3 Volt to 12 Volt Power Supplies

Benchtop Electronic Load
0 - 60v DC @ 0 - 60 amps / 750 watts
(EQP) OL-750-R
Omega benchtop electronic load. Input: 88 - 135v AC @ 50/60 Hz. Output: 0 - 60v DC @ 0 - 60 amps, 750 watts. 17" x 7" x 5.5"H. Used. Tested - guaranteed. Every bench should have one of these test loads for maintaining low voltage power supplies.
$350 each - $325 (3+)
Acopian Regulated Power Supply
5v @ 6 amps
(PS) VA5MT600
Acopian model VA5MT600, (same as A5MT600 , "V" prefix = over-voltage option), 5v (adjustable +/- 0.5v) @ 6 amps, precision, bench / lab, regulated DC power supply MPS. The Acopian A5MT600 VA5MT600 provides a single, 5v @ 6 amps output with variable control pot for +/- 0.5v adjustment. The DC supply provides 5v @ 6 amps, constant voltage and current limit. The output connections are a rear panel high current barrier strip. In addition, this power supply is "convection cooled" and does not utilize a cooling fan thereby greatly extending it's service life! This is truly a laboratory grade power supply with hum and noise specifications measured in micro volts and supply regulation accurate to 0.01%. Like new condition.
  • Output: 5v @ 6 amps
  • Dimensions: 3.5" x 5" x 7"H
Originally sold for $310. Our price...
$65 each
ACDC Quad Fixed Voltage Supply
5v DC @ 25 amps, 12v DC @ 16 amps,
-12v DC @ 6.8 amps, -5v DC @ 6 amps
(PS) RPS-2-2-1-3-115-2-372
ACDC Quad fixed voltage supply. Terminal strip output with sense.
  • Input: 115v AC
  • Outputs: 5v DC @ 25 amps, 12v DC @ 16 amps, -12v DC @ 6.8 amps, -5v DC @ 6 amps
  • Dimensions: 22"D x 19"W x 5.25"H
$150 each
Linear Power Supply
5v DC @ 50 amps ±5%
(PS) LYS-P-5
Lambda linear power supply. New!
  • Input: 105 - 132v @ 47 - 63 Hz
  • Outputs: 5v DC 50 amps ±5%
  • Dimensions: 4-1/2" x 4-3/4" x 10"L
$95 each
Acopian Regulated Power Supply
5v DC (±0.5v) @ 9 amps
(PS) A5MT900
Acopian regulated power supply. Like new!
  • Output: 5v DC (±0.5v) @ 9 amps
  • Dimensions: 3-1/2" x 5-1/8" x 10"L
$95 each
Variable DC Power Supply
4 - 5.5 volts @ 0 - 8 amps
(PS) HP6384A
Hewlett Packard regulated, variable DC power supply with analog volt / amp metering. Variable course and fine control knobs for voltage and current adjustments. Precision, plating / bench / lab. Model 6384A.
  • Output: 4 - 5.5 volts @ 0 - 8 amps
  • Dimensions: 14" x 8.5" x 4"H
Originally priced at $2,150.00. Our price…
$179 each
Regulated Variable Power Supply
0 - 5.5v @ 0 - 150 amps
(PS) EMS5.5-150-1-D
EMI Lambda brand (Electronic Measurements Inc.) precision, electro plating / bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering. Precision "ten turn" control knob for voltage adjustment, and a control knob for current adjustment. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming.
  • Output: 0 - 5.5v @ 0 - 150 amps
  • Dimensions: 20" x 19" x 1.75"H
*** SOLD OUT ***
Regulated Variable Power Supply
0 - 6v @ 0 - 60 amps
(PS) HP6551A
Hewlett Packard precision, plating / bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering. Two knobs for all adjustments including voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provides accurate readings of both voltage and current and the rear panel output connections are standard "buss bar" type, additional connections are provided with remote sense and voltage programming / tracking capabilities.
  • Output: 0 - 6v @ 0 - 60 amps
  • Dimensions: 20" x 17" x 6"H
Originally sold for $1,450. Our price...
$449 each
HBS DC Power Supply
0 - 6v DC @ 50 amps
(PS) M506
HBS DC power supply. Metered volts and amps. Our variacs are the highest quality, MADE IN THE USA! Not poorly made imported copies.
