Gear Motors

Product Details:
ECM gear motor. 120v, 60 Hz, 6 RPM. 6 tapped 10-32 holes. Clockwise rotation looking at shaft. Pellet stove replacement auger motor. Works on Bixby. Our motor is twice the torque of any other 6 RPM pellet motor on the market! 1/2" x 1/2" shaft. 4-5/8"H x 2-3/4"W x 5-1/8" deep. 5.2 lbs. U.S. made. Includes fan blade.

Product Details:
Leeson AC gear motor. Thermal protected. 230v / 480v @ 0.7 amps / 0.35 amps, 3 phase, 0.167 HP, 60 Hz, continuous duty, 40 amb, 20 in. lb. torq, 480 rpm, 7:1 ratio. 10" overall length. 4" x 4-3/4" mounting face. 5/8"D x 1-1/2"L round shaft with key. Alt. P/N: CM38T35NZ2A.

Product Details:
Vickers aircraft motor. 400 Hz, 3 phase. Angle drive gear motor. 115/200v, 2 amps, HP: 0.06, 34.5 rpm. 2-1/4"D x 6-1/2"L, 0.506" inside diameter shaft housing. Also Weber P/N: 839645-401.

Product Details:
Precision Timer Co., Connecticut, USA sequential timer. 6 minute timer. 15 amp switch rating. 1/2 rpm, 120v. 2 spade terminals, 60 Hz. NOS.

Product Details:
Mettler-Toledo gear motor. 24 vdc. 4:1 ratio. 3000 rpm max. 2-1/8"D x 4"L body, 8-3/4" overall length. 0.591"D x 1.18"L round shaft, keyed, threaded center bore. Alt. P/N: 24124602.

Product Details:
Robbins & Myers gear motor. 115v AC, 50/60 Hz, 0.31 amps. CCW rotation, 1.5 rpm. 3-1/8" x 3-1/8" x 2-7/8" behind panel depth. 7.94mm (0.313") x 17mm L shaft with flat. 2.39" x 2.39" mounting centers.

Product Details:
Sesame Motor Corp.1/2 H.P. gear motor. 130v DC at 4 amp, 30.33 rpm with gear ratio of 60 to 1. Reversible rotation. 3/4" keyed shaft, 1-1/2" long. Motor 9-3/4"L x 6"W. 5" x 2-1/2" mounting holes, 18" leads. Removable brushes. Alt P/N: G12H-400W.

Product Details:
Synchron gear timer motor. 110v AC @ 60 Hz, 3 watts. 1 RPH. 10 tooth gear. 1.93"D x 1.30"H. 1.88" mounting centers. Circa 1969.

Product Details:
Synchron Model 630 synchronous motor. 10 rpm, 110v @ 60 Hz. 1.48"D x 0.83"H body. 0.120"D x 1.14"L "D" shaft. 1.53" x 0.29" mounting centers. UL & CSA listed.

Product Details:
Pittman gear motor. 65.5 : 1 ratio. 26v DC. 1-15/16"D x 3-1/2"L body. 1/4" x 5/8"L shaft. 1-1/2" mounting centers on head taps.

Product Details:
Synchron motor. 110v @ 60 Hz, 5 watts. 40 rpm. 0.54"L shaft with 5-40 male thread. 2.0" x 0.75" mounting centers. 1.93"D x 1.35"H.

Product Details:
Barber-Coleman gear motor / pump assembly. 12v DC, reversible. 2-7/8"L x 2"D. 1/4" x 3/8"L output shaft.

Product Details:
Gear motor. 115v AC. 180 rpm.

Product Details:
Merkle-Korff gear motor. 12v DC, 3-1/2 rpm, 27 mA no load. 4-1/2" overall length + shaft x 1-15/16"D. 1/4" x 11/16"L "D" shaft. 1-1/2" mounting centers. 10-32 taps.

Product Details:
Colman gear motor. 12v DC, 17 rpm. 1-3/8"D x 2-7/8"L + shaft. 0.288"D x 0.73"L "D" shaft.

Product Details:
Mounted in a 4-1/4" x 3-1/2" x 5"H aluminum frame with mounting tabs. Motor measures: 2-5/8" x 3-1/4" x 4". 1/4"D shaft.

Product Details:
Colman Products gear motor. 12v DC, 20 rpm. 1-15/16"D x 3-1/8" overall length + shaft. 1/4"D x 11/16"L shaft. 1.5" mounting center, 10-32 taps.

Product Details:
Merkle-Korff gear motor. 12v DC, 38 rpm. 1-15/16"D x 4-1/2" overall length + shaft. 1/4" x 11/16"L "D" shaft. 1-1/2" mounting centers, 10-32 taps.

Product Details:
Barber Colman gear motor. 24v DC, 20 rpm. 2-11/16" x 3" gear box. 4"L body + shaft. 0.313"D x 0.875" shaft. 2-3/8" x 2-1/2" mounting centers.

Product Details:
Merkle-Korff gear motor. 24v DC @ 0.23 amps full load. 1.92 watts. 4 internal gear steps. 119.53 rpm, 21.70 oz / in torque. 1.38"D x 2.68"L body. 0.186"D shaft, 0.734"L. 0.970" x 0.800" mounting centers on 3 - 6/32 threads.

Product Details:
Barber-Coleman gear motor. 27v DC, 0.35 amps, 9.2 rpm, 10 lb / in torque. Continuous duty. 1-3/8"D x 3-1/4"L. 0.183" square shaft. 0.848" mounting center, front head threads. NSN: 6105-881-7353.

Product Details:
Frederick Motor Co. gear motor. 120v, 60 Hz, 20 rpm. 1.84"D x 0.89"H. 1/8" x 0.35"L shaft. 1.87" mounting centers.

