Thirty one to one hundred forty nine voltage power supplies, buy surplus and save! All types choose from regulated, linear, switching, adjustable; from SurplusSales of Nebraska.
Product Details: Acopian power supply. Front panel voltmeter and ammeter, voltage control. Rear panel current limiting. Remote sensing. Rear panel terminal strip. Like new.
Product Details: SRL60-8 is part of the SRL Series, known for its reliable performance in various applications. Adjustable from front panel and remote.
Product Details: Tenma 0-60 vdc @ 0-1 amps. Dual analog voltage and current meters. Voltage and Current controls. Front panel 5 way binding post output terminals, floating ground. BMC Power cord. Hi-Lo current range. Very good condition. Constant current or constant voltage.
Product Details: Lambda Electronic Measurements power supply. Front panel voltage and current limiting / digital voltage and current meters. Can be remoted via rear panel terminal strip. 10 turn voltage adjust. One turn current limit. Includes manual.
Product Details: Elgar main frame AC power source. 19" rack width x 23" deep x 5-1/4" high. Like new, excellent condition. Complete with manuals. 2 available. Sold as a set with (PS) 9012 only.
Product Details: GP-IB programmable oscillator plug-in. Single phase. 45 - 4095 Hz. 3-3/8" x 7-1/4" x7-3/4" deep. Complete with service and operation manuals. 3 available.
Product Details: Electronic Measurements Inc. power supply. Front panel "lock nut" control of voltage, over voltage and current limit. Rack mountable / plug in. New!
Product Details: Omega benchtop electronic load. Input: 88 - 135v AC @ 50/60 Hz. Output: 0 - 60v DC @ 0 - 60 amps, 750 watts. 17" x 7" x 5.5"H. Used. Tested - guaranteed. Every bench should have one of these test loads for maintaining low voltage power supplies.
Product Details: Hewlett Packard precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering with variable "ten turn" precision control knob for voltage adjustment, and course and fine knobs for current adjustments. This power supply includes the optional, adjustable "crowbar" over-voltage protection.
Product Details: Kepco precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. This power supply provides a single, 0 - 100 volts @ 0 - 0.5 amps output with variable "ten turn" control knobs for precise voltage and current adjustments. The dual range analog meters provide accurate readings of both voltage and current. The output connections are rear panel 5-way binding posts. Rear panel connections are also provided for remote sense and remote programming capabilities. Complete with power cord.
Product Details: Lambda regulated, variable DC power supply with digital volt / amp metering. The digital meters provide accurate readings of both voltage and current and the output connections on the rear panel are high current "buss bars". Also, rear panel connections are provided with remote sense and voltage programming / tracking capabilities. Accurate to ±0.01%. Includes operation manual. Excellent condition.
Product Details: Kepco precision bench / lab, regulated, variable DC power supply with analog volt / amp metering, with variable "ten turn" control knobs for precise voltage and current adjustments. Includes an adjustable over-voltage "crowbar" protection feature. The analog meters provide accurate readings of both voltage and current. The output connections are rear panel "barrier strip" type terminals. Rear panel connections are also provided for remote sense and voltage programming / tracking capabilities.
Product Details: Hewlett Packard precision, bench / lab, regulated variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments , constant voltage and / or constant current. In addition this power supply includes the over-voltage protection option. The analog meters provide accurate readings of both voltage and current. The output connections are standard "barrier strip" high current terminals and front panel "banana" type 5-way binding posts (maximum 3 amps). Rear panel connections provide remote sense, voltage, and programming connections.
Product Details: Hewlett Packard precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. Constant voltage and / or constant current. Includes the optional, adjustable "crowbar" over-voltage protection feature. The analog meters provides accurate readings of both voltage and current and the output connections are a rear panel high current "buss bars". Rear panel connections are provided for remote sense and voltage programming / tracking capabilities.
Product Details: Voltampere power supply. Over voltage adjustable warning. Analog meters, fine and course voltage and current adjustments from front panel.
Product Details: The Lambda LLS5040 provides the flexibility required for today's ATE and system needs. The digitally controlled front panel is easy to use and provides precise control to the power supply. The Lambda LLS5040 has a unique design which takes care of essential housekeeping functions within the supply-allowing for a 50% size reduction. A digitally controlled front panel provides precise control of the power supply by using the "standby mode" to toggle between zero volts and last programmed value, by slewing up or down to the desired voltage setting or by entering a specific voltage/current value and immediately attaining that value. All functions are accessible via the front panel controls. The LLS5040 is capable of remote analog programming in either the voltage or current mode for critical test requirements. It is designed with user selectable 110/220 VAC operation, adjustable over voltage protection, constant voltage / constant current operation and indication.
Voltage: 0 - 40v
Current: 0 - 2 amps
Power: 80 watts
Constant Current and Voltage
Thermal Protection
User-Adjustable Overvoltage and Overcurrent Controls
Product Details: Lambda precision bench / lab, regulated, variable DC power supply with volt / amp metering. Variable fine and coarse control knobs for voltage and a knob for current adjustments. Provides 0 - 120v @ 0 - 0.065 amps constant voltage and / or constant current. The analog meter provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts.
Product Details: Lambda precision, bench / lab, regulated, variable DC power supply with volt / amp metering. Provides a single 0 - 40v @ 0 - 350 mA output with variable fine and coarse control knobs for voltage and a knob for current adjustments. The analog meter provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts.