  • Input: 230v AC, 60 Hz, 2 amps, 1 phase
  • Output: 0 - 6v DC @ 50 amps
  • Dimensions: 10-1/2" x 21"L x 10-1/2"H
$350
Variable DC Power Supply
0 - 6v @ 0 - 1 amps & ± 0 - 18v @ 0 - 0.2 amps
(PS) HP6235A
Hewlett Packard triple output variable DC power supply with analog volt / amp metering. Dual outputs provide 0 - 18v @ 0 - 0.2 amps and can track each other providing ± supply rails with adjustable voltage offset or can be used independently and in series for greater voltage. Banana type 5-way binding posts. Used, but in excellent working condition. Includes operation and service manuals.
  • Output: 0 - 6v @ 0 - 1 amps
  • Output: ± 0 - 18v @ 0 - 0.2 amps
  • Dimensions: 6-3/16"W x 3-1/2"H x 8"L
$117 each
Variable DC Power Supply
0 - 6 volts @ 0 - 10 amps
(PS) ATE6-10M
Kepco precision, lab, regulated, variable DC power supply with analog volt / amp metering. Variable "ten turn" control knobs for precise voltage and current adjustments. The analog meters provides accurate readings of both voltage and current and the output connections are standard rear panel "barrier strip" connections. In addition, rear panel connections are provided for remote sense.
  • Output: 0 - 6 volts @ 0 - 10 amps
  • Dimensions: 18" x 4" x 5"H
$249 each
Variable DC Power Supply
0 - 7v DC @ 0 - 5 amps / Dual: 0 - 20v @ 0 - 1.5 amps
(PS) LPT-7202-FM
Lambda regulated variable DC power supply with analog volt / amp metering. Triple output, precision, bench / lab. One of the three outputs provides a single, 0 - 7v @ 0 - 5 amp output with constant voltage and / or constant current modes. The other dual outputs each provide 0 - 20v @ 0 - 1.5 amps. These two supply outputs can be interconnected on the rear barrier strip to track each other providing ± supply rails or can be used independently and in series for greater voltage or in parallel for greater current output. standard "banana" type 5-way binding posts. Includes copy of manual.
  • 1st Output: 0 - 7v @ 0 - 5 amp
  • Dual Outputs: 0 - 20v @ 0 - 1.5 amps
  • Dimensions: 11.5" x 12.5" x 5.5"H
$389 each
Variable DC Power Supply
0 - 7.5v @ 0 - 3 amps
(PS) HP6203B
Hewlett Packard power supply with analog volt / amp metering. Variable course and fine control knobs for voltage and current adjustments. The DC supply provides 0 - 7.5v @ 0 - 3 amps constant voltage and / or constant current. The analog meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel connections provide remote sense and voltage programming / tracking capabilities.
  • Output: 0 - 7.5v @ 0 - 3 amps
  • Dimensions: 14" x 8-1/2" x 4"H
$125 each
Regulated Variable Power Supply
0 - 7.5v @ 0 - 60 amps
(PS) LES-EE-01-OV
Lambda precision, bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering. Variable 10 turn control knobs for voltage and current adjustments. The digital meter provides accurate readings of both voltage and current. The output connections are high current threaded studs. In addition, other rear panel connections provide remote sense and voltage programming / tracking capabilities. Precision regulated dc lab supply that can be utilized for any application in plating, and electronic circuit design or repair.
  • Output: 0 - 7.5v @ 0 - 60 amps
  • Dimensions: 19" x 8.5" x 5"H
Originally sold for $2,150. Our price...
$489 each
Variable DC Power Supply
0 - 7.5v @ 0 - 5 amps
(PS) HP6281A
Hewlett Packard precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering, with variable course and fine control knobs for voltage and current adjustments. The analog meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel connections provide remote sense and voltage programming / tracking capabilities.
  • Output: 0 - 7.5v @ 0 - 5 amps
  • Dimensions: 16" x 8.5" x 4"H
Originally sold for $1,445. our price...
$229 each
Variable DC Power Supply
0 - 10v @ 0 - 5 amps
(PS) LQ520
Lambda precision, electro plating / bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering with a variable course and fine control knob for voltage and a control knob current adjustments. The DC supply provides, 0 - 10v @ 0 - 5 amps, constant voltage and / or constant current. The digital meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel high current connections are provided with remote sense and voltage programming / tracking capabilities. Reconditioned and guaranteed. Checked and replaced any marginal capacitors.
