Toggle Switches

(SWT) DP1A1B1C1D2E1

5 amp @ 50 vdc / 115 vac
Requires 1/4" panel opening
0.51" x 0.51" x 0.51" deep

The Torsion Balance Co. DPDT toggle switch. 5 amp, 50 vdc / 115 vac. 6 solder tabs. Gold terminals. 0.51" x 0.51" x 0.51" deep. Requires 1/4" panel opening. 5930-00-724-6044.

(SWT) 7101SDC

SPDT / 2 amp @ 250v AC
1/4" x 1/2" x 1-3/8"' overall
Manufactured by C&K

C&K toggle switch. Flat-BAT PC board mount. SPDT. 2 amp @ 250v AC. Flat toggle. On-On. 1/4" x 1/2" x 1-3/8"' overall.

(SWT) U-11

2 amp @ 250v AC / 5 amp @ 120v AC / On - On
SPDT
Right angle PC mount

C&K toggle switch. SPDT. Right angle PC mount. ON-ON. 250 vac @ 2 amps, 120 vac @ 5 amps.

(SWT) 40-510

Fits arcade machines
5 amp @ 120v AC / Fits Arcade Machines
Manufactured by Calrad

Calrad right angle toggle switch. SPDT. PC mini toggle switch. 5 amp @ 120v AC. On-On. Fits arcade machines. DC 80+

(SWT) STM-DTCO

DPDT / 5 amp @ 125v
1/4" mounting hole
Manufactured by STM

STM mini toggle switch. DPDT - center OFF, 5 amp @ 125v. 1/4" mounting hole.

(SWT) 7107

SPDT / 5 amp / Off - On
SPDT
1/4" hole mount

C & K SPDT momentary switch. 5 amps, solder terminals, 1/4" hole mount. Momentary in one direction, off, maintained on.

(SWT) 7201SYZQE

5 amp / On - Off
Through hole or bushing mount in 1/4" hole
0.5" x 0.45", 0.67" behind

C&K DPDT toggle switch. On - Off. 115v, 5 amp. 230v, 0.4va. 0.5" x 0.45", 0.67" behind. Through hole or bushing mount in 1/4" hole.

(SWT) CH2P-PT

Hermetically sealed, no exposed terminals
3 amp @ 250v / DPDT
Manufactured by Cutler-Hammer

Cutler-Hammer panel mount toggle switch with pigtails. 3 amp @ 250v, DPDT. Maintained - On / On. Hermetically sealed, no exposed terminals. UL / CSA.

(SWT) 8000XY

SPST / 6 amp @ 125v / 3 amp @ 250v
1.388"H x 0.496"W x 0.953" deep
Manufactured by Copper Industries

Copper Industries toggle switch. SPST, 6 amp @ 125v, 3 amp @ 250v. 1.388"H x 0.496"W x 0.953" deep. New gov't pkg, Circa 1961. NSN: 5930-00-188-1048.

(SWT) MTA106D

6 amp @ 125v AC / 3 amp @ 250v AC
0.625" behind panel depth
0.506" x 0.306"

Alco toggle switch. SPDT. 6 amp @ 125 vac, 3 amp @ 250 vac. Panel bushing mount. 0.506" x 0.306", 0.625" behind panel depth. Removed from new equipment.

(SWT) CARL-SPDT

6 amp @ 125v AC / 3 amp @ 250v AC / Center Off
250v
3 amp

Carling SPDT toggle switch. On - Off - On. 6 amp, 125v, 3 amp, 250v. Made in the USA.

(SWT) SF22EGW/56

DPDT / Momentary / 6 amp @ 125v AC
1-3/8" mounting centers
3/32"d x 1/8"L BAT

C-H mini BAT toggle switch. DPDT - momentary. 6 amp @ 125v AC. 3/32"d x 1/8"L BAT. 1-3/8" mounting centers.

(SWT) JT-2650

6 amp
1/4" hole
3PDT

C&H 6 amp 3PDT rounded bat toggle mounts @ 90º angleto PC boards or in 1/4" hole.

(SWT) 140-192B

5 amp @ 250v AC
UL listed
Panel mount, 1/2" x 1" face

Loral Electronic Systems momentary toggle switch. 5 amp @ 250v AC. Chrome bat and hardware. Light touch to engage. Dual micro switches, MS25085-1. Panel mount, 1/2" x 1" face. UL listed. NSN: 5930-00-561-2419.

(SWT) ST42G

SPDT / 8 amp @ 125v AC
Requires 1/2" diameter panel opening
1-1/8" x 5/8" x 1" behind

JBT toggle switch. SPDT. Momentary-OFF-Momentary. 8 amp @ 125v AC. Spring return each direction. Requires 1/2" diameter panel opening. 0.105" terminal lug ID. 1-1/8" x 5/8" x 1" behind.

(SWT) ST52K

DPST / 9 amp @ 220v AC
1" behind
3/4" x 1-3/8"

C-H toggle switch. DPST. Maintained-maintained. On-Off. 9 amp @ 220v AC. 1/2" panel opening required. 3/4" x 1-3/8".
1" behind.

(SWT) ST52P

DPDT / 10 amp
1" behind panel
Fits 7/16" hole

JBT toggle switch. DPDT. Center-OFF. 10 amp. Solder lugs. Fits 7/16" hole. 1" behind panel. DC 77.

(SWT) MS25201-4

10 amp / Center Off
1/2" hole mount

10 amps, screw terminals, 1/2" hole mount.

(SWT) TS04-049

DPDT / On-On / 10 amp @ 125v AC
Screw terminals
Mounts in 7/16" hole

Toggle switch. DPDT - On-On. 10 amp @ 125v AC. Screw terminals. Mounts in 7/16" hole.

(SWT) TIGC51-7SBL

2010 Winner!! Best Choice Toggle Award
15 amp @ 115v AC / 10 amp @ 250v AC / On - Off - On
Nice!! Packed 35 pieces per carton, 10 cartons per case

2010 Winner!! Best Choice Toggle Award. Carling toggle switch. 15 amp @ 115 vac, 10 amp @ 250 vac. 3/4 HP, 125 - 250 vac. SPDT. On - Off - On. Center off. Spade / solder terminals. Fits 3/4" x 1-1/2" panel hole. Nice!! Packed 35 pieces per carton, 10 cartons per case.

(SWT) CH3PDT

3PDT / 15 amp @ 125v AC / 10 amp @ 250v AC
1.37" x 1.83" x 1.17" deep
UL & CSA listed

C-H panel bushing mount toggle switch. 3PDT. 15 amp @ 125v AC, 10 amp @ 250v AC. 1 HP 1-2Ph 125-480v AC. 1HP 3Ph 125-600v AC. 1.37" x 1.83" x 1.17" deep. UL & CSA listed.

(SWT) 720304A

15 amp @ 125v / 10 amp @ 250v / 4PDT
1/2" opening
1-1/2" x 1-3/8" x 1" deep

Cutler-Hammer toggle switch. 4PDT. 10 amp @ 250v, 15 amp @ 125v, 3/4 Hp, 250 vac. On-On maintained. Chrome. Panel mount, 1/2" opening. 1-1/2" x 1-3/8" x 1" deep.

