Input: 120v, ±10%, 50-400 Hz
• Output: 250v DC @ 10ma
• Dimensions: 2-3/4" x 2" x 4-3/4"

Product Details:
Fluke 0-2kv DC, 5ma. Fluke dial-up power supplies are all rack mount, 10.5" high. Appears complete. Sold as is. From Los Alamos Lab.

Product Details:

Glassman high voltage power supply. Reversible polarity. SHV output connector. Front panel voltage and current 10 turn pot controls. Digital LCD displays. Alt P/N: M8992C1-02DD991201.

• Input: 208v, 1 ph, 48-63 Hz
• Output: ±1kv @ 2.8 amps
• Dimensions: 19" x 23" x 7"

Product Details:
Glassman Europe power supply. Voltage and current adjustable on front panel. Digital meters for voltage and current. 120 / 230 vac selected by jumper plus inside. Can be remote controlled. Screw terminals for AC power. Manual included. Works to full output.

• Input: 120v / 230v AC
• Output: 0 - 300v @ 0 - 3.5 amps
• Dimensions: 1-3/4" x 19" x 19"

Product Details:
Spellman HV power supply. 0 - 1 kvdc @ 350 mA. 115v input. 10-3/4" x 3-1/4" x 11-1/2" deep. Includes manual.

Product Details:
Technipower highly regulated power supply module.

• Input: 105 - 125v AC @ 50 - 400 Hz
• Output: 184v DC @ 0.75 amps DC
• Dimensions: 6-3/4" x 6-1/2" x 7"H

Product Details:
Electronic Measurements Inc. regulated variable DC power supply with digital volt / amp metering. Precision "ten turn" variable control knobs for precise voltage and current adjustments. Provides constant voltage and / or constant current. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", also, rear panel connections are provided with remote sense and voltage programming / tracking capabilities. Accurate to ±0.01%. Includes operation manual, excellent condition.

• Input: 190 - 250v, 3 ph AC, 50/60 Hz @ 23 amps
• Output: 0 - 250v @ 0 - 20 amps
• Dimensions: 19" rack width x 23" deep x 5"H

Product Details:
Kikusui regulated variable DC power supply with analog volt / amp metering. This power supply provides a single, 0 - 160 volts @ 0 - 0.4 amps output with a ten turn fine adjustment control knob for constant voltage and a control for constant current adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Includes copy of the operation manual.

• Output: 0 - 160 volts @ 0 ¢ 400 ma
• Dimensions: 10" x 4" x 6"H

Product Details:
Kikusui regulated variable DC power supply with analog volt / amp metering. Precision, bench / lab. Incorporates a ten-turn fine adjustment control knob for voltage and a control for current adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Includes copy of the operation manual.

• Output: 0 - 250 volts @ 0 - 250 ma
• Dimensions: 10" x 4" x 6"H

Product Details:
Power Ten precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. "Ten-turn" precision variable control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars". Additional connections provided for remote voltage sense and programing.

• Output: 0 - 150v @ 0 - 12 amps
• Dimensions: 19" x 19" x 3.5"H

Product Details:
Lambda (Electronic Measurements Inc.) Model ESS150-16-15-D-TC-CE precision, bench / lab, regulated variable DC power supply with digital volt / amp metering.

• Input: 230v AC @ 24-amps ±10%, single phase, 50/60 Hz
• Output: 0 - 150v @ 0 - 16 amps
• Dimensions: 20" x 19"w x 3.5"H

Product Details:
Kepco power supply. No meter, banana jacks for output.

• Output: 0 - 155v DC @ 1 amp
• Dimensions: 15"D x 19"W x 3.5"H

Product Details:
Sorensen precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. In addition, rear panel connections provide: voltage output, remote sense and voltage programming / tracking capabilities.

• Output: 0 - 300v @ 0 - 1.25 amps
• Dimensions: 17"D x 19"W x 5.25"H

Product Details:
Kepco triple output power supply with center-tap output for tube filaments. Precision bench / lab, regulated, variable DC power supply with and dual analog volt / amp metering. Power supply is constructed using the finest components, "mil-spec" construction methods and is the perfect piece of professional gear for use in designing and repairing tube audio and other electronic equipment. Fully regulated up to 500ma output, with dual range metering for voltage (0 - 150v, 0 - 600v) and 0 - 500m current metering. Two sets of seven (7) output connections are standard "banana" type 5-way binding posts and are provided on the front-panel and on the rear-panel.