  • Output: 0 - 10v @ 0 - 5 amps
  • Dimensions: 17" x 4" x 5.5"H
$259 each
Variable DC Power Supply
0 - 8v @ 0 - 10 amps
(PS) LLS5008
Lambda precision plating / bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering, with a direct entry keyboard for voltage and current adjustments. Fully regulated and precision power supply is vastly superior to simple plating "rectifiers" because it is accurately controllable yielding very consistent results and is the ideal power supply for plating applications that require voltages up to 8 volts and draw as much as 10 amps. The rear panel output connections are standard "barrier strip" type, additional connections are provided with remote sense and voltage programming / tracking capabilities.
  • Output: 0 - 8v @ 0 - 10 amps
  • Dimensions: 13" x 4" x 6"H
Originally sold for $1,300. Our price...
$349 each
Variable DC Power Supply
0 - 8v @ 0 - 20 amps
(PS) LLS6008
Lambda precision plating / bench / lab, regulated variable DC power supply (rectifier) with front panel or HP-IB programmable / GP-IB remote interface, digital volt / amp metering. Direct entry keyboard for voltage and current adjustments. The dc supply provides constant voltage and / or constant current. Fully regulated and precision power supply is vastly superior to simple plating "rectifiers" because it is accurately controllable yielding very consistent results, and is the ideal power supply for plating applications that require voltages up to 8 volts and draw as much as 20.0 amps. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provides accurate readings of both voltage and current and the rear panel output connections are standard "barrier strip" type, additional connections are provided with remote sense and voltage programming / tracking capabilities.
  • Output: 0 - 8v @ 0 - 20 amps
  • Dimensions: 14" x 8" x 4.5"H
$549 each
Regulated Variable Power Supply
0 - 10v @ 0 - 250 amps
(PS) EMS10-250-2-D-0209F
Lambda precision, electro plating / bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering.
  • Input: 190 - 250v AC, 60 Hz, 1 or 3 ph
  • Output: 0 - 10v @ 0 - 250 amps
  • Dimensions: 21" x 19" x 3.5"H
Currently selling for $3,750. Our price...
$1,489 each
Regulated Variable Power Supply
0 - 10v @ 0 - 200 amps
(PS) 3400D-10200
Power Ten power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming.
  • Input: 208v AC, 60 Hz, 1 ph
  • Output: 0 - 10v @ 0 - 200 amps
  • Dimensions: 21" x 19" x 3.5"H
*** SOLD OUT ***
Power Supply
0 - 10v DC @ 0 - 375 amps
(PS) 4600D-10375
Power Ten precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming.
  • Input: 195 - 250v AC, 60 Hz
  • Output: 0 - 10v @ 0 - 375 amps
  • Dimensions: 25"D x 19"W x 5.25"H
Originally sold for $4,850. Our price...
$1,990 each
Power Supply
0 - 10v DC @ 0 - 500 amps
(PS) 4600D-10500
Power Ten power supply. Digital readouts, front panel controls.
  • Input: 190 - 253v, 3 phase, 50/60Hz
  • Output: 0 - 10v DC @ 0 - 500 amps
  • Dimensions: 25"L x 19"W x 5.25"H
$2,195 each
Unregulated Linear Power Supply
12v DC @ 15 amps
(PS) 200B12HA
Acme unregulated linear power supply. 12v DC @ 15 amp output. 115 / 230v @ 50/60 Hz input. 8.1" x 5"W x 4"H. Brand new in the box!
$95 each
Boschert Power Supply
5 vdc @ 100 amps / 2x 12v DC @ 10 amps
(PS) XL750-3638
Boschert Computer Products power supply. 5v DC @ 100 amps. 2 x 12v DC @ 10 amps. 110v - 220v input. 5" x 8" x 13"L. New in the box!!
$275 each
Power One Linear Power Supply
5v DC @ 3 amps
(PS) HB5-3/OVP-A
Power One linear power supply. 5v DC @ 3 amp output. 100, 120, 220, 230 / 240v @ 47-63 Hz Input. Includes over voltage protection. 4" x 4-3/4" x 2"H. Used, excellent condition.
$10 each - $8.50 (6+)
Programmable DC Power System
0 to 3.6vdc @ 100 amps
(PS) 5691286-12
Elgar programmable DC power system. Heavy duty 5 foot cord with twist plug. Rack mountable. As new condition.