(SWT) CH15

15 amp @ 125v / 10 amp @ 250v / On / Off
Fabulous 1960's "Ball" bat
2 pole

Toggle switch. 2 pole, On / Off. 15 amp @ 125v, 10 amp @ 250v. Insulating paper skirt. Fabulous 1960's "Ball" bat. CSA / UL.

(SWT) 7569K53C22

15 amp @ 125v / 10 amp @ 250v
Momentary On - Off Momentary
Requires 1/2 inch panel opening

Cutler-Hammer toggle switch. Momentary On - both directions. Center off. DPDT. 10 amp, 250v, 15 amp, 125v. Red bat. Requires 1/2 inch panel opening.

(SWT) 8537K91A

DPDT / 18 amp @ 125v AC / 9 amp @ 250v AC
Requires 9/16"D opening
0.903" x 1.336" x 1.25" behind

Cutler-Hammer Eaton toggle switch. DPDT. 18 amp 1/2 HP, 125 vac. 9 amp 1 HP, 250 vac. Locking bat with center off. Pull to lock in all three positions. Requires 9/16"D opening. 0.903" x 1.336" x 1.25" behind.

(SWT) ST52N/8825K6

DPDT / 20 amp
Requires 1/2" diameter panel opening
3/4" x 1-3/8" x 1" behind

JBT toggle switch. DPDT. 20 amp. Maintained-maintained. On-on. Oversized 0.122" terminal holes. Up to 9AWG. Requires 1/2" diameter panel opening. 3/4" x 1-3/8" x 1" behind.

(COL) 266-5424-010

20 Amp
Use as replacement for 380 or for your own project
Manufactured by Cutler-Hammer

Cutler-Hammer heavy duty toggle. 20 amp. Use as replacement for 380 or for your own project.

(SWT) MS-24523-23

SPDT / 20 amp @ 115v AC/28v DC / On-On
1-1/4" behind panel depth
Requires 1/2"D panel opening

Panel mount toggle switch. Vapor tight / sealed bat. SPDT. 20 amp@ 115 vac, 28 vdc. On - On. Requires 1/2"D panel opening, 1-1/4" behind panel depth. P/N: 1TL1-3.
Made by Honeywell.

(SWT) 8906K1666

2P2T / 20 amp @ 115v AC
Down postion maintained, locked
1-1/8" x 0.55" x 0.862" behind panel depth

Aircraft locking bat toggle switch. Panel mount. 2P2T. 20 amp @ 115V AC. Screw lug terminals. Up position maintained not locked. Down postion maintained, locked. 1-1/8" x 0.55" x 0.862" behind panel depth. NSN: 5930-00-177-2783. Alt. P/N: 7828019-503.

(SWT) 80602-192

20 amp @ 125v AC / 10 amp @ 250v AC / On / Off
Panel mounts in 0.47" diameter hole
1" x 2" x 3/4" deep

AH & H toggle switch. 2 pole, On / Off. Circa 1960s. 20 amp @ 125v AC, 10 amp @ 250v AC. Fiberboard shield. Panel mounts in 0.47" diameter hole. 1" x 2" x 3/4" deep.

(SWT) 7101-LBAT

SPDT / 0.4 VA Max
1"L BAT
1/4" x 1/2"

C&K toggle switch. SPDT. 0.4 VA max. On-On. 171 long lever/leads. 1/4" diameter panel opening required. 1/4" x 1/2". 1/2" behind plus lead. 1"L BAT. Used.

(SWT) 7103-J60ZBE2

SPDT / 0.4VA Max / On - Off - On
1-5/16" x 3/4" x 15/32"
Fits 9/16" x 15/32" hole

C&K miniature flat BAT toggle switch with lever handle. SPDT. 0.4 VA max. On-Off-On. Center - OFF. Not momentary. Snap-in mount; no bezel. Gold contacts. Solder eyelets.
1-5/16" x 3/4" x 15/32". Fits 9/16" x 15/32" hole.

(SWT) SP621M

6PDT
Alt. P/N: NSN: 5930-01-176-6433

Toggle switch assembly. 6PDT. Gold turret terminals. 8-32 threaded shaft. 1.31" x 2.065" x 2.39" behind panel depth. Alt. P/N: 420695-1. NSN: 5930-01-176-6433.This switch is very unique. It has a momentary spring loaded toggle that activates 3 SPDT micro-switches one-at-a-time. Center position is neutral. As the toggle is pushed in one direction or the other, one micro-switch is engaged. Push the toggle a little further and a second switch is engaged along with the first. Push the toggle all the way to the stop and the third switch is engaged - Now all 3 are made. Same operation in opposite direction. Made like a battle tank by Machine Components Corporation.

(COL) 757-8960-001

Guard switch
Hazard marking
Alt. P/N: NSN: 5930-01-011-4160

Toggle guard switch . Hazard marking.
NSN: 5930-01-011-4160.

(SWT) 01-17.301-21

SPDT
1" behind panel depth
0.356"D body,

Secme (France) toggle switch from the Space Lab program. SPDT. Panel mount with hardware. Chrome knurled trim nut. 3/8"L chrome bat. 0.356"D body, 1" behind panel depth.

(SWT) 12146DGK2V

On - On
1" behind panel depth
9/16" x 9/16"

British Aircraft DPDT locking toggle switch. On - On. 9/16" x 9/16", 1" behind panel depth. NSN: 5930-01-052-6457. Current OEM price is over $400!! Our price...

(SWT) CST-022RN

DPDT
11/16" threaded mounting centers -front plate
3/8" x 3/4" PC mounting grid

Alco PC mount toggle switch. DPDT. Momentary - non-shorting. Brake-Before-Make. 11/16" threaded mounting centers -front plate. 3/8" x 3/4" PC mounting grid. Made in Japan.

(SWT) ST52N

2PDT
New, unused

Toggle switch. On - on, 2PDT. Pre-wired to reverse poles with 2 foot leads. New, unused. Mfg. P/N: ST52N-8825KS.

(SWT) TG3M-PCL-2

On - Off - On
1/4" hole or PC mount
1/2"W x 1/4"D x 1-3/16"L

Arrow Hart instrument grade momentary action both directions(center off), 1/4" hole or PC mount, low resistance, 50k life cycle. Goldterminals. 1/2"W x 1/4"D x 1-3/16"L. Removed, but very clean.

(SWT) 7401-RA4PDT

On - On
1/2" x 3/4"
250 vac @ 2 amps, 120 vac @ 5 amps

C&K toggle switch. 4PDT. Right angle PC mount. ON-ON. 250 vac @ 2 amps, 120 vac @ 5 amps. 1/2" x 3/4".

(SWT) B12X003

Sub-Mini Toggle Switch
Right angle
Manufactured by NKK

NKK sub-mini toggle switch. On / Off. SPDT / 90º PCB mount. Right angle.

(SWT) MS25068-23

20 amp @ 28v DC/115v AC / On / On Maintained
1.33" x 1.44"
1.25" behind panel depth

C&H toggle switch. 4PDT, On / On, maintained. Lever seal, screw terminals. 20 amps, 28 vdc / 115 vac. 1.33" x 1.44", 1.25" behind panel depth. Mounts in 3/8" hole.