Product Details:
TRW Globe gear motor. 24v DC, 100 oz. in. torque. Speed: 22 rpm nominal. Gear ratio: 240:1, 18 rpm. 1.42"D x 2.8"L body. 0.187"D x 0.41"L shaft. 0.904" - 0.778" mounting centers on 3 - #4 threads.

Product Details:
Ametek / Pittman gear motor. Max 50 rpm @ 24vDC. 127.7:1 ratio. Minimum speed @ 4vDC. 25 watts. 2" x 2" mounting plate. 1.62" mounting centers. 1/4" (6.3mm) x 0.66"L shaft. 3.8" long.

Product Details:
Cramer synchronous gear motor. 1/5 RPM / 115v AC / 60 Hz / 3w. 2-1/16" c-c mounting positions and right angle from shaft. 1/8"d x 1"L shaft. Used-removed.

Product Details:
Precision timer. 24 hour per revolution. Two SPDT 15 amp switches. 24vAC, 60 hz. Cams activated switches @ 12 hour point. 12 hour on-12 hour off. 1/4" shaft output. 3-1/8" x 2-1/4" x 2-1/4"H.

Product Details:
Colman Motor Products Inc DC gear motor. 12 tooth gear.

Motor Specifications:
• Rated for: 24v DC, 0.5 amp, 32 rpm
• Stall torque: 150 oz.-in.
• Body dimensions: 2"D x 3-1/4"L, 4" overall length
• Shaft dimensions 1/4" "D" shaft

Product Details:
Gear motor assembly. 24 vac, reversible. This assembly has been removed from factory new, never used equipment. Includes sub-chassis, 1k - 10 turn positioning pot, capacitor and resistor. Many uses such as advancing rotary switches, variable inductor drives, etc. 3-1/2" x 4-1/4" x 4"H.

Product Details:
24 vac (50/60 Hz) operated motor is used in the SRS Antenna Couplers to tune inductors, switches and vacuum caps. Healthy torque manages any component in their line. 70 rpm at 24 vac 60 Hz, with full rated load. Lower voltage to lower speed also decreases torque. Double 1/4" shaft exits each side of gearbox. Mounts by threaded post sockets on front spaced in a 1-9/16" square. Max dimensions 3-3/4" high x 2-7/8" wide x 3-1/2" deep from mounting posts to electrical terminals on back.

Suitable for almost any remote tuning application of a vacuum cap, rotary inductor or ceramic switch.

MK Model QFS3420R. Includes starting cap and wiring instructions. Limited quantity!

Product Details:
TRW Globe gear motor # 5A1951. 26.5 vdc. 2.7 rotation turns counter and stop. DC inputs include RFI filters. 2-1/2" diameter, 140 tooth gear. NSN: 6105-00-860-6067.

Product Details:
General Traffic Equipment Corp. dial motor replacement kit. 110v, 60 Hz. 2 rpm motor. This assembly has a Synchron JC248RC-5-6. Includes Aromat HC1-AC115V SPDT relay. 3/16" (0.187") shaft, includes 18 tooth gear.

Product Details:
Barber-Coleman motorized actuator, damper motor. 240v, 60 Hz, 0.22 amps, 28 watts. 1/2" spline shaft. 5-1/4" x 5-1/2" x 7"H. New, unused. Harris P/N: 442-0044-000.

Product Details:
Gear motor mounting plate. Aluminum. 2-1/2" square.

Product Details:
Hurst motor. 50 cycle, 2/5 rpm, 5 watt, 115 vac. 3 wires. 2-1/2" diameter x 2" deep body. 0.186"D x 2-1/2"L round shaft. 3 mounting holes, 2-3/8" c-c. Reversible. Includes capacitor.

Product Details:
Right angle drive has 24 rpm output. 115 vac (60 Hz) 1/6 hp, 2.8 amps, 1 phase, 1725 rpm Master Electric motor drives this navy antenna array rotator. Output shaft is center, vertical. Also incorporates manual adjust wheel (left). Tripod mounting. 230 pound crate weight. New, unused. Just a few on hand.

Product Details:
Invensys Dura Drive spring return actuator. Two position actuator 35 / IN-LB (4 Nm). 120 vac, 6.4 va, 3.8 watts. Adjustable stop up to 95º rotation. Remove power at any point in rotation and actuator returns to start. V-clamp accommodates shaft up to 5/8" diameter. Measures 2-1/2" x 4" x 7" high. Great for projects like HVAC dampers, visual display animation and repeat high torque operations that require a 90º rotation or less. Normally sells for over $155. Our price...

Product Details:
Bodine gear motor, (801VA079). 115 vac, 60 Hz, 8.5 watts, 300 rpm. Torque = 1.7 in. oz. Includes capacitor. 1/4" x 1/2"L shaft. 2-1/4" x 2-1/4" x 2-1/2"L. Harris P/N: 436-0081-000.

Product Details:
Cramer synchronous gear motor. 24 vac, 2.7w, 30 rpm. 1-7/8" diameter body, 1-7/8" center to center mounting ears. 3/16" flatted shaft, 3/8"L.

Product Details:
Motor with capacitor. Capacitor: VC - 1835, 115v AC. 3 x 3 ohms. Motor: 5" tall diameter. 4-3/8" shoulder to shoulder. Circa 1941. 5/16" shaft has 18 700th sprocket. Operating voltages unknown. Includes brake mechanism. 4-5/16" diameter.

Product Details:
Dayton gearmotor. 1/4 HP, 60 RPM, 200 in/ilbs torque. 115v, 60Hz, 3.9 amps. 29:1 ratio. Reversible. 3/4" x 1-1/2" shaft. New old stock.