  • Input: 230v @ 7.5 amps, 50/60 Hz
  • Output: 0 to 3.6 vdc @ 100 amps = 360 watts
  • Dimensions: 19" x 6" x 23" deep
  • Weight: 80 lbs
$1,800 each
PowerOne Power Supply
5 vdc @ 3 amps
(PS) HB5-3/0VP
PowerOne open frame power supply.
  • Input: 115 / 230 vac @ 47 / 440 Hz
  • Output: 5 vdc @ 3 amps
  • Dimensions: 4" x 4-7/8" x 1-15/16"
***SOLD OUT ***
Condor DC Power Supply
5v @ 2 amps with OVP @ 6.2v - ±9 - 15v @ 0.4 amps
(PS) MTAA-16W-A
Condor DC power supply. Removed from new, unused equipment.
  • Input: 100 / 120 / 215 / 230 / 240v
  • Output: 5v @ 2 amps with OVP @ 6.2v, ±9 - 15v @ 0.4 amps
  • Dimensions: 4-1/4" x 6-1/2" x 2"
$19 each - $15 (3+)
Xentek Linear Power Supply
+5v DC @ 3 amps, +12v DC @ 3 amps (6 amps peak)
(PS) 6433
Xentek (or equivalent) linear power supply. 100/115/215/230v input. 47-440 Hz. +5v DC @ 3 amps, +12v DC @ 3 amps (6 amps peak). 60 watts. Used.
  • Input: 100/115/215/230v
  • Output: +5v DC @ 3 amps, +12v DC @ 3 amps (6 amps peak) 60 watt
  • Dimensions: 4-7/8" x 3-1/4"H x 7"L
$15 each
TDK-Lambda Power Supply
5v DC @ 1.5 amps
(PS) DSP10-5
TDK-Lambda power supply. New in box with din rail mount manual.
  • Input: 100-240v
  • Output: 5v DC, 7.5 watt at 1.5 amps
  • Dimensions: 3-1/2"H x 7/16"W x 2-3/16" deep
$17 each - $15 (6+), $12 (25+)
TDK-Lambda Power Supply
5v DC
(PS) DSP30-5
TDK-Lambda power supply. New in box with din rail mount manual.
  • Input: 100-240v
  • Output: 5v DC, 15 watt
  • Dimensions: 3-1/2"H x 2-1/8"W x 2-3/16" deep
$75 each
NJE Power Supply
5 vdc / ± 0.5v @ 6 amps
(PS) RSB5-OVP-TBC
NJE power supply. Adjustable over-voltage protection. Remote programming, remote sensing. Mil-spec. Includes manual. NSN: 6130-01-111-2232.
  • Input: 105 - 132 vac
  • Output: 5 vdc ± 0.5v, 6 amps
  • Dimensions: 5" x 6-1/2" x 3-1/2"H
$45 each
Switching Power Supply
5v @ 10 amps, 14.5v @ 1 amp, -12v @ 0.5 amps
(PS) CX70-9013
Summit / Basler switching power supply. NEW!! 115 vac.
  • 3 Voltages: 5v @ 10 amps, 14.5v @ 1 amp, -12v @ 0.5 amps
  • Dimensions: 5-1/8" x 12 x 1-3/4"H
$35 each
Celesta Switching Power Supply
5v @ 16 amps & 3.3v @ 30 amps
(PS) 043966C
Celesta switching power supply. Made in Canada by CSA. New!!
  • Input: 36 - 60vdc @ 6.5 amps max
  • Output: +5v @ 16 amps, +3.3v @ 30 amps
  • Dimensions: 3" x 10" x 1"H
$12 each - $9.95 (5+)
Lambda Power Supply
5v @ 5.8 amps
(PS) LXS-B-5-OV-R
Lambda regulated power supply. Used. Only one available.
  • Input: 105v - 132v, 47-63 Hz
  • Output: 5v DC @ 5.8 amps ±5%
  • Dimensions: 4-7/8" x 6-1/2" x 3-1/4"H
$30
Linear Power Supply
5v @ 18 amps
(PS) APS5-18
Adtech linear power supply. Brand new in the box!!
  • Input: 115 / 230v @ 47 - 440 Hz
  • Output: 5v @ 18 amps
  • Dimensions: 5"H x 14"W x 3-1/2" deep
$65 each
Power Supply
5v @ 1.5 amps
(PS) X1505-Z01
Ecobloc P. Fontaine power supply. Space Lab spare.