Product Details: Power Designs precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. This power supply provides 0 - 6v and 0 - 60v @ 0 - 0.5 amps and 0 - 5 amps output with variable control knobs and switches for voltage and current adjustments. This power supply includes the adjustable over-voltage "output crowbar" protection option. The precision analog meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5 way binding posts. in addition, rear panel connections are provided for remote sense and voltage programming / tracking capabilities.
Output: 0 - 60v @ 0 - 5 amps
Dimensions: 12" x 8.5" x 5"H
This very compact power supply provides the following output voltages and amps:
Product Details: The Lambda LLS6040 provides the flexibility required for today's ATE and system needs. The digitally controlled front panel is easy to use and provides precise control to the power supply. The Lambda LLS6040 has a unique design which takes care of essential housekeeping functions within the supply allowing for a 50% size reduction. A digitally controlled front panel provides precise control of the power supply by using the "standby mode" to toggle between zero volts and last programmed value, by slewing up or down to the desired voltage setting or by entering a specific voltage/current value and immediately attaining that value. All functions are accessible via the front panel controls. The LLS6040 is capable of remote analog programming in either the voltage or current mode for critical test requirements. It is designed with user selectable 110 / 220v AC operation, adjustable over voltage protection, constant voltage/constant current operation and indication.
Voltage: 0 - 40v
Current: 0 - 4 amps
Power: 160 watts
Constant Current and Voltage
Thermal Protection
User-Adjustable Overvoltage and Overcurrent Controls
Product Details: Hewlett Packard precision, bench / lab, regulated, variable dc power supply / source, with precision thumb wheel voltage selection, and analog volt / amp metering. the analog meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. rear panel connections provide remote sense and voltage programming / tracking capabilities.
Product Details: Trygon precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. In addition, rear panel connections provide remote sense and voltage programming / tracking capabilities.
Product Details: Kikusui precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Precision "ten-turn" variable control knob for voltage control and a control knob for current adjustments. Provides 0 - 110v @ 0 - 1 amps constant voltage and / or constant current. Includes copy of the operation manual.
Product Details: Hewlett Packard power supply. Edgewise analog meters. Banana jack output. Course and fine voltage and current adjustment from from panel.
Product Details: Harrison Labs twin power supply. Independent course and fine controls while the meters have an "A-B" switch. Separate banana jacks for each supply.
Product Details: Lambda precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Variable control knobs for voltage and current adjustments. The digital meter provides precision readings of both voltage and current. The output connections are 1/4" studs, rear panel connections provide remote sense capabilities.
Product Details: Lambda precision, bench / lab, regulated, variable DC power supply with analog volt and amp metering. This power supply provides a single, 0 - 36 volts @ 0 - 115 amps, 4100w maximum output with fully front panel programmable control knob for voltage and current adjustments. Constant voltage and / or constant current. Includes an adjustable "crowbar" over-voltage protection feature. The analog meters provide accurate readings of both voltage and current. The output connections are heavy duty "buss bars", and standard "barrier strip" type wiring connections. In addition, connections are provided for remote voltage sense and gpib remote programming capabilities. Includes copy of the operation manual.
Product Details: Amrel precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knob for voltage adjustment, and a control knob for current adjustment. The DC supply provides constant voltage and / or constant current. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current threaded studs with additional connections provided for remote voltage sense.
Product Details: Power Ten brand (division of Elgar Corporation), model 4700D-40250 precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. Includes adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming. Includes a copy of the operation manual.
Product Details: Power Ten brand (division of Elgar Corporation), model 4700D-50200 precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. Includes adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming.
Product Details: Kikusui precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable control knobs for voltage and current adjustments. Constant voltage and / or constant current. Includes the adjustable over-voltage protection option. The analog meters provides accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Also, rear panel connections are provided with remote sense and voltage programming / tracking capabilities. Includes copy of the operation manual.
Product Details: Kepco precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable "ten turn" control knobs for precise voltage and current adjustments. Includes an adjustable over-voltage "crowbar" protection feature. The analog meters provide accurate readings of both voltage and current. The output connections are standard "banana" type 5-way binding posts, rear panel connections provide DC out, remote sense, voltage, and current programming connections. Includes copy of the instruction manual.
Product Details: The DCS Series System Supplies are 3000 watt supplies designed to provide highly stable, continuously variable output voltage and current for a broad range of development, system, and burn-in applications. The Sorenson DCS Series employs high frequency switching regulator technology to achieve high power density and small package size. Requires three phase 190-250 VAC input power, however it can be operated using single phase 200 - 250v AC with slightly reduced (2500W) output capacity.
Features:
Rated: 0 - 55v DC @ 55 amps, 3,025 watts
Input voltage: 190 - 250v AC @ 14 amps, 3 ph, 47-63 Hz or 200 - 250v AC @ 20 amps, 1 ph, 47-63 Hz
Simultaneous digital display of both DC output voltage and current
Ten-turn potentiometer voltage and current controls permit high resolution setting of the output voltage and current from zero to the model-rated output
Front panel push button control of Output Standby Mode, OVP reset, Remote Local Programming Mode selection, and preview of voltage, current, or OVP set points
External indicator signals for Remote Monitoring of OVP status, Local / Remote Programming status, Thermal Shutdown, and Output Voltage and Current
Current or Voltage Mode operation with Automatic Mode Crossover to respond to varying load requirements
Flexible output configuration where multiple units can be connected in series or in parallel to provide increased voltage or current
Product Details: Sorensen precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. Includes the optional, fully adjustable over-voltage "crowbar" protection feature. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. In addition, rear panel connections provide: voltage output, remote sense and voltage programming / tracking capabilities. Includes copy of the operation manual.