• Output #1: 0 - 600v @ 0 - 500 mA
• Output #2: 0 - 150v DC @ 0 - 5 mA (negative bias supply)
• Output #3: 6.3v AC @ 20 amps (isolated)
• Dimensions: 17" x 19"w x 11"H

Product Details:
Power Ten precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming. RS-232 and IEEE control from rear.

• Input: 195 - 250v AC, 3 phase, 60 Hz
• Output: 160v @ 0 - 93 amps
• Dimensions: 25"D x 19"W x 5.25"H

Product Details:
EMI Lambda brand, (Electronic Measurements Inc.) precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. The DC supply provides constant voltage and / or constant current. Includes the adjustable over-voltage "crowbar" protection option.

• Input: 190 - 250v AC, 50/60 HZ, 1 or 3 ph
• Output: 0 - 600v @ 0 - 4 amps
• Dimensions: 21" x 19" x 3.5"H

Product Details:
EMI Lambda brand (Electronic Measurements Inc.) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Input power. Precision "ten turn" variable control knob for precise voltage adjustment and single turn control for current adjustments. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", also, rear panel connections are provided with remote sense and voltage programming / tracking capabilities.

• Input: 190 - 250v AC @ 18 amps, 1 phase, 50/60 Hz
• Output: 0 - 300v @ 0 - 6.5 amps
• Dimensions: 21" x 19" x 3.5"H

Product Details:
Lambda (Electronic Measurements Inc.) Model ESS150-16-15-D-TC-CE precision, bench / lab, regulated variable DC power supply with digital volt / amp metering.

• Input: 230v AC @ 24-amps ±10%, single phase, 50/60 Hz
• Output: 0 - 150v @ 0 - 16 amps
• Dimensions: 20" x 19"w x 3.5"H

Product Details:
Kepco precision, bench / lab, regulated variable DC power supply with analog volt / amp metering. Variable "ten turn" control knobs for precise voltage and current adjustments. The DC supply provides constant voltage and / or constant current. The dual range analog meters provide accurate readings of both voltage and current. The output connections are front and rear panel "5-way" binding posts, rear panel "barrier strip" type terminals. And rear panel connections are also provided for remote sense capabilities.

• Input: 115 / 230v @ 17 / 9 amps, 50-65 Hz
• Output: 0 - 150v @ 0 - 7 amps
• Dimensions: 21" x 17" x 5"H

Product Details:
Lambda differential voltmeter LS-DM6 plugin with precision power source LS-516A. 5-way banana jack output.

• Output: 0 - 250v DC @ 100 mA
• Dimensions: 12" x 8.5" x 5.5"H

Product Details:
Hewlett Packard precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Precision "ten turn" variable control knobs for voltage and current adjustments. The analog meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. In addition, rear panel connections provide remote sense and voltage programming/tracking capabilities. Includes operation and service manual.

• Output: 0 - 320v @ 0 - 0.1 amps
• Dimensions: 14" x 8.5" x 3.5"H

Product Details:
CPS high voltage power supply. No further documentation.

• Input: 28v DC
• Output: 0 - 2kv DC @ 5 mA
• Dimensions: 8" x 4.5" x 2.5"

Product Details:
Sorensen (division of Elgar Inc.) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Digital keypad entry for accurate voltage and current settings. The digital meters provide accurate readings of both voltage and current and the output connections utilize protected threaded-stud buss-bars. Rear panel connections provide remote sense and voltage / current programing / tracking capabilities. Includes the a fully adjustable over-voltage "crowbar" protection feature.

• Input: 90 - 250v AC, 50/60 Hz, 3 ph
• Output: 0 - 150v @ 0 - 166 amps
• Dimensions: 27" x 19" x 10.5"H

Product Details:
Lambda precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Precision "ten turn" variable control knob for precise voltage and single turn control for current adjustment. Provides constant voltage and / or constant current. The digital meters provide accurate readings of both voltage and current and the output connections are high current "threaded studs" with washers and nuts. In addition, other rear panel connections provide remote sense and voltage programming/tracking capabilities. Complete with copy of manual.