  • Input: 127v / 220v
  • Output: 5v @ 1.5 amps
  • Dimensions: 2-3/8" x 2-3/4" x 4-1/2"
$45 each
Astec
5 vdc @ 70 amps & 12 vdc @ 20 amps
(PS) 30-28231-01
Astec Digital Equipment Corp. 556 watt power supply designed for internal equipment placement. 120v or 240 vac at 10 amps / 5 amps input. Brand new, unused. Original cost $3250. Pin-out label.
$299 each
Switching Power Supply
+5v @ 74 amps / +3.3v @ 60 amps /
+12v @ 10 amps / -12v @ 2.5 amps
(PS) 6064662
C & D Technologies Switching Power Supply. Each power supply comes with individual test data covering: line regulation, load regulation, current share / alarms, power limit, current limit over voltage, holdup and certification of passage of safety tests. Keylock.
  • Input: 120 - 240v, 8 amps - 4 amps, 50/60 Hz
  • Output: +5v @ 74.0 amps, +3.3v @ 60 amps, +12v @ 10.0 amps, -12v @ 2.5 amps. Combined, 75 amps total
  • Dimensions: 6" x 13" x 3-1/2"H
$65 each - $59 (4+), $53 (50+)
MagneTek Power Supply
5 vdc @ 74 amps / 3.3 vdc @ 60 amps /
12 vdc @ 12 amps / -12 vdc @ 3 amps
(PS) TM1D-4CBDD
MagneTek 500 watt switching power supply. Brand new! Packed 3 per factory carton.
  • Input: 36 - 75 vdc @ 20 amps
  • Outputs: 5 vdc @ 74 amps, 3.3 vdc @ 60 amps, 12 vdc @ 12 amps, -12 vdc @ 3 amps
  • Dimensions: 5"W x 12"L x 3-1/2"H
$25 each - $20 (4+), $15 (50+)
Power One PC Mount DC/DC Module
±5v @ 1 amp
(PS) IWD4805
Power One PC mount DC/C module. 1.5 watt, DIP.
  • Input: 36-72v
  • Output: ±5 @ 1 amp
  • Dimensions: 2"L x 1"W x 0.4"H
$35 each - $30 (10+), $25 (100+)
Power Supply Module
5 vdc @ 1 amp
(PS) PK11-100K
Semiconductor Circuits power supply module. 115 vac input. 5 vdc @ 1 amp. 2-1/2" x 3-1/2" x 1-3/8" high. Space Lab spare part.
$45 each
Power Supply
Main1: +5v @ 80 amps
(PS) QS4D2BCG1
Cherokee Int'l power supply / MFN-SCANBE. Appears new. Terminal strips and stud output. Max output: 500 watts.
  • Input: 115v / 230v / 50/60 Hz @ 10 / 5 amps
  • Output: Main1: +5v @ 80a; Aux2: +12v @ 6a; Aux3: -12v @ 6a; Aux4: -5v @ 6a; Aux5: +12v @ 12a
  • Dimensions: 5" x 4-1/4" x 15"
*** SOLD OUT ***
Power Supply
5v DC @ 20 amps / +15v DC @ 4 amps /
-15v DC @ 4 amps
(PS) SWS152T-5/15/15
Acme power supply. 150 watts. Brand new in the box!
  • Input: 115 / 230v @ 47-440 Hz
  • Output: 5v DC @ 20 amps, +15v DC @ 4 amps, -15v DC @ 4 amps
  • Dimensions: 4-3/4" x 2-1/2"H x 11-1/2"L
$85 each
Power Supply
+5v DC @ 6 amp / +12v DC @ 1 amp / -12v DC @ 1 amp
or ±15v DC @ 0.8 amp
(PS) HCAA60W-A
Condor linear power supply.
  • Input: 100/120/230/240v @ 50/60 Hz
  • Output: +5v DC @ 6 amp, +12v DC @ 1 amp, -12v DC @ 1 amp, or ±15v DC @ 0.8 amp
  • Dimensions: 5" x 3"H x 9"L
$19 each
Jeta Power Supply
1,850 watts
(PS) CP137
Jeta Model CP137 power supply. No manual, no cords. Not rack mountable. Mfg. P/N: 725-3308-1.