Product Details: Power Designs "auto ranging" precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. This power supply provides an auto ranging, 0 - 6v and 0 - 60v @ 0 - 0.5 amps and 0 - 5 amps output with variable control knobs and switches for voltage and current adjustments. This power supply includes the adjustable over-voltage "output crowbar" protection option. The precision digital meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5 way binding posts. in addition, rear panel connections are provided for remote sense and voltage programming / tracking capabilities. Similar to 6050C except meter volts / amps switch is toggle rather than pushbutton.
Output: 0 - 60v @ 0 - 5 amps
Dimensions: 12" x 8.5" x 5"H
This very compact, auto ranging power supply provides the following output voltages and amps:
Product Details: Lambda Electronics Measurements precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knob for voltage adjustment, and a control knob for current adjustment. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current threaded studs, with additional connections provided for remote voltage sense. Like new condition.
Product Details: Hewlett Packard fully front panel programmable or HP-IB remote controllable precision, "auto ranging" bench / lab, regulated, variable DC power supply with digital volt and amp metering. Front panel programmable control knob for voltage and current adjustments or is HP-IB remote controllable. Digital LCD display provides accurate readings of both voltage and current and other parameters. The output connections are heavy duty binding posts, and standard "barrier strip" type wiring connections. In addition, connections are provided for remote voltage sense and HP-IB remote programming capabilities.
Product Details: Kepco precision, bench / lab, regulated variable DC power supply with analog volt / amp metering. Variable "ten turn" control knobs for precise voltage and current adjustments. The DC supply provides constant voltage and / or constant current. The dual range analog meters provide accurate readings of both voltage and current. The output connections are front and rear panel "5-way" binding posts, rear panel "barrier strip" type terminals. And rear panel connections are also provided for remote sense capabilities. In excellent condition. Includes a copy of the instruction manual.
Product Details: Kepco precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable "ten turn" control knobs for precise voltage and current adjustments. The analog meters provide accurate readings of both voltage and current. The output connections are rear panel "barrier strip" type terminals. Rear panel connections are also provided for remote sense and programming capabilities. Includes copy of the instruction manual.
Product Details: EMI Lambda Brand (Electronic Measurements Inc.) power supply. Front panel or IEEE-488 / HP-IB programmable / GP-IB remote interface, precision, bench / lab, regulated, variable dc power supply with digital volt / amp metering. Precision "ten turn" variable control knob for precise voltage adjustment and single turn control for current adjustments. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars". Rear panel connections are provided with remote sense and voltage programming / tracking capabilities. Includes copy of the operation manual.
Product Details: Sorensen precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. In addition, rear panel connections provide: voltage output, remote sense and voltage programming / tracking capabilities. Includes complete with copy of the operation manual.
Product Details: Lambda Electronics Measurements precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knob for voltage adjustment, and a control knob for current adjustment. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current threaded studs, with additional connections provided for remote voltage sense.
Product Details: EMI Lambda brand (Electronic Measurements Inc.) precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Precision "ten turn" variable control knob for precise voltage adjustment and single turn control for current adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", also, rear panel connections are provided with remote sense and voltage programming / tracking and monitoring capabilities. Includes copy of the operation manual.
Product Details: Lambda precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Variable course and fine control knobs for precise voltage adjustment. Single turn current control adjustment. The digital meter provides accurate readings of both voltage and current. The output connections are high current threaded studs. In addition, other rear panel connections provide remote sense and voltage programming / tracking capabilities.
Product Details: Hewlett Packard precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The analog meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel connections provide remote sense and voltage programming/tracking capabilities.
Product Details: Sorensen precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel connections provide voltage output, remote sense and voltage programming / tracking capabilities. Includes copies of installation and service manual.
Product Details: Sorensen variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and separate current adjustment knob. Analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts.
Product Details: Power Ten precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current. The output connections are rear panel high current "buss bars" with additional connections provided for remote voltage sense and programming. Includes copy of the operation and service manual.
Product Details: EMI Lambda brand (Electronic Measurements Inc.) power supply. Front panel or HP-IB programmable / GP-IB remote interface, precision, bench / lab, regulated, variable dc power supply with digital volt / amp metering. "ten turn" variable control knobs for precise voltage and current adjustments. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars". Rear panel connections are provided with remote sense and voltage programming / tracking capabilities.
Product Details: EMI Lambda brand, (Electronic Measurements Inc.) precision, bench / lab, regulated, variable dc power supply with digital volt / amp metering. Input power. Precision "ten turn" variable control knob for precise voltage adjustment and single turn control for current adjustments. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", also, rear panel connections are provided with remote sense and voltage programming / tracking capabilities. Includes copy of the operation manual.
Product Details: Lambda precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" controls for voltage and current adjustment with slot adjust locking pots. The DC supply provides constant voltage and / or constant current. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current threaded studs, with additional connections provided for remote voltage sense.
Product Details: Hewlett Packard precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering, including remote programming option (022). Variable fine and coarse control knobs for voltage and current adjustments. The DC supply provides 0-40 volts @ 0-5 amps constant voltage and / or constant current. In addition this power supply includes the adjustable over-voltage "crowbar" protection option. The analog meters provide accurate readings of both voltage and current and the front panel "test output" connections are standard "banana" type 5-way binding posts. Also, rear panel high current connections are provided with remote sense and voltage programming / tracking capabilities.
Product Details: Hewlett Packard precision regulated power supply. Variable fine and coarse control knobs for voltage and current adjustments. Constant voltage and / or constant current. The analog meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel connections provide remote sense and voltage programming / tracking capabilities.