• Input: 208v AC, 3 ph
• Output: 0 - 300v @ 0 - 10 amps
• Dimensions: 22" x 19" x 7"H

Product Details:
EMI Lambda (Electronic Measurements Inc.) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Input power. Precision "ten turn" variable control knobs for precise voltage and current adjustments. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", also, rear panel connections are provided with remote sense and voltage programming / tracking capabilities. Includes copy of the operation manual.

• Input: 342 - 440v AC @ 50 amps, ±10%, 4 wire, 3 ph, 50/60 Hz
• Output: 0 - 424v @ 0 - 37 amps, 15.7kw
• Dimensions: 25" x 19" x 8.75"H

Product Details:
Lambda EMI 30kw linear power supply. High quality superior design Lambda linear (transformers, not switching) supply. Front panel voltage and current adjustment along with large digital readouts. Unique local and remote start-stop feature as well as a full pallet of remote programming options. Low ripple . ±0.4v regulation. 20 foot long AC input snake. Tested at full load and guaranteed 60 days.

• Input: 187 - 243v AC (220v nominal) 57-63 Hz, 3 phase
• Output: 0 - 400v DC @ 0 - 75 amps
• Dimensions: 31" deep x 27" wide x 38.7" high cabinet mounted on steel casters

Product Details:
Heath tube regulated high voltage power supply.

• Input: 115v
• Filament Voltages: 6.3v AC @ 4 amps or 12.6v AC @ 2 amps
• C or Bias Voltage: 0 to 100v DC @ Bias Supply (C-) / 0 to 400v DC @ 100 mA Plate Supply (B+)
• Dimensions: 13.38"W x 11.75"D x 5.5"H
• Weight: 16 lbs

Product Details:
Eico regulated benchtop power supply. 2 prong AC plug. Checked out. Working.

• 0 - 150v DC @ 2 mA
• 0 - 400v DC @ 150 mA
• 6.3v AC @ 3 amp
• 6.3v AC c.t. @ 3 amp
• Dimensions: 12-5/8" x 8" x 9"H

Product Details:
Lambda High Voltage Power Supply 0-10v program voltage (on board) Drives unit to positive 0-1000v DC. Primarily used for LASER charging. 1000 j/sec.

Product Details:
Lambda DC regulated power supply. LP-534-FM. Load / voltage tested 100%

• Output: 0 to 120v @ 0 to 1.2 amp
• Dimensions: 17" x 8" x 5" tall.

Product Details:
Kepco model BOP 1000M high voltage bipolar power supply / amplifier. Voltage gain: 100. Current gain:4. Voltage stabilizing or current stabilizing modes 40 w, linear 4 - quadrant operation. FET output stage. Vaccum tube regulator - (8) 8068 tubes.

• Input:115v
• Output: - 1000 + 1000v DC @ - 40 to +40 mA
• Dimensions: 16 1/2"W x 18" deep. 7 1/4"H.

Product Details:
Kepco power supply. 0-1000v DC, 0-200 madc, 200 watts. .025% voltage & current accuracy. 19" rack, 5-1/4"H x 15" deep. 115/230v AC, 50/60 Hz input. Programmable by front keypad or RS232 or IEEE 488. Like new condition.

Product Details:
Kepco power supply. 0-2000v DC, 0-100 madc, 200 watts. .025% voltage & current accuracy. 19" rack, 5-1/4"H x 15" deep. 115/230v AC, 50/60 Hz input. Programmable by front panel or RS-232 or IEEE 488, 45lbs. Excellent Condition.

Product Details:
Kepco power supply. 0-500v DC, 0-400 madc, 200 watts .025% voltage & current accuracy. 19" rack, 5-1/4"H x 15" deep. 115/230v AC, 50/60 Hz input, 4.0/2.1A. Programmable by front keypad or RS232 or IEEE 488. Excellent condition. Refurbished-ready to go. SN C71303.