(SWT) 7105P3DV70B

Momentary - Off - Momentary
Flat bat
Manufactured by C & K

C & K SPDT Momentary - off - momentary switch. Flat bat. PC mount.

(SWT) KS21776-2881

DPDT / Momentary
1-1/4" x 3" x 7/8"D
Manufactured by Western Electric

Western Electric swita terminal. DPDT-momentary. Miniswitch mounted on frame with terminal screws. 1-1/4" x 3" x 7/8"D.

(SWT) 8V10128

25 ma @ 20vDC
PC mount
0.5" x 0.9"L

Microswitch SPDT toggle switch. 25 ma @ 20vDC. PC mount. ON-ON. 0.5" x 0.9"L blue paddle.

(SWT) 20902AZ

1 amp @ 250v / 3 amp @ 125v
Fits up to 0.7" thick panel
Manufactured by Arrow Hart

Arrow Hart DPST toggle switch. 1 amp @ 250v / 3 amp @ 125v. Short ball bat handle longneck. Fits up to 0.7" thick panel.

(SWT) 20905BX

1 amp @ 250v / 3 amp @ 125v
1" behind
Fits 0.475" hole

Arrow Hart vintage DPDT toggle switch. 1 amp @ 250v / 3 amp @ 125v. Short bat. Fits 0.475" hole. 1" behind. Switch is maintained.

(SWT) 20905C

Mounts in 0.475" hole
Fits 0.9" thick panel
1 amp @ 250v / 3 amp @ 125v

Arrow Hart vintage DPDT toggle switch. 1 amp @ 250v / 3 amp @ 125v. Short ball bat. Fits 0.9" thick panel. Mounts in 0.475" hole.

(SWT) 20905KA

1 amp @ 250v / 3 amp @ 125v
Mounts in 0.475" hole
Fits up to 0.9" thick panel

Arrow Hart DPDT toggle switch. 1 amp @ 250v / 3 amp @ 125v. Normal 1/2" long neck bat handle. Fits up to 0.9" thick panel. Mounts in 0.475" hole.

(SWT) 20907GA

1 amp @ 250v / 3 amp @ 125v
Fits 0.475" hole
Long 5/8" bat

Arrow Hart DPST toggle switch. 1 amp @ 250v / 3 amp @ 125v. Long 5/8" bat. Fits 0.475" hole.

(SWT) 21350EH

1 amp @ 250v / 3 amp @ 125v
1/2" behind
0.475" mounting hole

Arrow Hart vintage SPDT toggle switch. 1 amp @ 250v / 3 amp @ 125v. 0.475" mounting hole. 1/2" behind.

(SWT) U18

2 amp @ 250vAC / 5 amp @ 120vAC
1/4"D hole mount
Manufactured by C&K

C&K SPDT toggle switch. 2 amp @ 250vAC / 5 amp @ 120vAC. Flat bat momentary. Wire wrap terminals. 1/4"D hole mount.

(SWT) 4TL1-70E

3 amp @ 125vAC "L" / 10 amp @ 125/250/277vAC
1/2 H.P. @ 250/277vAC
Manufactured by Microswitch

Microswitch 4PDT locking on-on-on toggle switch. 3 amp @ 125vAC "L" / 10 amp @ 125/250/277vAC. 1/4 H.P. 125vAC. 1/2 H.P. @ 250/277vAC. Momentary - center off.

(SWT) TT-11

3 amp @ 0.4 VA
Fits 0.195" hole
Manufactured by ALCO

ALCO SPDT mini toggle switch. 3 amp @ 0.4 VA. On-On. Fits 0.195" hole. Hardware includes O-ring, nut, and washer. Make before break. U.S. made. Alt P/N: TTE-70197.

(SWT) CHSTUB

DPST / 6 amp @ 125v / 3 amp @ 250v
1-1/8" x 5/8" x 5/8" behind
Requires 1/2" opening

Cuttler Hammer toggle switch. DPST, 6 amp @ 125v, 3 amp @ 250v. 0.359"L stubby bat. Panel bushing mount. 6" pigtails. Requires 1/2" opening. 1-1/8" x 5/8" x 5/8" behind. DC: 77+.

(SWT) ST-42B

10 amp
Requires 1/2" panel opening
1-1/2" x 5/8" x 1" behind

Toggle micro switch. 1P1T. 10 amp. Momentary, normally "ON". Requires 1/2" panel opening. 1-1/2" x 5/8" x 1" behind.

(SWT) ST-42G

10 amp @ 250vAC / 15 amp @ 125v AC
0.116"D terminal solder lug
Requires 1/2"d panel opening

JBT toggle switch. 10 amp @ 250v AC / 15 amp @ 125v AC. ON (momentary)-OFF-ON (momentary). Panel mount. Requires 1/2"d panel opening. 0.116"D terminal solder lug. New-surplus.

(SWT) AH-SPDTMOM

10 amp @ 250vAC / 15 amp @ 125vAC
1" behind panel depth
3/4 HP @ 115v/230vAC

A-H toggle switch. SPDT. 10 amp @ 250v AC / 15 amp @ 125v AC. 3/4 HP @ 115v/230vAC. Momentary- Center (OFF) - Momentary. Requires 1/2" panel opening. 1" behind panel depth. UL listed.

(SWT) PRONIC

DPST / 15 amp @ 125v AC
1/-5/8" c-c mount holes
1.9" overall mount bracket

Pronic toggle switch. DPST. 15 amp @ 125v AC. Red flat paddle bat. 1/-5/8" c-c mount holes. 1.9" overall mount bracket. 1/4" spade or solder terminals. 1-1/4" x 3/4" x 1-1/2" deep. CSA listed.

(SWT) MS24525-23

15 amp @ 125/250vAC
4P2T-maintained
1.319" x 1.637" x 1.338" behind

Microswitch toggle switch with hardware. 15 amp @ 125/250vAC. 4P2T-maintained. 1/2 HP @ 125v Ac. 1 HP @ 250vAC. 2 position.. On-On. Panel bushing mount. SA-125vAC "L". LTL 1-3 Black. Screw terminals. Bat has dust/moisture seal. Requires 1/2" opening. 1.319" x 1.637" x 1.338" behind.

(SWT) U11PAD

SPDT / 2 amp @ 250vAC / 5 amp @ 120v AC
Fits 1/2" x 5/8" hole
Includes bezel

C&K paddle toggle switch. SPDT. 2 amp @ 250v AC / 5 amp @ 120v AC. On-On. PC mount. Includes bezel. Fits 1/2" x 5/8" hole. Removed from new/unused equipment.

(SWT) 7101-CBO

w/ Red LED / 0.4 VA Max
Used-removed from new equipment
Fits 1/2" x 1" hole

C&K paddle toggle switch with red LED in bezel. 0.4 VA max. On-On. PC mount. Fits 1/2" x 1" hole. Used-removed from new equipment.

(SWT) MS27722-27

SPDT
101TL1-7
DC: 77+

Microswitch toggle switch. SPDT. Momentary - center OFF. 101TL1-7. DC: 77+.

(SWT) 40C-MOM

0.709" mount holes on face
0.429" x 0.954" x 0.606"
0.4" x 0.788" mounting centers posts

Alps DP3T toggle switch. Momentary - maintained - momentary. Brushed aluminum bat. 0.709" mount holes on face. 0.4" x 0.788" mounting centers posts. 0.429" x 0.954" x 0.606".