Product Details: Kikusui precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Precision "ten-turn" variable control knob for voltage adjustment and a control knob for current adjustments. Includes the adjustable over-voltage protection option. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Also, rear panel connections are provided with remote sense and voltage programming / tracking capabilities. Includes copy of the operation manual.
Product Details: Lambda fully front panel programmable precision, bench / lab, regulated, variable DC power supply with analog volt and amp metering. The analog meters provide accurate readings of both voltage and current. The output connections are heavy duty "buss bars", and standard "barrier strip" type wiring connections. Connections are provided for remote voltage sense.
Product Details: Power Designs TW-4005 is a dual 0 - 40v DC at 400 mADC solid state power supply. It features constant voltage and current modes with a separate panel meter for each output. Each panel meter can monitor voltage or current via switch selection. A front panel pushbutton aids quick adjustment of constant current points.
Product Details: Sorensen precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel connections provide voltage output, remote sense and voltage programming / tracking capabilities. Includes copies of installation and service manual.
Product Details: Systron Donner variable DC power supply with analog volt / amp metering. Precision "ten-turn" variable control knobs for voltage and current adjustments. The analog meters provide accurate readings of both voltage and current and the front panel output connections are standard "banana" type 5-way binding posts. In addition rear panel high current connections are provided with remote sense capabilities and remote current and voltage programming capabilities. Includes the automatic over-voltage "crowbar" protection option.
Product Details: Hewlett Packard precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel voltage output connections are provided along with remote sense and voltage programming / tracking capabilities.
Product Details: Hewlett Packard precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. The analog meters provides accurate readings of both voltage and current and the output connections are a rear panel high current barrier strip and front panel standard "banana" type 5-way binding posts (up to 5 amps). In addition, rear panel connections are provided for remote sense and voltage programming / tracking capabilities.
Product Details: Kepco precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable "ten turn" control knobs for precise voltage and current adjustments. This power supply includes an adjustable over-voltage "crowbar" protection feature. The analog meters provide accurate readings of both voltage and current. The output connections are standard "banana" type 5-way binding posts, in addition, rear panel connections provide DC out, remote sense, voltage, and current programming connections. Includes copy of the instruction manual.
Primary Single Phase: 104v AC @ 22 amps, 115v AC @ 20 amps, 208v AC @ 11 amps, 230v AC @ 10 amps
Product Details: Power Designs "auto ranging" precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable control knobs and switches for voltage and current adjustments. The dual range analog meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. In addition, rear panel connections are provided for remote sense and voltage programming/ tracking capabilities.Provides the following output voltages and amps:
Product Details: Power Ten (division of Elgar Corporation) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. In addition, this power supply includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming. This is truly a laboratory grade power supply with hum and noise specifications measured in millivolts and supply regulation accurate to ± 0.01%.
Product Details: Power Ten (division of Elgar Corporation) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming.
Product Details: Power Ten (division of Elgar Corporation) precision, bench / lab, regulated, variable dc power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both nel high current "buss bars", with additional connections provided for remote voltage sense and programming. Includes copy of the operation manual.
Product Details: Power Ten (division of Elgar Corporation) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. Provides constant voltage and / or constant current. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming. Includes copy of the operation manual.
Product Details: Sorensen precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. "ten-turn" variable control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are high-current "buss-bars". Also, rear panel connections are provided with remote sense and voltage / current programming / tracking capabilities.
Product Details: Sorensen precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. Provides constant voltage and / or constant current. Includes a fully adjustable over-voltage protection feature. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. In addition, rear panel connections provide: voltage output, remote sense and voltage programming / tracking capabilities.
Product Details: Sorensen regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. In addition, rear panel connections provide: voltage output, remote sense and voltage programming / tracking capabilities.
Product Details: Sorensen regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard "barrier strip" type rear panel connections that provide: voltage output, remote sense and voltage programming / tracking capabilities. Complete with manual.
Product Details: Power Ten (division of Elgar Corporation) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. Provides constant voltage and / or constant current. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming. Includes copy of the operation manual.
Product Details: Power Designs precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage adjustment, and a single knob for current adjustments. The analog meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. In addition, rear panel connections provide remote sense and voltage programming/tracking capabilities. Excellent condition.
Product Details: Lambda precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knob for voltage adjustment, and a control knob for current adjustment. Digital meter provides precision readings of both voltage and current. The output connections are standard "banana" type 5-way binding posts. Also, rear panel connections provide remote sense and voltage programming/tracking capabilities. This is truly a laboratory grade, dc power supply with hum and noise specifications measured in microvolts and supply regulation accurate to ±0.005%.
Product Details: Kepco precision, bench / lab, regulated, variable bipolar DC power supply / amplifier with analog volt / amp metering. In Kepco's BOP, the voltage and current outputs can be controlled smoothly and linearly through the entire rated plus and minus ranges, passing smoothly through zero with no polarity switching. BOP are high speed power operational amplifiers that can be used to provide dynamically agile voltage for test and simulation. BOP, while fully rated power supplies, are also high-powered operational amplifiers with full 4-quadrant, bipolar operation. Their output is capable of both sustained dc and the replication of arbitrary ac waveforms. They are not general purpose power supplies. By the nature of the bipolar high speed design, they do not have any energy-storage noise discriminating output capacitors. To realize the full high speed potential of BOP, the load characteristics should be mainly resistive. If the load is capacitive, (>0.1 microfarad), the BOPmust be slowed to avoid oscillation. This is accomplished in voltage mode by increasing the value of the feedback capacitance. Special terminals on the user port are available to slow the BOP for optimum current-mode stability into inductive loading. Includes copy of operation manual.
