3 Volt to 12 Volt Power Supplies

(PS) 5691286-12

Weight: 80 lbs
Dimensions: 19" x 6" x 23" deep
Output: 0 to 3.6 vdc @ 100 amps = 360 watts

Elgar programmable DC power system. Heavy duty 5 foot cord with twist plug. Rack mountable. As new condition.

• Input: 230v @ 7.5 amps, 50/60 Hz
• Output: 0 to 3.6 vdc @ 100 amps = 360 watts
• Dimensions: 19" x 6" x 23" deep
• Weight: 80 lbs

(PS) HB5-3/OVP

Dimensions: 4" x 4-7/8" x 1-15/16"
Output: 5 vdc @ 3 amps
Input: 115 / 230 vac @ 47 / 440 Hz

PowerOne open frame power supply.

• Input: 115 / 230 vac @ 47 / 440 Hz
• Output: 5 vdc @ 3 amps
• Dimensions: 4" x 4-7/8" x 1-15/16"

(PS) MTAA-16W-A

Dimensions: 4-1/4" x 6-1/2" x 2"
Output: 5v @ 2 amps with OVP @ 6.2v, ±9 - 15v @ 0.4 amps
Input: 100 / 120 / 215 / 230 / 240v

Condor DC power supply. Removed from new, unused equipment.

• Input: 100 / 120 / 215 / 230 / 240v
• Output: 5v @ 2 amps with OVP @ 6.2v, ±9 - 15v @ 0.4 amps
• Dimensions: 4-1/4" x 6-1/2" x 2"

(PS) 6433

Dimensions: 4-7/8" x 3-1/4"H x 7"L
Output: +5v DC @ 3 amps, +12v DC @ 3 amps (6 amps peak) 60 watt
Input: 100/115/215/230v

Xentek (or equivalent) linear power supply. 100/115/215/230v input. 47-440 Hz. +5v DC @ 3 amps, +12v DC @ 3 amps (6 amps peak). 60 watts. Used.

• Input: 100/115/215/230v
• Output: +5v DC @ 3 amps, +12v DC @ 3 amps (6 amps peak) 60 watt
• Dimensions: 4-7/8" x 3-1/4"H x 7"L

(PS) DSP10-5

Dimensions: 3-1/2"H x 7/16"W x 2-3/16" deep
Output: 5v DC, 7.5 watt at 1.5 amps
Input: 100-240v

TDK-Lambda power supply. New in box with din rail mount manual.

• Input: 100-240v
• Output: 5v DC, 7.5 watt at 1.5 amps
• Dimensions: 3-1/2"H x 7/16"W x 2-3/16" deep

(PS) DSP30-5

5v DC
Dimensions: 3-1/2"H x 2-1/8"W x 2-3/16" deep
Output: 5v DC, 15 watt

TDK-Lambda power supply. New in box with din rail mount manual.

• Input: 100-240v
• Output: 5v DC, 15 watt
• Dimensions: 3-1/2"H x 2-1/8"W x 2-3/16" deep

(PS) RSB5-OVP-TBC

Dimensions: 5" x 6-1/2" x 3-1/2"H
Output: 5 vdc ± 0.5v, 6 amps
Input: 105 - 132 vac

NJE power supply. Adjustable over-voltage protection. Remote programming, remote sensing. Mil-spec. Includes manual. NSN: 6130-01-111-2232.

• Input: 105 - 132 vac
• Output: 5 vdc ± 0.5v, 6 amps
• Dimensions: 5" x 6-1/2" x 3-1/2"H

(PS) CX70-9013

Dimensions: 5-1/8" x 12 x 1-3/4"H
3 Voltages: 5v @ 10 amps, 14.5v @ 1 amp, -12v @ 0.5 amps
Manufactured by Summit / Basler

Summit / Basler switching power supply. NEW!! 115 vac.

• 3 Voltages: 5v @ 10 amps, 14.5v @ 1 amp, -12v @ 0.5 amps
• Dimensions: 5-1/8" x 12 x 1-3/4"H

(PS) 043966C

Dimensions: 3" x 10" x 1"H
Output: +5v @ 16 amps, +3.3v @ 30 amps
Input: 36 - 60vdc @ 6.5 amps max

Celesta switching power supply. Made in Canada by CSA. New!!