(SWT) CST-023TA

0.709" mounting centers on faceplate
0.4" x 0.788" mounting centers on corner posts
0.432" x 0.901" x 0.581"

Alco DP3T toggle switch. Momentary - maintained - momentary. Brushed aluminum toggle. 0.709" mounting centers on faceplate. 0.4" x 0.788" mounting centers on corner posts. 0.432" x 0.901" x 0.581".

(SWT) 2TL1-6F

TL series toggle switch
DPST
Manufactured by Honeywell

Honeywell 2TL1-6F, MS24659-30F (Mil-spec) microswitch TL series toggle switch. DPST, 2 pole, 2 position (on-off). Screw terminal, locking lever (F), locked in extreme position (opposite keyway). NSN: 5930-00-080-3030.

(SWZ) MS25224-3

Spring loaded
Alt. P/N: NSN: 5930-00-617-9718

Toggle switch guard. Spring loaded. Cover locks up / down. Molded red cover, steel bracket (black). Switch not included. 1.812"L x 1.125"H x 0.75"W. 0.48" unthreaded mounting hole. NSN: 5930-00-617-9718.

(SWT) J-U4240

DPDT
5 amp @ 125v
3 amp @ 250v

SMK toggle switch. Center off. ON (momentary) - OFF - ON (momentary). 5 amp @ 125v, 3 amp @ 250v. 1/2" x 1/2" x 5/8" behind panel, 3/8"L bat. CSA. Made in Japan.

(SWT) J-U8052

DPDT
5 amp @ 125v
3 amp @ 250v

SMK toggle switch. Center off. ON (maintained) - OFF - ON (maintained). 5 amp @ 125v, 3 amp @ 250v. 1/2" x 1/2" x 5/8" behind panel, 3/8"L bat. CSA. Made in Japan.

(SWT) TS-4

New
DPDT
6 amp @ 125v AC / DPDT

DPDT toggle switch. ON - OFF - ON. 6 amp @ 125v AC. Screw terminals. 1-3/8"H x 3/4"W x 1-1/4" behind panel depth. Faceplate has peel-off protective covering. New. Made in Japan.

(SWT) J-0518

On - On
0.191" terminal centers
Flat bat measures 0.1" x 0.2" x 0.51"L

JBT toggle switch. SPDT. Momentary. On - On. Right angle, PC mount. Flat bat measures 0.1" x 0.2" x 0.51"L. 0.191" terminal centers.

(SWT) STM-1

On - On
Fits 0.25" hole
053" behind panel depth

RTC toggle switch. DPDT. On - On. 5 amp @ 125v, 2 amp @ 250v. Bat measures 0.121"D x 0.43"L. 053" behind panel depth. Fits 0.25" hole.

(SWT) 15-323

On - On
Requries 0.475" diameter hole
Bat measures 0.256"D x 0.65"L

JBT toggle switch. 3PDT. On - On. 5 amp @ 125v. Double nuts, trim nut, lock washer. Solder eyelets. Bat measures 0.256"D x 0.65"L. Requries 0.475" diameter hole.

(SWT) 90

DPDT
10 amp @ 125v
Requires 6mm mounting hole

Miniature toggle switch. DPDT, On - Off - On. 10 amp @ 125v. Green bat. 12mm x 12mm. Requires 6mm mounting hole. Made in Japan.

(SWT) MST205SA

DPDT
5 amp @ 115v AC
1.375" overall length

Alcoswitch momentary toggle switch. Momentary - Off - Momentary. (Center off). DPDT, 5 amp, 115v AC. 0.45" x 0.49" body, 0.675" behind panel depth. Fits 1/4" hole. Solder eyelet. 1.375" overall length. Includes hardware. Made in 1979 when quality mattered!

(SWT) MS25068-1

4PDT / 20 amp @ 115v AC
1.33" x 1.44" x 1.25" behind panel depth
Fits 0.47" hole

Cuttler Hammer toggle switch. On - None - On Maintained. 4PDT. 20 amp @ 115v AC. Fits 0.47" hole. 1.33" x 1.44" x 1.25" behind panel depth. Screw terminals. Screws included with lever seal. Alt. P/N: 7662K5.

(SWT) 7691K14

4PST / 10 amp @ 250v AC / 15 amp @ 125v AC
0.465" neck
1.33" x 1.44" x 1.25" behind panel depth

Cuttler Hammer toggle switch. 4PST. 10 amp @ 250v AC, 15 amp @ 125v AC. 0.465" neck. 1.33" x 1.44" x 1.25" behind panel depth.

(SWT) 0140-3004

3PDT / 6 amp @ 600v / 17 amp @ 277v
1/4" spade terminals
Mounts in 0.47" hole

McGill toggle switch. On - On. 3PDT, 6 amp @ 600v, 17 amp @ 277v. Mounts in 0.47" hole. 1/4" spade terminals.

(SWT) 0140-3017

3PDT / 6 amp @ 600v AC / 17 amp @ 125 - 277v AC
1.32" x 1.45" x 1.32" behind panel depth
Manufactured by McGill

McGill momentary toggle switch. Momentary - Off - Momentary. 6 amp @ 600v AC, 17 amp @ 125 - 277v AC. Solder eyelets. 1.32" x 1.45" x 1.32" behind panel depth.

(SWT) 111-1623

3 amp @ 125v / 6 amp @ 250v
4"L
5" long leads

Carling toggle switch. SPST. 3 amp @ 125v, 6 amp @ 250v. Short bat, 4"L, 0.244"D ball. Fits 0.470" hole. 5" long leads.

(SWT) 7101WB

5 amp @ 120v / 2 amp @ 250v
White bat measures 0.593"W
1.36" mounting center

C&K large white bat toggle switch. PC mount. 5 amp @ 120v, 2 amp @ 250v. White bat measures 0.593"W, 1.37"H above frame. 1.36" mounting center. Includes stand-offs and mounting hardware.

(SWT) CHBB-DT

10 amp @ 250v AC
15 amp @ 125v AC
DPDT

C&H toggle switch. DPDT. On - Off - On. 10 amp @ 250v AC, 15 amp @ 125v AC. Flat, black bat measures 0.36"W x 0.63"L. CSA.

(SWT) 4TL143-3G

4PDT
20 amp
15/32" bushing

Microswitch Corp. locking lever switch. 4PDT, 20 amp. Toggle locked in one direction, maintained in other direction. Pull to unlock lever. 3/4" metal hex knob, removable. Silver cadmium oxide contacts. 15/32" bushing. Screw terminals. Environmental proof seal. UL CSA.

(SWT) AN3027-6

DPDT
18 amp @ 115v AC
10 amp @ 28v DC

Microswitch toggle switch. On - Momentary. DPDT. 18 amp @ 115v AC, 10 amp @ 28v DC. Screw terminals. 1.32"L x 0.745"W. 0.47"L bushing. Alt. P/Ns: 12TS1-8. ST5OR.