Product Details: Lambda dual output precision, bench / lab, regulated, variable DC power supplies with digital volt / amp metering, each with a precision "ten turn" variable control knob for voltage and a knob for current adjustments. These two supply outputs can provide +/- supply rails or can be used independently and in series for greater voltage or in parallel for greater current output. The digital meters provide precision readings of both voltage and current. The output connections are standard "banana" type 5 way binding posts. Also, rear panel connections provide remote sense and voltage programming/tracking capabilities.
Product Details: Hewlett Packard / Harrison Labs dual range precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Coarse and fine control knobs for precision voltage adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. In addition, rear panel connections provide remote sense and voltage programming/tracking capabilities.
Product Details: Kepco precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Variable "ten turn" control knobs for precise voltage and current adjustments. Includes an adjustable over-voltage protection feature.the analog meters provide accurate readings of both voltage and current. The output connections are rear panel high current 5-way binding posts, and "barrier strip" type terminals. Rear panel connections are also provided for remote sense and voltage programming / tracking capabilities. Includes copy of the instruction manual.
Product Details: Hewlett Packard precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. Analog meters provides accurate readings of both voltage and current and the output connections are a rear panel high current "buss bars". In addition, rear panel connections are provided for remote sense and voltage programming/tracking capabilities.
Input: 230v AC, 1 ph mains but can be rewired for 208v AC operation
Product Details: Hewlett Packard precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. Includes the over-voltage protection option. The analog meters provides accurate readings of both voltage and current and the output connections are a rear panel high current "buss bars". In addition, rear panel connections are provided for remote sense and voltage programming/tracking capabilities.
Product Details: Power Ten (division of Elgar Corporation) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Optional RS-232 / RS-485 digital remote programming or front-panel control capability. This compact 20kw power supply is the ideal for designing, operating or repairing any electronic or electrical equipment that operates on voltages up to 40 volts and draws as much as 500 amps including aviation 28-volt DC buss hardware. Precision "ten turn" control knobs for voltage and current adjustments. Includes an adjustable over-voltage "crowbar" protection. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming. Very heavy.
Product Details: Kepco precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable "ten turn" control knobs for precise voltage and current adjustments. Includes an adjustable over-voltage "crowbar" protection feature. The analog meters provide accurate readings of both voltage and current. The output connections are rear panel high current 5-way binding posts, and "barrier strip" type terminals. Rear panel connections are also provided for remote sense and voltage programming / tracking capabilities. Includes copy of the instruction manual.
Product Details: Lambda mil-spec DC power supply. "Convection cooled" and does not utilize a cooling fan thereby greatly extending it's service life! New in the box.
Product Details: Hewlett Packard / Harrison Labs precision, bench / lab, regulated, variable DC power supply with analog volt metering. Variable fine and coarse control knobs for voltage and current adjustments. The dc supply provides constant voltage and / or constant current. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. In addition, rear panel connections provide remote sense and voltage programming/tracking capabilities.
Product Details: Lambda precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Variable 10 turn control knobs for voltage and current adjustments. Provides constant voltage and/or constant current. The analog meters provide precision readings of both voltage and current. The output connections are standard "banana" type 5 way binding posts, in addition, rear panel connections provide remote sense and voltage programming/tracking capabilities. This is truly a laboratory grade power supply with hum and noise specifications measured in micro volts and supply regulation accurate to ±0.005%. EACH POWER SUPPLY IS INSPECTED, TESTED, AND ANY REQUIRED ELECTRICAL OR MECHANICAL PARTS ARE REPAIRED OR REPLACED. Satisfaction guaranteed.
Product Details: Sorensen Inc. (division of Elgar Inc.) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Digital keypad entry for accurate voltage and current settings. The digital meters provide accurate readings of both voltage and current and the output connections utilize protected threaded-stud buss-bars. Other rear panel connections provide remote sense and voltage / current programing / tracking capabilities. Includes the a fully adjustable over-voltage "crowbar" protection feature. Includes copy of the operation manual.
Product Details: EMI Lambda brand, (Electronic Measurements Inc.) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" variable control knobs for precise voltage and current adjustments. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars".
Product Details: Sorensen Inc. (division of Elgar Inc.) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Digital keypad entry for accurate voltage and current settings. The digital meters provide accurate readings of both voltage and current and the output connections utilize protected threaded-stud buss-bars. Other rear panel connections provide remote sense and voltage / current programing / tracking capabilities. Includes the a fully adjustable over-voltage "crowbar" protection feature. Includes copy of the operation manual.
Product Details: Lambda brand (Electronic Measurements Inc.) precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering input power. Precision "ten turn" variable control knobs for precise voltage and current adjustments. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", also, rear panel connections are provided with remote sense and voltage programming / tracking capabilities. Includes copy of the operation manual.
Product Details: EMI Lambda (Electronic Measurements Inc.) front panel or HP-IB programmable / GP-IB remote interface, precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Input power. Precision "ten turn" variable control knobs for precise voltage and current adjustments. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", also, rear panel connections are provided with remote sense and voltage programming / tracking capabilities. Includes copy of the operation manual.
Product Details: Lambda precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The analog meters provides accurate readings of both voltage and current, rear panel mounted, high current output studs are provided, along with standard "barrier" strip connections for remote voltage sensing.