• Input: 36 - 60vdc @ 6.5 amps max
• Output: +5v @ 16 amps, +3.3v @ 30 amps
• Dimensions: 3" x 10" x 1"H

(PS) APS5-18

Dimensions: 5"H x 14"W x 3-1/2" deep
Output: 5v @ 18 amps
Input: 115 / 230v @ 47 - 440 Hz

Adtech linear power supply. Brand new in the box!!

• Input: 115 / 230v @ 47 - 440 Hz
• Output: 5v @ 18 amps
• Dimensions: 5"H x 14"W x 3-1/2" deep

(PS) X1505-Z01

Dimensions: 2-3/8" x 2-3/4" x 4-1/2"
Output: 5v @ 1.5 amps
Input: 127v / 220v

Ecobloc P. Fontaine power supply. Space Lab spare.

• Input: 127v / 220v
• Output: 5v @ 1.5 amps
• Dimensions: 2-3/8" x 2-3/4" x 4-1/2"

(PS) 30-28231-01

5 vdc @ 70 amps
12 vdc @ 20 amps
120v or 240 vac at 10 amps / 5 amps input

Astec Digital Equipment Corp. 556 watt power supply designed for internal equipment placement. 120v or 240 vac at 10 amps / 5 amps input. Brand new, unused. Original cost $3250. Pin-out label.

(PS) 6064662

Output: +5v @ 74.0 amps, +3.3v @ 60 amps, +12v @ 10.0 amps, -12v @ 2.5 amps. Combined, 75 amps total
Input: 120 - 240v, 8 amps - 4 amps, 50/60 Hz
Dimensions: 6" x 13" x 3-1/2"H

C & D Technologies Switching Power Supply. Each power supply comes with individual test data covering: line regulation, load regulation, current share / alarms, power limit, current limit over voltage, holdup and certification of passage of safety tests. Keylock.

• Input: 120 - 240v, 8 amps - 4 amps, 50/60 Hz
• Output: +5v @ 74.0 amps, +3.3v @ 60 amps, +12v @ 10.0 amps, -12v @ 2.5 amps. Combined, 75 amps total
• Dimensions: 6" x 13" x 3-1/2"H

(PS) TM1D-4CBDD

Dimensions: 5"W x 12"L x 3-1/2"H
Outputs: 5v DC @ 74 amps, 3.3 vdc @ 60 amps, 12v DC @ 12 amps, -12v DC @ 3 amps
Input: 36 - 75v DC @ 20 amps

MagneTek 500 watt switching power supply. Brand new! Packed 3 per factory carton.

• Input: 36 - 75 vdc @ 20 amps
• Outputs: 5 vdc @ 74 amps, 3.3 vdc @ 60 amps, 12 vdc @ 12 amps, -12 vdc @ 3 amps
• Dimensions: 5"W x 12"L x 3-1/2"H

(PS) PK11-100K

5 vdc @ 1 amp
115 vac input
2-1/2" x 3-1/2" x 1-3/8" high

Semiconductor Circuits power supply module. 115 vac input. 5 vdc @ 1 amp. 2-1/2" x 3-1/2" x 1-3/8" high. Space Lab spare part.

(PS) QS4D2BCG1

Dimensions: 5" x 4-1/4" x 15"
Output: Main1: +5v @ 80a; Aux2: +12v @ 6a; Aux3: -12v @ 6a; Aux4: -5v @ 6a; Aux5: +12v @ 12a
Input: 115v / 230v / 50/60 Hz @ 10 / 5 amps

Cherokee Int'l power supply / MFN-SCANBE. Appears new. Terminal strips and stud output. Max output: 500 watts.

• Input: 115v / 230v / 50/60 Hz @ 10 / 5 amps
• Output: Main1: +5v @ 80a; Aux2: +12v @ 6a; Aux3: -12v @ 6a; Aux4: -5v @ 6a; Aux5: +12v @ 12a
• Dimensions: 5" x 4-1/4" x 15"

(PS) CP137

Dimensions: 12" x 18-1/2" x 5"H
Outputs: 1850 watts,V1: 5v @ 300 amps, V2: 12v @ 20 ampsV3: 5v @ 10 amps, V4: 12v @ 5 amps
Input: 230 vac

Jeta Model CP137 power supply. No manual, no cords. Not rack mountable. Mfg. P/N: 725-3308-1.