(SWT) 7547K36

New, old stock
SPDT / 20 amp @ 250v Toggle
16.5mm actuator length

Eaton toggle switch. Center off. SPDT. 20 amp @ 250v toggle. 20 amp @ 125v AC, 10 amp @ 250v AC. 0.75 HP / 250v AC. Requires 1/2" mounting hole. Round lever. 16.5mm actuator length. 0.68" screw terminals. Alt. P/N: 12862. New, old stock. Circa 1990.

(SWT) MS-500A

6 amp @ 125v / SPDT
0.57" behind panel depth
0.307" x 0.508" body

Miyama toggle switch. On - On. SPDT, 6 amp @ 125v. 0.232" bushing. 0.307" x 0.508" body, 0.57" behind panel depth. Solder eyes. Includes 2 nuts, star washer & keylock washer. CSA. Made in Japan.

(SWT) J-U8004

6 amp @ 125v AC / 3 amp @ 250v AC / SPDT
0.322" x 0.512" x 0.58" behind panel depth
Fits 1/4" hole

SMK momentary toggle switch. Momentary - Off - momentary. Center off. SPDT. 6 amp @ 125v AC, 3 amp @ 250v AC. Fits 1/4" hole. 0.322" x 0.512" x 0.58" behind panel depth. Eyelet terminals. Includes 2 nuts, star & key washers. CSA UL. Made in Japan.

(SWT) J-U4230

6 amp @ 125v AC / 3 amp @ 250v AC / DPDT
Fits 1/4" hole
0.422"L bat

SMK toggle switch. On (maintained) - Off - Momentary. Center off. DPDT. 6 amp @ 125v AC, 3 amp @ 250v AC. Fits 1/4" hole. 0.510" x 0.532" x 0.58" behind panel depth. 0.422"L bat. Eyelet terminals. Includes 2 nuts, star & key washers. UL.

(SWT) 571-2621-0601-011

DPDT
0.5" x 0.459" body
Bat measures 0.177" x 0.1" x 0.45" above bushing

Dialight toggle switch. Off - On - Momentary. DPDT. Center is on, right is momentary on, left is blocked. 0.5" x 0.459" body. Bat measures 0.177" x 0.1" x 0.45" above bushing.

(SWT) 571-3182-1001-061

3 amp @ 125v / 3PDT
0.678" behind panel depth
0.497" x 0.650" body

Dialight toggle switch. On - On. 3PDT. 3 amp @ 125v. Bushing or PC mount. Long bat, mini toggle. 0.245" bushing, 0.33"L. Long tapered bat measures: 0.1" - 0.131"D, 0.64" long. 0.497" x 0.650" body. 0.678" behind panel depth. Includes 2 nuts, star & keylock washers.

(SWT) 180480-002A

4PDT / 15 amp
1.28" behind panel depth
1.33" x 1.43" body

JBT toggle switch. 4PDT. On - Off - Momentary. Maintained one direction, momentary in the other direction. Center off. 15 amp silver contacts. 0.465"D x 0.470"L bushing. 1.33" x 1.43" body. 1.28" behind panel depth. Over sized black bat, 0.375"D x 0.87"L. Over sized solder eye terminals 0.125" inside diameter. NSN: 5930-00-480-9407.

(SWT) TT11DG-PC-9T-1/4

SPDT / 0.4 va
0.42"L bat
0.32" body height

Alco sub-mini toggle switch. On - On. 0.4 va contacts. 0.202" x 0.323". 1.2" overall length, 0.32" body height. 0.42"L bat. Made in the USA.

(SWT) LT-2561-701-012-XAS2

DPDT / 10 amp @ 250v AC / 15 amp @ 125v AC
Manufactured by Carling

Carling LT-Series illuminated toggle switch. On - Off - On. DPDT. 10 amp @ 250v AC, 15 amp @ 125v AC. 3/4 HP. 15 amp @ 15 - 28v DC. Black molded actuator, red light in position one, no light position three. 12v lamp. Quick connect, 0.250. 1.09" x 1.37" x 1.3" behind panel depth. 0.462"D bushing. 1/4" spade terminals.

(SWT) 8909K532

DPST Normally Closed / 10 amp
1-13/16" mounting centers
2-1/8"L x 3/4" mounting plate

Cutler-Hammer momentary lever switch. DPST, normally closed, momentary open. 10 amp. Bakelite base. Roller lever. Strong pull - snap to open. 1-3/8"H (not including lever), 2-1/8" overall height. 2-1/8"L x 3/4" mounting plate. 1-13/16" mounting centers.

(SWT) GE283-73

DPDT
10 amp @ 250v AC
15 amp @ 125v AC

Carling toggle switch. DPDT. 10 amp @ 250v AC, 15 amp @ 125v AC. Center off. Fits 7/16" hole. NOTE: This switch is bridged. See photo.

(SWT) KS21776-4281

Mini-switch mounted on frame with terminal screws
DPDT
1-1/4" x 3" x 7/8"D

Western Electric switch terminal. DPDT, On-Off-Maintained. Mini-switch mounted on frame with terminal screws. 1-1/4" x 3" x 7/8"D.

(SWT) MS-500F

6 amp @ 125v
DPDT
0.495" x 0.510" body

Miyama toggle switch. 6 amp @ 125v. On - On. CSA listed. Includes nuts, washer, solder eyes. 0.495" x 0.510" body, 0.620" behind panel depth. Made in Japan.

(SWT) KNM10

6 amp @ 125v / 3 amp @ 250v / DPDT
0.459" x 0.495" body
0.577" behind panel depth

DPDT toggle switch. 6 amp @ 125v, 3 amp @ 250v. Solder eye. Includes nuts & washers. 0.459" x 0.495" body, 0.577" behind panel depth. Fits 1/4" hole.

(SWT) 452-1020

10 amp @ 250v AC / 15 amp @ 125v AC
SP3T
1-1/4" x 5/8" x 1-1/8" behind panel depth

Carling SP3T toggle switch. 10 amp @ 250v AC, 15 amp @ 125v AC. 1-1/4" x 5/8" x 1-1/8" behind panel depth.

(SWT) CARLING

6 amp @ 125v / SPDT
Fits 0.47" - 0.5" hole
0.980" behind panel depth

Carling toggle switch. SPDT, center off. On - Off - On. 6 amp @ 125v. 1.137" x 0.635". 0.980" behind panel depth. Fits 0.47" - 0.5" hole. 0.655"L bat. UL listed. Alt. P/N: 2Fe63-73. 0550HEX.

(SWT) 82636

4PDT / 10 amp @ 250v AC
Mounts in 7/16" hole
1-3/8" x 1-5/16"

Arrow Hart toggle switch. 4PDT. 10 amp @ 250v AC. On - On - Maintained. 1-3/8" x 1-5/16". Mounts in 7/16" hole.

(SWT) 6430

DPDT
1-5/8"W x 5/8" deep body
1/8"D

GMSC toggle switch. DPDT. Sealed bat and O-ring. Fits 15/32" hole. 11/16"L bat, 1/8"D. 1-5/8"W x 5/8" deep body.

(SWT) R-1321

15 amp @ 250v
5/8"L bat
1-1/4" behind panel depth

Realness toggle switch. DPDT. 15 amp @ 250v. "QC" spade or solder terninals. Fits 7/16" hole. 3/4" x 1-1/4" body. 1-1/4" behind panel depth. 5/8"L bat.