  • Input: 230 vac
  • Outputs: 1850 watts,
    V1: 5v @ 300 amps, V2: 12v @ 20 amps
    V3: 5v @ 10 amps, V4: 12v @ 5 amps
  • Dimensions: 12" x 18-1/2" x 5"H
*** SOLD OUT ***
Power Supply
5.1 vdc @ 0.375 amps
(PS) M-5.1-0.375A
TechniPower power supply. 4 mounting studs. Used, removed.
  • Input: 105 - 125 vac, 50 - 400 Hz
  • Output: 5.1 vdc @ 0.375 amps
  • Dimensions: 2-1/2" x 3" x 4-7/8"H
$45 each
Open Frame Power Supply
5v DC @ 1.25 DC amps
(PS) HA5-1.2/0VP
Power One, open frame power supply. 1.2 DC amperes nominal single power output current. Includes data sheet. Weighs 1.25 lbs. New, old stock. NSN: 6130-01-160-5342.
  • Input: 115 / 230 vac, 47-440 Hz
  • Output: 5v DC @ 1.2 DC amps
  • Dimensions: 3.75"L x 1.6"H x 3"W
$35 each
Switching Power Supply
+5v @ 15 amp / +12v @ 4 amp / -12v @ 4 amp /
-5v @ 2 amp / +24v @ 4 amp
(PS) GOL-150LP
GSC Electric 150w switching power supply. 5 outputs. +5v @ 15 amp / +12v @ 4 amp / -12v @ 4 amp / -5v @ 2 amp / +24v @ 4 amp. 110 / 220v input. Line regulation: 0.2%. Load regulation: 0.2% - 5v outputs, 2.5% for others. 13-1/2" x 5" x 2-1/2". New in the box!!
$49 each
Highly Regulated Power Supply
6v DC @ 3 amps DC
(PS) PL6.0-3.0A
TechniPower / Unipower highly regulated power supply / converter. Great filament supply for high end audio amps. 3-5/16" x 2-11/16" mounting centers. New surplus. Alt. P/N: 138C004H02. NSN: 6130-00-137-7695. DC: 1978.
  • Input: 105 - 125v AC @ 50 / 400 Hz
  • Output: 6v DC @ 3 amps DC
  • Dimensions: 4.31"L x 4.75"H x 3.69"W
$89 each
Technipower Regulated Power Supply
6v DC @ 375 mA
(PS) 227-4022
TechniPower regulated power supply. Hermetically sealed. 6v DC - trimmable. NSN: 6130-00-056-8126.
  • Primary: 105 - 125v AC / 50 - 400 Hz
  • Output: 6v DC (trimmable) @ 375 mA
  • Dimensions: 3" x 3-1/2" x 5"H
$49 each
High Stability Power Supply
6.8v DC @ 0.5 amp ±0.5%
(PS) PB3367
CEA high stability supply. Used, removed.
  • Input: 105 - 125v AC @ 48 - 62 Hz
  • Output: 6.8v DC @ 0.5 amp ±0.5%
  • Dimensions: 3-1/4" x 3-7/8" x 5-1/4"H
$50 each
Unregulated Linear Power Supply
7v @ 10 amps
(PS) 100B7HA
Acme Transformer unregulated linear power supply. 90% efficiency, open frame. UL listed.
  • Input: 115 / 230v @ 47 / 63 Hz Single Phase
  • Output: 7v DC @ 10 amp / 70 watts
  • Dimensions: 4"L x 3.25"W x 7.12"H, 7lbs
$89.95 each - $79.95 (3+)
Power Supply
0 - 7.5 vdc @ 0 - 2 amps
(PS) ABC7.5-2M
Kepco DC variable power supply with remote sense.
  • Input: 115 / 230v @ 50 - 400 Hz
  • Output: 0 - 7.5 v DC @ 0 - 2 amps
  • Dimensions: 8-1/8" x 9-3/4"L x 4-3/4"H
$75 each
Switcher Power Supply
7.5 vdc @ 20 amps
(PS) S-150-7.5
Meanwell switcher power supply.
  • Input: 110 - 120v, 220 - 240v
  • Output: 7.5v DC @ 20 amps
  • Dimensions: 4-1/2" x 2" x 8"L
$22 each
Lambda Power Supply
0 to 7.5v @ 0 to 300 amps / 2,500 watts
(PS) EMS7.5-300-2D
Lambda power supply. Remote or front panel control. Includes manual. Brand new!!