Product Details: Sorensen precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Digital keypad entry for accurate voltage and current settings. The dc supply provides constant voltage and / or constant current. The digital meters provide accurate readings of both voltage and current and the output connections utilize protected threaded-stud buss-bars. Rear panel connections provide remote sense and voltage / current programing / tracking capabilities. Includes the a fully adjustable over-voltage "crowbar" protection feature.
Product Details: Sorensen linear power supply. Fine and course voltage and current adjustments from front panel. Analog meters. 100% operational. Excellent condition!!
Product Details: Kepco digital lab power supply. Digital voltage and current readouts. Dual banana 5-way binding post. 10 turn voltage and current limiting front panel controls. Internal fan. Made in the USA.
Product Details: Lambda dual power supply. Each supply has coarse and fine voltage and current limit controls. 5-way binding post output. Analog meters. 100% tested and guaranteed.
Product Details: Sorensen precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Variable control knobs for voltage and current adjustments. Includes the optional, fully adjustable over-voltage "crowbar" protection feature. The digital meters provide accurate readings of both voltage and current and the output connections are standard buss bar. In addition, rear panel connections provide: voltage output, remote sense and voltage programming / tracking capabilities. Includes copy of the operation manual. Also included is the rare M51A option. It provides isolation for all programming, monitoring and digital I/O signals that are available through the standard rear panel analog interface connector (DB25). All connections are isolated and optically coupled from the power supply output. Units are in excellent condition and are guaranteed 60 days. This analog control option is in addition to the standard rear controls available on all DLM supplies.
Product Details: A beast of a linear power supply and is superior to switch mode supplies in many cases. 0.1% line and load regulation. Digital readouts and front panel voltage and current control. Linear supplies are best suited for sensitive analog circuitry due to fast transit response time and low noise output. Perfect for studio audio equipment and low noise amps. Sorensen led the market in linear powers supply design. Built like a tank for problem free operation. This beauty was load tested and is guaranteed 100% operational. 60 day warranty.
Input: 432 - 528v AC (440v AC nominal), 25 amp / ph, 3 phase, 60 Hz
Precision Bench/Lab Variable DC Power Supply 0 - 100v DC @ 0 - 1 amp
Kepco
$325.00
-
Precision Bench/Lab Variable DC Power Supply 0 - 100v DC @ 0 - 1 amp
Part Number: PS ATE100-1M
Product Details: Kepco Precision bench/lab variable DC Power Supply. 0-100v @ 0-1 amp. Analog volt/lamp metering with variable 10 turn control knobs for precise voltage & current adjustments. Rear barrier strip allows remote sense & voltage programming/tracking.
Precision Bench/Lab Variable DC Power Supply 0 - 55v @ 0 - 2 amps
Kepco
$325.00
-
Precision Bench/Lab Variable DC Power Supply 0 - 55v @ 0 - 2 amps
Part Number: PS JQE55-2M
Product Details: Kepco Precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. 0-55v @ 0-2 amps. Variable "ten turn" control knobs for precise voltage and current adjustments. Rear barrier strip for remote sense & voltage programming/tracking.
Product Details: Hewlett Packard auto ranging ultra-precision bench / lab, regulated, variable DC power supply / calibrator with precision thumb wheel voltage selection and analog volt / amp metering. This is truly a laboratory grade power supply with hum and noise specifications measured in micro volts and supply regulation accurate to ±0.0001%.Output: 0 - 20 volts @ 0 - 2 ampsOutput: 20 - 40 volts @ 0 - 1 ampDimensions: 13" x 8" x 6.5"HOriginally sold for $3,990. Our price¦
GE Global Platform Line High Efficiency Power Supply
GE
$1200.00
$1075.00 (+6)
GE Global Platform Line High Efficiency Power Supply
Part Number: PS GP100H3M54TEZ
Product Details: GE Global Platform Line High Efficiency Power Supply. Input is 3 Phase Delta (Frame Ground) 320 to 530VAC @ 15Amps max. (Typical: 380/480 VAC @ 12A) Output is 42-58VDC @ 6,000 Watts (Typical: 48-52VDC @ 6KW) with 5VDC @ 10 Watt Auxiliary. Applications for 48VDC distributed power, Routers, VOIP, Telecom Switches, File Servers, Enterprise Networks, SAN/NAS/iSCSI or Semiconductor Manufacturing. Efficiency 96.5 typical. Constant Programmable Power from 42 to 58VDC, PMBus compliant, dual I²C serial bus or GE Galaxy-based (PC/RS485) protocol; Redundant parallel operation with active load sharing (see (PS) J2014001L601 Power Shelf for dual rack mount operation).Input: 3 380/480vAC @ 15APrimary Output: 48/52/54vDC @ 6000W (115A)Auxiliary Outputs: 5vDC @ 10WDimensions: 8"W x 1-5/8"H x 17-1/4"DFactory NEW stock Original priced $2,600 to $4,360. Our price...
GE Global Platform Line Power Shelf for GP100 Rectifiers
-
$395.00
$330.00 (+3)
GE Global Platform Line Power Shelf for GP100 Rectifiers
Part Number: PS J2014001L601
Product Details: GE Global Platform Line High Efficiency Power Supply Power Shelf dual bay. Used for housing two (PS) GP100H3M54TEZ for redundancy and load sharing. 1U high x 19" standard rack mount. Factory NEW stock. Includes mating connectors for backplane connections.
