RF Waveguide Assemblies
AN / TPS-1B
Rigid Waveguide Transmission Line
Rigid Waveguide Transmission Line
![]() |
![]() |
![]() |
(MWW) B415340
52" long x 1-1/2" diameter
transmission line has angle flange on one end and large female
socket at 45º angle on other. These are brand new
in foot lockers. Nomenclature marked B415340 and AN/ TPS-1B.
$100 each
Waveguide Assembly
4 @ 7.4 - 10.1 GHz / 5 @ 10.0 - 14.1 GHz
4 @ 7.4 - 10.1 GHz / 5 @ 10.0 - 14.1 GHz

(MWW) 107901
Waveguide assembly. Multiple connections (9) to single flange (special). Flange measures: 4-1/2" x 5". Nine connections: 4 @ 7.4 - 10.1 GHz, 5 @ 10.0 - 14.1 GHz. RF-160. NSN: 5985-00-757-8069. Airtron P/N: 107901.
$250 each
Rigid Waveguide
Assembly
2.6 - 3.95 GHz
2.6 - 3.95 GHz

(MWW) 2ZA1300.85
WR-284 flanges (5" diameter with 2.84" x 1.34" opening).
43" center to center long dimension, 12-1/2" c-c on
long turn.
$395 each
Rotating Feed Arm Assembly
X - Band
X - Band

(MWW) 2Z4885-91
Bendix
Radio made this silver
jewel for the USN in 1945. 9/16" x 1-15/16" mouth opening in close-up. The
long side is 15-1/2" from end back to the opening at the center
pivot. We have quite a stash
new in the boxes. Drawing #: AN92862-1.
$25 each
Rigid Waveguide
12.4 - 18 GHz
12.4 - 18 GHz

(MWW)
R10233
WR-62 flanges, air fitting, waveguide w/ twist, turns.
$125 each
Rigid Waveguide
26.5 - 40 GHz
26.5 - 40 GHz

(MWW)
2350002476
WR-28 flanges, 180º turn,
1-1/2" wide x 1-1/4" deep.
$45 each
Parabolic Feed Assembly

(MWW) FAASY
24" feed assembly with what looks like 7/8" EIA
flanges. Silver. Used.
$25 each
Rigid Waveguide Assembly
5.85 - 8.2 GHz
5.85 - 8.2 GHz

(MWW) SO-6
WR-137 waveguide (0.622" x
1.372" inside) in double
90 configuration. Oversize rectangular flange ( 2.25" x
3") with 10 holes on one end, round 2-5/8" diameter
flange opposite without holes, only lineup bumps. Large rectangular
flange above round flange (3-1/4" x 4") has no holes.
12" center to center on flanges. Removable screw on cap
top / center has 1/4" wide slot window under cap.
$45 each
Waveguide Hanger Clamp

(MWH) 82478-2HJ9
Andrew hanger clamp, 5-1/8" inside
diameter.
$25 each
Waveguide Hanger Clamp

(MWH) 19007A-166
Andrew TOWER hanger kit
for supporting 1-5/8" rigid
waveguide on tower.
$65 each