  • Input: 190 to 250 vac, 1 phase @ 20 amps or 190 to 250 vac, 3 phase @13.5 amps, 47 to 63 Hz
  • Output: 0 to 7.5v @ 0 to 300 amps
  • Dimensions: 3.5"H x 19"W x 17.8" deep
  • Weight: 35 lbs
$1,595 each
Power Supply
8.1 vdc (Trimmable) @ 12 amps
(PS) PM8.1-12.0A
Technipower power supply. Hermetically sealed. Terminals and four 1/4-20 mount studs on bottom. No box.
  • Input: 105 / 125 vac, 50 / 420 Hz
  • Output: 8.1 vdc (trimmable) @ 12.0 amps
  • Dimensions: 6-1/2" x 6-3/4" x 7"H
$349 each
Power One PC Mount DC/DC Module
9v @ 200ma / 1.5 watts
(PS) BRS509
Power One PC mount DC/C module. 1.5 watt, DIP.
  • Input: 4.65 to 5.5v
  • Output: 9v @ 200ma
  • Dimensions: 1.25"L x 8"W x 4"H
$39 each - $36 (10+), $33 (100+), $30 (1,000+)
Linear Power Supply
±12v DC @ 0.75 amps
(PS) DAPS12-.75
Adtech linear power supply. Brand new in the box!!
  • Input: 115 / 230v AC @ 47 - 440 Hz
  • Output: ±12v @ 0.75 amps
  • Dimensions: 5" x 4" x 3" overall
$24 each
Linear Power Supply
±12v DC @ 0.75 amp
(PS) DAPS-12-.75A
AdTech linear power supply. Brand new in the box!
  • Input: 115 / 230v @ 47-440 Hz
  • Output: ±12v DC @ 0.75 amp
  • Dimensions: 3-3/4" x 4-3/4" x 2-3/4"H
$22 each
Power Supply
12v DC @ 1 amp
(PS) ADXC0017
Converter Concepts Model ADXC0017 power supply. Ventilated plastic cabinet. IEC cord input for 115v AC (115 - 250v AC). Brand new in the box! Makes a great TV cabinet project.
  • Input: 100 - 250v @ 0.4 amps, 50/60 Hz
  • Output: 12v DC @ 1 amp
  • Dimensions: 8-3/8" x 4-1/4" x 3-1/4"H
$10 each - $7.50 (6+)
Lambda Regulated Power Supply
12v DC (±5%) @ 26 amps
(PS) SWS300-12
Lambda regulated power supply. New, unused. Brand new in the box!!
  • Input: 100 - 240v AC @ 4.4 amps, 50/60 Hz
  • Output: 12v DC (±5%) @ 26 amps, 300 watts
  • Dimensions: 4" x 2" x 8-1/2"L
$85 each - $73 (6+), $69 (20+)
Battery-Packed Power Supply
(PS) TXPRS0002
Qualcomm battery-packed power supply. Requires sealed lead acid 4 AH battery (not included). 90mm x 70mm x 107mm (approximate). Essentially, this is a housing with charger for battery backups.
$19.95 each
Switcher Power Supply
12v DC @ 30 amp
(PS) LIHUA-360W
LH switcher power supply.
  • Input: 110 / 220v
  • Output: 12v DC @ 30 amp
  • Dimensions: 4-1/2" x 2"H x 8-1/2"L
$25 each
Power Supply
12v DC @ 5 amps
Universal Wall Adapter 16.5 vac 40va
(PS) ATS065T-P120
Adapter Tech power supply. Originally a power supply for Firewire Hub. 5.5mm power plug, positive center. Requires AC power cord like (WCC) BMC-3. Alternate P/N: TR9CE5000CCPFRG2425.
  • Input: 100-240v AC @ 50/60 Hz
  • Output: 12v DC @ 5 amps
$21.50 each - $19.77 (6+)
Lambda Power Supply
12 - 15 vdc @ 1.6 amps
(PS) LXD-B-152-R
Lambda regulated power supply. Used. Only one available.
  • Input: 105v - 132v, 47-63 Hz
  • Output: 12 - 15v DC @ 1.6 amps
  • Dimensions: 5" x 6-1/2" x 3"H
$22
Linear Dual Power Supply
12 - 15 vdc @ 0.7 amps x 2
(PS) SPS30DA12/15-OVP-21
Standard Power / Acme linear dual power supply. 0.1% line-load regulation. NSN: 6130-01-099-6910.