(SWT) ARCO

DPDT / Momenary - Off - Momentary
0.425"W x 1.05"L bat
1" x 1-5/8" body

Arcolectric momentary toggle switch. DPDT. Momentary - Off - Momentary. 16 amp @ 250v. 1" x 1-5/8" body. 0.425"W x 1.05"L bat. 1/4" spade or solder terminals. 1-1/4" behind panel depth. Made in England.

(SWT) FP

1-3/16" x 7/8"
7/16"D hole

Toggle aluminum faceplate for double throw switch. 7/16"D hole. 1-3/16" x 7/8".

(SWT) 7301MD9ABE

5 amp @ 20v / 3PDT / On/On
Right angle, PC mount
Manufactured by C&K

C&K toggle switch. Right angle, PC mount. 5 amp @ 20v. 3PDT. On / On.

(SWT) KN3A-101MP

20 amp @ 125v / 15 amp @ 250v
1/4" spades or solder
Fits 0.47"D hole

Toggle switch. SPST. On - Off. 20 amp @ 125v, 15 amp @ 250v. Fits 0.47"D hole. 1/4" spades or solder.

(SWT) KN3C202

15 amp @ 250v
1/4" spades or solder
1-1/4" behind panel depth

Daier toggle switch. 15 amp, 250v. On - On. DPDT. Fits 0.47"D hole. 3/4" x 1-1/4". 1-1/4" behind panel depth. 1/4" spades or solder.

(SWZ) TSG-G

Green
With flip guard
3/8" - 7/16" bushing

Toggle switch with flip guard. Green. Covers the toggle bat until the user needs to engage at which time the cover is flipped up and the switch is engaged. 3/8" - 7/16" bushing.

(SWZ) TSG-Y

Yellow
With flip guard
3/8" - 7/16" bushing

Toggle switch with flip guard. Yellow. Covers the toggle bat until the user needs to engage at which time the cover is flipped up and the switch is engaged. 3/8" - 7/16" bushing.

(SWZ) TSG-B

Blue
With flip guard
3/8" - 7/16" bushing

Toggle switch with flip guard. Blue. Covers the toggle bat until the user needs to engage at which time the cover is flipped up and the switch is engaged. 3/8" - 7/16" bushing.

(SWT) 100A

2 amp @ 250v / 4 amp @ 125v / SPDT
Right angle, PC mount
1/4"L bat

Taiway toggle switch. On - Off - On. 2 amp @ 250v / 4 amp @ 125v. SPDT. Center off. Stubby actuator. Right angle, PC mount. 1/4"L bat.

(SWT) AML20

2 amp @ 250v / 3 amp @ 125v / SPDT
2.28" overall length
Fits 1.15" x 0.75" hole

Micro toggle switch. Momentary - Momentary. Center off. SPDT. 2 amp @ 250v, 3 amp @ 125v. Fits 1.15" x 0.75" hole. 2.28" overall length.

(SWT) 8906K968

10 amp / 4PST
1-3/8" behind panel depth
1-1/4" x 1-3/8"

C&H toggle switch. 10 amp, 4PST. Screw terminals. 0.47"D bushing. 1-1/4" x 1-3/8", 1-3/8" behind panel depth.

(SWT) WUHAN

2 amp
Giant 1-5/8"L bat!
250v

Arco toggle switch. Giant 1-5/8"L bat! 250v. Silver 1/4" "QC" spade terminals. Fits 1/2"D hole.

(SWT) Z21A

15 amp @ 250v AC
7/16" bushing
0.43"W x 1.04"L bat

Noel (Austria) toggle switch. 250v AC, 15 amp. On / off. 7/16" bushing. 0.43"W x 1.04"L bat.

(SWT) TAI3PDT

2 amp @ 250v AC / 5 amp @ 120v AC / 3PDT
0.33"L bushing
Fits 1/4"D hole

Taiway toggle switch. 2 amp @ 250v AC, 5 amp @ 120v AC, 3PDT. Center off. Fits 1/4"D hole, 0.33"L bushing.

(SWT) CARLING4P

15 amp @ 125v AC / 4PDT
Fits 0.47"D hole
1-7/16" x 1-1/4" x 1-3/16" behind panel depth

Carling toggle switch. On / Off / On. Center off. 15 amp, 125v AC, 4PDT. Threaded terminal holes. No screws. 1-7/16" x 1-1/4" x 1-3/16" behind panel depth. Fits 0.47"D hole.

(SWT) 7105

2 amp @ 250v / 5 amp @ 125v / SPDT
Fits 1/4" mounting hole
1/4" x 1/2" body

C&K toggle switch. 2 amp @ 250v. 5 amp @ 125v. SPDT. Locking center off momentary both ways. Momentary - Lock Off - Momentary. Eyelet terminals. 1-1/2" overall length. 1/4" x 1/2" body. Fits 1/4" mounting hole.

(SWT) 7101H

5 amp @ 120v AC / SPDT
Fits 1/4"D hole
0.56" behind panel depth

C&K toggle switch. 5 amp @ 120v AC. Solder eyelets. 1.27" overall length. 0.56" behind panel depth. Fits 1/4"D hole.

(SWT) FB6A

6 amp @ 125v AC / 3 amp @ 250v AC / DPDT
1/2" x 7/16
Fits 1/4"D hole CSA

Toggle switch. Flat bat. On - On. 6 amp @ 125v AC, 3 amp @ 250v AC. 1/2" x 7/16". Fits 1/4"D hole CSA.

(SWT) MS-500A-FB

6 amp @ 125v / SPDT
0.307" x 0.508" x 0.57" behind panel depth
0.232" bushing

Miyama toggle switch. 6 amp @ 125v, SPDT. On - On. Flat, black bat. Solder eyelets. 0.232" bushing. 0.307" x 0.508" x 0.57" behind panel depth. Made in Japan.

(SWT) SBT-DPDT

2 amp @ 250v / 5 amp @ 120v AC / DPDT
0.56" behind panel depth up to 0.22" thick panel
5 amp @ 120v AC. 0.23"H bat

Short bat toggle switch. On - On. DPDT. 2 amp @ 250v, 5 amp @ 120v AC. 0.23"H bat. 0.56" behind panel depth up to 0.22" thick panel.

(SWT) E101MF1

3 amp @ 250v 6 amp @ 125v / SPDT
Requires 1/4" hole mount
3 amp @ 250v, 6 amp @ 125v

C&K toggle switch. On - None - On. SPDT. 3 amp @ 250v, 6 amp @ 125v. Requires 1/4" hole mount. 3/8"L bat.

(SWT) 2NT1-3

15 amp @ 125v / 277v / DPDT
Requires 0.47"D hole
1-5/16" x 7/8" x 1-3/8" behind panel depth

Honeywell / Micro Switch toggle switch. On - On. DPDT. 15 amp @ 125v / 277v. Dust tight, waterproof. Requires 0.47"D hole. 1-5/16" x 7/8" x 1-3/8" behind panel depth. In factory bags.

(SWT) 7105FB

0.4 va
SPDT
Manufactured by C&K

C&K fat bat toggle switch. SPDT, 0.4 va. Momentary - Off - Momentary.