Product Details: Power Designs triple output precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. One of the three outputs provides a single 0 - 6v @ 0 - 5 amps output with constant voltage and / or constant current modes and adjustable over voltage protection. The other dual outputs provide, 0 - 32v @ 0 - 1 amp. These two supply outputs can track each other providing ± supply rails or can be used independently and in series for greater voltage or in parallel for greater current output. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts.Single Output: 0 - 6v @ 0 - 5 ampsDual Outputs: 0 - 32v @ 0 - 1 ampDimensions: 7-3/4" x 9" x 13-1/2"HOriginally sold for $1,950. Our price...
Product Details: Power Designs triple output precision, bench / lab, regulated, variable DC power supplies with analog volt / amp metering. one of the three outputs provides a single 0 - 6v @ 0 - 5 amps or 6 - 15v @ 0 - 2.5 amps output with constant voltage and / or constant current modes and adjustable over voltage "crowbar" protection. The other dual outputs provide, 0 - 32v @ 0 - 1 amp with OVP. these two supply outputs can track each other providing ±supply rails or can be used independently and in series for greater voltage output. each output includes an adjustable over voltage "crowbar" protection (ovp). the analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. rear panel connections are provided for remote sense and voltage programming / tracking capabilities.Single Outputs: 0 - 6v @ 0 - 5 amps or 6 - 15v @ 0 - 2.5 ampsDual Outputs: 0 - 32v @ 0 - 1 ampDimensions: 7-3/4" x 8-1/2"H x 14-1/2"Originally sold for $1,890. Our price...
Product Details: Kikusui precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable control knobs for voltage and current adjustments. The DC supply provides, 0 - 32v @ 0 - 1.2 amps, constant voltage and / or constant current. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts.Output: 0 - 32v @ 0 - 1.2 ampsDimensions: 7" x 4" x 6"H
Product Details: Lambda precision plating / bench / lab regulated, variable DC power supply with digital volt / amp metering. Single knob for all adjustments including voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option.Output: 0 - 36v @ 0 - 6 ampsDimensions: 15" x 3" x 5"HOriginally sold for $1,250. Our price...
Product Details: Harrison power supply. Analog meters. Screw terminal output on rear. Voltage and current adjustment from front panel.Input: 120v ACOutput: 0 - 36v DC @ 0 - 5 ampsDimensions: 19" rack width x 18"D x 3.5"H
Product Details: NJE older linear power supply operates just fine. Voltage control from front panel. Analog meters.Output: 0 - 36v DC @ 0 - 2 ampsDimensions: 16" x 8" x 4.5"H
Product Details: High quality superior design Lambda supply. The ESS is a high power Constant Voltage, Constant Current Programmable DC power supply. It features a pulse-by-pulse current limit which provides excellent performance in demanding high current applications such as RF Amplifiers, DC Motors and Magnetic Coils. The many standard features make it an excellent choice for both OEM and laboratory applications. Front panel voltage and current adjustment along with large LCD digital readouts. High current buss bar output. Fully reconditioned. Tested at full load and guaranteed 60 days.Input: 432 - 528v AC (460v nominal) @ 16 amps, 57 - 63 Hz, 3 phase, 5 wire (with neutral and ground)Output: 0 - 40v DC @ 0 - 250 ampsDimensions: 22" deep x 19" wide x 8.75" high
Product Details: Lambda Model LQ-522, precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knob for voltage adjustment, and a control knob for current adjustment. Digital meter provides precision readings of both voltage and current. The output connections are standard "banana" type 5-way binding posts. Also, rear panel connections provide remote sense and voltage programming/tracking capabilities. This is truly a laboratory grade, dc power supply with hum and noise specifications measured in microvolts and supply regulation accurate to ±0.005%. EACH POWER SUPPLY IS INSPECTED, TESTED, AND ANY REQUIRED ELECTRICAL OR MECHANICAL PARTS ARE REPAIRED OR REPLACED. Satisfaction guaranteed.Output: 0 - 40v @ 0 - 1.8 ampsDimensions: 17" x 4" x 5.5"H
Product Details: Sorensen precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable fine and coarse control knobs for voltage and current adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel connections provide voltage output, remote sense and voltage programming / tracking capabilities. Includes copy of the operation and service manual. The included service manual provides instructions to re-configure the unit for 120v AC operation!Input: 180 - 230v AC, 50/60 HZ, 1 phaseOutput: 0 - 40v @ 0 - 25 ampsDimensions: 19" rack width x 21"D x 5.25"HWeight: 92 lbs
Product Details: Sorensen precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable course and fine control knobs for precise voltage and current adjustments. The dc supply provides constant voltage and / or constant current. Includes the adjustable over-voltage "crowbar" protection option. The analog meters provide accurate readings of both voltage and current and the output connections are on a high current "barrier strip". Rear panel connections provide remote sense and voltage programming / tracking capabilities. Includes copy of installation and service manual.Input: 197 - 230v AC, 50/60 Hz, 1 phOutput: 0 - 40v @ 0 - 70 ampsDimensions: 19" rack width x 21"D x 7"H
Product Details: Lambda precision, bench / lab, regulated, variable DC power supply with dual volt / amp metering. Variable fine and coarse control knobs for voltage and a knob for current adjustments.Output: 0 - 40v @ 0-1.3 ampsDimensions: 16" x 4" x 5.5"H
Product Details: Hewlett Packard dual output, dual range precision, bench / lab, regulated variable DC power supply with analog volt / amp metering. The two power supply outputs will provide ±supply rails or can be used independently and in series for greater voltage or in parallel for greater current output. This power supply provides 2 independent 0 - 40v @ 0 - 0.3 amps or 0 - 20v @ 0 - 0.6 amps outputs, each with variable fine and coarse control knobs for voltage adjustments. The analog meters provide accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel connections are also provided for remote sense and voltage programming / tracking capabilities.Output: 0 - 40v @ 0 - 0.3a or 0 - 20v @ 0 - 0.6aDimensions: 14" x 8.5" x 4"HOriginally sold for $1,540. Our price...