  • Input: 115v / 230v @ 47 - 440 Hz
  • Output: 12 - 15v DC @ 0.7 amps x 2
  • Dimensions: 2-1/2" x 4" x 4-3/4"
$25 each - $23 (3+), $21 (12+)
Globtek Power Supply
12v DC @ 5 amps / 60 watts
(PS) TR9CE5000CCPFR
Globtek power supply. 60 watts. 5.5mm power plug positive center. Requires AC power cord like (WCC) BMC-3. Alt. P/N: GT-81081-6012-T3.
  • Input: 100 - 240v AC @ 50/60 Hz
  • Output: 12v DC @ 5 amps
  • Dimensions: 2-1/8" x 1-1/4" x 4-3/4"L
$18.75 each - $16 (6+), $15 (25+), $14 (100+)
Lambda Power Supply
12v @ 12.5 amps / 150 watts
(PS) SVS150-12
Lambda adjustable power supply. 150 watts.
  • Input: 85v - 132v / 180v - 265v @ 47 / 63 Hz
  • Output: 12v nominal @ 12.5 amps (11.4 - 12.6v adjustable), 150w
  • Dimensions: 4.75" x 1.77"H x 8.5"L
$95 each
Unregulated Linear Power Supply
12v @ 7 amp
(PS) 100B12HA
Acme Electric Corporation unregulated linear power supply. 90% efficiency, open frame. UL listed.
  • Input: 115 / 230v @ 47 / 63 Hz Single Phase
  • Output: 12v DC @ 7 amp / 85 watts
  • Dimensions: 4"L x 3.25"W x 7.12"H, 7 lbs
$79.95 ea - $65 (3+), $57 (6+), $49 (25+)
Todd Mfg. Power Supply
12 vdc @ 42 amps / 500w
(PS) SC12-42
Todd Manufacturing power supply. Used but in excellent condition.
  • Input: 115v / 230v @ 12 amps / 6 amps 50 / 60 Hz
  • Output: 12 vdc @ 42 amps / 500 watts
  • Dimensions: 5" x 2-1/2"H x 11-1/2"L
*** SOLD OUT ***
Texas Instruments Power Supply
+12 vdc @ 400ma, +5 vdc @ 1.2 amps
-5 vdc @ 200ma
(PS) PWRSPY99
It never fails. Dig deep enough in the warehouse and you can find buried treasure. We ran out of these nice triple voltage supplies once upon a time. Now we have about 200 in stock... while they last. You supply 15 - 30 vac to the board.
$4 each - $3.50 (3+), $3 (15+)
Modular DC Power Supply
12v DC @ 2.1 amps
(PS) LUS9A-12
Lambda LUS9A-12 modular DC switching power supply. Includes instruction sheet (1985). New, old stock. Never used. Original package. NSN: 6130-01-156-9751.
  • Input: 85 - 132v AC, 47-440 Hz
  • Output: 12v DC @ 2.1 DC amps
$35 each
Tri-Electron
0 to 12 vdc / 0 to 25 amps
(PS) TR100-25-12
Variable supply with dual meters (one digital, one analog). 0 to 12 vdc, 0 to 25 amps, front panel adjustable. 15" x 18" x 11-1/2" high. Binding post outputs. 115v, 5 amp input. Used.
$275 each
TDK-Lambda Power Supply
12v DC @ 4.5 amps
(PS) DSP60-12
TDK-Lambda power supply. New in box with din rail mount manual.
  • Input: 100-240v AC
  • Output: 12v DC, 54 watt @ 4.5 amps
  • Dimensions: 3-1/2"H x 2-3/4"W x 2-3/16" deep
$35 each - $33 (3+), $30 (12+)
High Stability
Regulated Power Supplies
(PS) NP3.0-6.0
High stability regulated power supply. 3 vdc @ 6 amps, 4" x 4-5/8" x 6" high.
*** SOLD OUT ***
(PS) 227-2745
High stability regulated power supply. 5.1 vdc @ 6 amps. 320 to 480Hz. 4-1/4" x 3-5/8" x 5-5/8" high.
$55 each
High Stability
Regulated Power Supplies (cont'd)
(PS) PB3367
High stability regulated power supply. 6.8 vdc @ 0.5 amps, 4-7/8" x 4" x 5" high.
$25 each
(PS) NP17.5-1.5
High stability regulated power supply. 17.5 vdc @ 1.5 amps, 4" x 4-5/8" x 6" high.
$65 each