(SWT) 452-BOX

6 amp @ 125v
3 amp @ 250v
18 AWG, 6" wire leads

Eagle on / off toggle switch with leads. SPST box switch. Ball type toggle bat. 6 amp @ 125v, 3 amp @ 250v. 18 AWG, 6" wire leads. UL listed. Made in the USA.

(SWT) 7631K36

10 amp @ 250v
20 amp @ 125v
1.31" x 0.747"

C&H toggle switch. DPDT. Center off. 10 amp @ 250v, 20 amp @ 125v. On - Off - On. Screw terminals. Fits 0.47" hole. 1.31" x 0.747". 1.09" behind panel depth.

(SWT) KNX-1

3 amp @ 250v
6 amp @ 125v
SPDT

Mini toggle switch. On - On. SPDT. 3 amp @ 250v, 6 amp @ 125v. Red bat. Fits 7/32" (6mm) hole. 15/32"W.

(SWT) 6GC5B-NBL3

250v AC @ 10 amp
125v AC @ 15 amp
0.687" toggle length

Carling "G Series" heavy duty AC toggle switch. 250v AC @ 10 amp, 125v AC @ 15 amp. 3/4 HP, 125 - 250v AC on - off. SPST. Black paddle / bat with black ebanol plated bushing, threaded. 2 - 1/4" "QC" tab terminals. 0.687" toggle length. 0.465" bushing length.

(SWZ) 8504K10

2PST
115v AC
28v DC

Cuttler Hammer locking bat toggle switch. On / Off. 2PST. 115v AC / 28v DC. 0.90"L bat, extends 1.5" from base. 1.18"L x 0.90"W x 1.20" depth. Made in the USA. DC: 1975.

(SWT) AN3023-2

DPST
New! Never used "Old Stock"
Holes at 1.82" centers

Cutler Hammer H.D. toggle switch. DPST. Fits aircraft including Piper, Warbird. Mounts by threaded plate. Holes at 1.82" centers. 1.27" behind panel depth. New! Never used "Old Stock".

(SWT) 5741

15 amp @ 125v AC
10 amp @ 250v AC
DPST

Leviton appliance switch. 15 amp @ 125v AC, 10 amp @ 250v AC. DPST. 3/4 HP @ 120v AC / 240v AC. Screw terminals. Easy feel. 0.74" x 1.33", 1.13" behind panel depth. Fits 0.47" hole. Made in the USA.

(SWT) TG21000

20 amp
10 amp @ 12v DC
SPST

Toggle switch. 20 amp, SPST. 10 amp @ 125v DC. 3/8" bushing. Spread terminals.

(SWT) 7101-P1YWG

2 amp @ 250v AC
5 amp @ 120v AC
0.350"H bushing

C&K miniature toggle switch. On - None - On. 2 amp @ 250v AC, 5 amp @ 120v AC. Flatted actuator, 0.840"H, anti-rotation. 0.350"H bushing, keyway, nickel. 3 gold over silver terminals, 0.750"L. NOS.

(SWT) LTA

5 amp @ 250v AC
10 amp @ 125v AC
5 amp 125v ACL

Carling illuminated snap-in toggle switch. LTA Series. Off - On. 5 amp @ 250v AC, 10 amp @ 125v AC, 5 amp 125v ACL. 3 terminal, single pole angled rocker. Tungsten filament lamp. 0.55" x 1.125" mounting hole dimensions.

(SWT) 7063K20

5 amp @ 28v DC
5 amp @ 125v AC
DPDT

Cutler-Hammer toggle switch. On - Off. DPDT. 5 amp @ 28v DC, 5 amp @ 125v AC. 6 solder tabs. 0.30" bushing. 0.36" round bat. 1.18" total height. 0.48" x 0.46" square body. NOS. Made in the USA.

(SWT) 83053

2PST
3 amp @ 125v AC
1 amp @ 250v DC

Arrow Hart toggle switch. 2PST, On / Off. 3 amp @ 125v AC, 1 amp @ 250v DC. 4 solder lug tabs. 2"H x 5/8"W. 3/4"L bat, 1/4"D at top. 0.5" bushing. DC: 8021.

(SWT) 1TW1-2

1PST
5 amp @ 125v AC
2 amp @ 28v DC

Microswitch toggle switch. 1PST, 5 amp @ 125v AC, 2 amp @ 28v DC. Bushing mount, panel. Round actuator, 0.44"L. On / Off, Up - maintained. Down - maintained. 2 turret terminals. 0.57"L x 0.34"W. NOS. DC: 8532.

(SWT) CTS6

2PDT
5 amp @ 29v DC
5/8" behind panel depth

Arrow Hart mini toggle switch. 2PDT. Bushing mount. On / Off - both positions maintained. 5 amp @ 29v DC, 2 amp @ 250v AC. 6 tab solder lug. Round actuator: 0.105"D top, 0.40"L. Body: 1-3/8"H x 1/2"W. 5/8" behind panel depth. Made in England. NOS. Mil-spec.

(SWT) AN3023-6

2P2T
6 screw terminals
1.25" behind panel depth

Cutler Hammer toggle switch. On - Off - On momentary. Heavy duty enclosure. 115v AC, 28v DC, 30 amp DC, 20 amp AC. Round actuator bat, 0.24"D x 0.875"L. 2.125"L x 1.515"W x 1.343"H. 2 mounting holes, 1.812" c-c. Panel mount, 1.25" behind panel depth. 6 screw terminals. For Beechcraft, etc. NOS.

(SWT) FP2

0.235" diameter center hole
5/8" tall x 1/2"W

On-Off-On-Off stamped aluminum faceplate. 5/8" tall x 1/2"W. 0.235" diameter center hole. NOS.

(SWT) 570-11

2 amp @ 250v AC
5 amp @ 125v AC
1.25" total height not including terminals

Dialight On - On toggle switch. 2 amp @ 250v AC, 5 amp @ 125v AC. 3 straight terminals. PCB through-hole 3/4"L. Panel mount. Hardware included. 0.50" bat. 1/2"L x 1/4"W body. 1.25" total height not including terminals. NOS. New in packaging.

(SWT) SF2SCY191

10 amp @ 125v AC/ DPDT
0.68" behind panel depth
0.475" x 0.515"

>C-H toggle switch. DPDT. 10 amp @ 125v AC. On - On. 0.475" x 0.515". 0.68" behind panel depth. 1/4"D hole required. Includes hardware.

(SWT) PIL-DPDT

3 amp @ 250v
6 amp @ 125v AC
DPDT

Pilot toggle switch. DPDT. 3 amp @ 250v, 6 amp @ 125v AC. 0.515" x 0.505". 0.525" behind panel depth.

(SWT) AN3027-8

15 amp / DPDT
0.46"D bushing
1-1/4" behind panel depth

C-H toggle switch. DPDT. 15 amp. On - Off - Momentary. Center off. Screw terminals. 1-5/16" x 3/4". 1-1/4" behind panel depth. 0.46"D bushing. Includes hardware. Made in the USA.

(SWT) SM-SPDT-R

2 amp @ 250v
6 amp @ 125v
SPDT

SH toggle switch. SPDT. 2 amp @ 250v, 6 amp @ 125v. Center off. Red. 0.275" x 0.5". 0.5" behind panel depth.