Product Details: Power Designs dual output precision, bench / lab, regulated, variable DC power supplies with dual volt / amp metering. These two supply outputs can provide ±supply rails or can be used independently and in series for greater voltage or in parallel for greater current output. The analog meters provide accurate readings of both voltage and current. The output connections are standard "banana" type 5-way binding posts. Rear panel connections provide remote sense and voltage programming / tracking capabilities.Dual Outputs: 0 - 50 volts @ 0 - 500 mADimensions: 7-3/4" x 8-1/2" x 14-1/2"H
Product Details: Hewlett Packard precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Variable "coarse and fine" control knobs for voltage and current adjustments. Output connections are standard "banana" type 5-way binding posts. Rear panel connections provide remote sense and voltage programming / tracking capabilities.Output: 0 - 40v @ 0 - 0.75 ampsDimensions: 14" x 8.5" x 4"H
Product Details: Lambda precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. Precision "ten turn" control knob for voltage adjustment and a control knob for current adjustment. The meter provides precision readings of both voltage and current. The output connections are standard "banana" type 5-way binding posts. Rear panel connections provide remote sense and voltage programming / tracking capabilities.Output: 0 - 40v @ 0 - 3 ampsDimensions: 16" x 8.5" x 5"H
Product Details: Power Ten (division of Elgar Corporation) precision, bench / lab, regulated, variable DC 20KW power supply with digital volt / amp metering. Ideal piece of professional test gear for your bench to check out and evaluate any electronic or electrical equipment that operates on voltages up to 60 volts and draws as much as 330 amps. Precision "ten turn" control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings. High current "buss bars", with additional connections provided for remote voltage sense and programming. Each unit is professionally reconditioned, is operating to original factory specifications and is guaranteed 60 days.Input: 200 - 240v AC , 3 ph, 47-63 HzOutput: 0 - 60v @ 0 - 330 ampsDimensions: 26" x 19" x 10.5"HOriginally sold for more than $15,000. Our price...
Product Details: Kepco precision, bench / lab, regulated variable DC power supply with analog volt / amp metering with variable "ten turn" control knobs for precise voltage and current adjustments. This power supply includes an adjustable over-voltage "crowbar" protection feature. The analog meters provide accurate readings of both voltage and current. The output connections are rear panel "barrier strip" type terminals. rear panel connections are also provided for remote sense and voltage programming / tracking capabilities.Output: 0 - 55v @ 0 - 1 ampDimensions: 18" x 4" x 5.5"H
Product Details: Power Designs "auto ranging" precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. This power supply provides an auto ranging, 0 - 6v and 0 - 60v @ 0 - 0.5 amps and 0 - 5 amps output with variable control knobs and switches for voltage and current adjustments. This power supply includes the adjustable over-voltage "output crowbar" protection option. The precision digital meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5 way binding posts. in addition, rear panel connections are provided for remote sense and voltage programming / tracking capabilities.Output: 0 - 60v @ 0 - 5 ampsDimensions: 12" x 8.5" x 5"HThis very compact, auto ranging power supply provides the following output voltages and amps:0 - 7v @ 0 - 5 amps7 - 15v @ 0 - 3 amps15 - 25v @ 0 - 2 amps25 - 60v @ 0 - 1 ampOriginally sold for $1,399. Our price...
Product Details: Kepco Precision bench/lab variable DC Power Supply. 0-100v @ 0-1 amp. Analog volt/lamp metering with variable 10 turn control knobs for precise voltage & current adjustments. Rear barrier strip allows remote sense & voltage programming/tracking.Input: 110v ACOutput: 0 - 100v DC @ 0 - 1 ampDimensions: 18" x 4" x 5"H
Product Details: Lambda precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. The digital meter provide precision readings of both voltage and current. The output connections are standard "banana" type 5-way binding posts, in addition, rear panel connections provide voltage output, remote sense and voltage programming / tracking capabilities. This is truly a laboratory grade power supply with hum and noise specifications measured in micro volts and supply regulation accurate to ±0.005%. EACH POWER SUPPLY IS INSPECTED, TESTED, AND ANY REQUIRED ELECTRICAL OR MECHANICAL PARTS ARE REPAIRED OR REPLACED. Satisfaction guaranteed.Output: 0 - 120v @ 0 - 0.5 ampsDimensions: 16.5" x 4"W x 5-1/2"Originally sold for $1,395. our price...
Product Details: Kepco precision bench / lab, regulated, variable DC power supply with analog volt / amp metering with variable "ten turn" control knobs for precise voltage and current adjustments. The DC supply provides, 0 - 100v @ 0 - 1 amp, constant voltage and / or constant current. The dual range analog meters provide accurate readings of both voltage and current. The output connections are front and rear panel 5-way binding posts, rear panel "barrier strip" type terminals. Rear panel connections are also provided for remote sense capabilities.Output: 0 - 100v @ 0 - 1 ampDimensions: 18" x 4" x 5.5"H
Product Details: Bio-Rad power supply. Digital read out switchable Amps/volts.Input: standard 120v / 60 HzOutput: 0-250v, 2.5 ampsDimensions: 5"W x 11" deep x 8-3/4"H
Login