(SWT) SH-SPDT

2 amp @ 250v
5 amp @ 125v
SPDT

SH toggle switch. SPDT. 2 amp @ 250v, 5 amp @ 125v. Center off. Black. 0.275" x 0.5". 0.5" behind panel depth. 0.4"L bat. 0.245" bushing.

(SWT) 7207-SPYZ

DPDT
28v DC
5 amp @ 120v AC

C&K toggle switch. On - Off - On (momentary). DPDT, 5 amp @ 120v AC, 28v DC. 6 solder terminals. Panel mount. 0.49"L x 0.45"W. 0.42"L actuator, 0.35"H bushing. Made in the USA.

(SWT) 12TS115-50

10 amp @ 125, 250, 277v AC
0.70"L x 0.23"D max bat
1.03" behind bushing depth

Microswitch toggle switch. On - On - On (momentary). 10 amp @ 125, 250, 277v AC, 1/2 HP. 1/4 HP @ 125v AC. 3 amp, 125v AC "L". Panel bushing mount. Includes hardware. 6 terminals. 1.32"L x 0.75"W. 1.03" behind bushing depth. 0.70"L x 0.23"D max bat. NOS. DC: 8923. Made in the USA.

(SWT) STM-4

DPDT
3 amp @ 125v
0.31" x 0.35"L

RTC mini toggle switch. On / On. DPDT, 3 amp @ 125v. Panel mount. Includes hardware. 6 solder terminals. 0.31" x 0.35"L, 1/2" behind panel depth. 0.41"L x 0.094"D actuator.

(SWT) STM-2

3 amp @ 250v
6 amp @ 125v
0.22" diameter bushing

RTC mini toggle switch. On / On. Panel mount. 6 amp @ 125v, 3 amp @ 250v. 3 solder terminals. 0.49"L x 0.26"W, 1.27" total length. 0.54" behind panel depth. 0.39"L actuator, 0.09" diameter. 0.22" diameter bushing.

(SWT) 11TL1-3

3 amp @ 28v DC, 3 amp @ 115v AC
2.5" Total L x 1-1/8" W x 0.93" H
1P2T

Microswitch toggle switch. 1P2T. Bushing mount w/ inner seal. On / On - both positions maintained. 3 amp @ 28v DC, 3 amp @ 115v AC. 3 turret terminal. 2.5" Total L x 1-1/8" W x 0.93" H. Milspec P/N: MS27734-23. NSN: 5930-01-012-3912. NOS.

(SWT) 111-16-73

0.687" L toggle bat
0.46" bushing DIA x 1/2" HT
2-6" leads

Carling On-Off toggle switch. SPST. 3 amp @ 250v, 6 amp @ 125v. 2-6" leads, bushing mount w/ keyway. 0.46" bushing DIA x 1/2" HT. 0.687" L toggle bat. Heavy duty housing, phenolic 6-8lb switch actuation force. Body - 1" L x 1/2" W x 1/2" HT. Carling, Made in Mexico. NOS.

(SWT) 4TL1-2

1.63" L x 1.31" W x 1.20" H
115v AC/28v DC
4 pole

Microswitch 4PST toggle switch. 4 pole, single throw maintained. 115v AC/28v DC. 0.46" H threaded bushing with keyway. 0.65" L bat, 8 screw terminals. 1.63" L x 1.31" W x 1.20" H. Alt P/N: MS24525-22. NSN: 5930-00-660-3953. Made in USA. NOS.

(SWT) MS35058-22

NOS
Made in USA
SPST

Vintage Kulka aircraft toggle switch. SPST, On/Off, 2 screw terminals. Alt P/N: AN3021-2. NSN: 5930-01-562-9062. Made in USA. NOS.

(SWT) A220T01

5 amps - 28v DC
5 amps - 120v AC
2 amps - 250v AC

Canal Components Mini-Toggle switch. On-Off-On, 2P2T, standard terminals, silver plated. 2 amps - 250v AC, 5 amps - 120v AC, 5 amps - 28v DC. Taiwan.

(SWT) ST42A

0.50" bushing DIA x 0.46" bushing L
0.67" L x 0.23" DIA BAT
1.12" L x 0.61" W x 2.08" total HT

Vintage JBT aircraft power toggle switch. On-Off, 15 amps - 125v, bushing mount. 1.12" L x 0.61" W x 2.08" total HT. 0.67" L x 0.23" DIA BAT. 0.50" bushing DIA x 0.46" bushing L. Made in USA. NOS.

(SWT) AH-SP-MOM

Center off
125v
15 amp

A - H toggle switch SPDT. Fits 7/16" hole. 15 amp, 125v. Momentary - off - momentary. Center off. UL listed. Solder eyes.

(SWT) 8856K34

Momentary - off - pull momentary
2 1/8" O.A. length
Fits 7/16" hole also MS21027-H341

CH Eaton locking toggle switch. DPDT center off. Fits 7/16" hole also MS21027-H341. 2 1/8" O.A. length. Locking bat @ center. Momentary - off - pull momentary.

(SWT) 8906K3474

Locks in 2 positions
2 1/8" overall length
Fits 7/16" hole

Eaton / Cutler Hammer locking toggle DPDT. Fits 7/16" hole. 2 1/8" overall length. Locks in 2 positions. 7/8" behind panel depth.

(SWT) MS24523-22

15 amp
Sealed toggle-water resistant
1.165" behind

Toggle switch mfg micro switch. Reg 1/2" panel opening. 1.133" x .623". 1 TL 1-2. 1.165" behind. Sealed toggle-water resistant. 5 PST. 87+. 15 amp.

(CNE) 308AST

26 piece assortment
Manufactured by Cinch Jones

Cinch Jones 26 piece assortment of Cinch 308 plugs, sockets and hoods. Includes:

• 11 Plugs
• 10 Sockets
• 5 Hoods

(SWT) 10076072

SPDT, 3A 125v
7/8" behind panel depth
7/16" mounting hole

Eaton / Cutler Hammer toggle. SPDT, 3A 125v. 7/16" mounting hole. 7/8" behind panel depth.

(SWT) MCG3P

3/8" x 1/2"L bushing
0.56"L bat
2 HP @ 200 - 600v AC

McGill toggle switch. 3PDT. 6 amp @ 600v AC, 2 HP @ 200 - 600v AC. On - On. 1-2-3 phase. 1.33" x 1.46". 1.35" behind panel depth. 0.56"L bat. 3/8" x 1/2"L bushing. 1/4" "QC" spade terminals.

(SWZ) MX25224-3

Switch not included
0.48" unthreaded mounting hole
1.812"L x 1.125"H x 0.75"W

Toggle switch guard. Spring loaded. Cover locks up / down. Molded red cover, steel bracket (black). Switch not included. 1.812"L x 1.125"H x 0.75"W. 0.48" unthreaded mounting hole. NSN: 5930-00-617-9718.

(SWT) AH-3PDTW

15 amp @ 125v
1 3/8"W x 1 7/16"L x 1" behind wider body than tall
Manufactured by AH & H

AH & H 3PDT toggle switch. 1 3/8"W x 1 7/16"L x 1" behind wider body than tall. 15 amp @ 125v. Solder eyes.