• Input: 230 vac
• Outputs: 1850 watts, V1: 5v @ 300 amps, V2: 12v @ 20 amps V3: 5v @ 10 amps, V4: 12v @ 5 amps
• Dimensions: 12" x 18-1/2" x 5"H

(PS) M-5.1-0.375A

Dimensions: 2-1/2" x 3" x 4-7/8"H
Output: 5.1 vdc @ 0.375 amps
Input: 105 - 125 vac, 50 - 400 Hz

TechniPower power supply. 4 mounting studs. Used, removed.

• Input: 105 - 125 vac, 50 - 400 Hz
• Output: 5.1 vdc @ 0.375 amps
• Dimensions: 2-1/2" x 3" x 4-7/8"H

(PS) 100B7HA

Dimensions: 4"L x 3.25"W x 7.12"H, 7lbs
Output: 7v DC @ 10 amp / 70 watts
Input: 115 / 230v @ 47 / 63 Hz Single Phase

Acme Transformer unregulated linear power supply. 90% efficiency, open frame. UL listed.

• Input: 115 / 230v @ 47 / 63 Hz Single Phase
• Output: 7v DC @ 10 amp / 70 watts
• Dimensions: 4"L x 3.25"W x 7.12"H, 7lbs

(PS) EMS7.5-300-2D

Weight: 35 lbs
Dimensions: 3.5"H x 19"W x 17.8" deep
Output: 0 to 7.5v @ 0 to 300 amps

Lambda power supply. Remote or front panel control. Includes manual. Brand new!!

• Input: 190 to 250 vac, 1 phase @ 20 amps or 190 to 250 vac, 3 phase @13.5 amps, 47 to 63 Hz
• Output: 0 to 7.5v @ 0 to 300 amps
• Dimensions: 3.5"H x 19"W x 17.8" deep
• Weight: 35 lbs

(PS) PM8.1-12.0A

Dimensions: 6-1/2" x 6-3/4" x 7"H
Output: 8.1 vdc (trimmable) @ 12.0 amps
Input: 105 / 125 vac, 50 / 420 Hz

Technipower power supply. Hermetically sealed. Terminals and four 1/4-20 mount studs on bottom. No box.

• Input: 105 / 125 vac, 50 / 420 Hz
• Output: 8.1 vdc (trimmable) @ 12.0 amps
• Dimensions: 6-1/2" x 6-3/4" x 7"H

(PS) DAPS12-.75

Dimensions: 5" x 4" x 3" overall
Output: ±12v @ 0.75 amps
Input: 115 / 230v AC @ 47 - 440 Hz

Adtech linear power supply. Brand new in the box!!

• Input: 115 / 230v AC @ 47 - 440 Hz
• Output: ±12v @ 0.75 amps
• Dimensions: 5" x 4" x 3" overall

(PS) SVS150-12

Dimensions: 4.75" x 1.77"H x 8.5"L
Output: 12v nominal @ 12.5 amps (11.4 - 12.6v adjustable), 150w
Input: 85v - 132v / 180v - 265v @ 47 / 63 Hz

Lambda adjustable power supply. 150 watts.

• Input: 85v - 132v / 180v - 265v @ 47 / 63 Hz
• Output: 12v nominal @ 12.5 amps (11.4 - 12.6v adjustable), 150w
• Dimensions: 4.75" x 1.77"H x 8.5"L

(PS) 100B12HA

12v @ 7 amp
Dimensions: 4"L x 3.25"W x 7.12"H, 7 lbs
Output: 12v DC @ 7 amp / 85 watts

Acme Electric Corporation unregulated linear power supply. 90% efficiency, open frame. UL listed.

• Input: 115 / 230v @ 47 / 63 Hz Single Phase
• Output: 12v DC @ 7 amp / 85 watts
• Dimensions: 4"L x 3.25"W x 7.12"H, 7 lbs

(PS) SC12-42

Dimensions: 5" x 2-1/2"H x 11-1/2"L
Output: 12 vdc @ 42 amps / 500 watts
Input: 115v / 230v @ 12 amps / 6 amps 50 / 60 Hz

Todd Manufacturing power supply. Used but in excellent condition.

• Input: 115v / 230v @ 12 amps / 6 amps 50 / 60 Hz
• Output: 12 vdc @ 42 amps / 500 watts
• Dimensions: 5" x 2-1/2"H x 11-1/2"L

(PS) PWRSPY99

+12 vdc @ 400ma
+5 vdc @ 1.2 amps
-5 vdc @ 200ma

It never fails. Dig deep enough in the warehouse and you can find buried treasure. We ran out of these nice triple voltage supplies once upon a time. Now we have about 200 in stock... while they last. You supply 15 - 30 vac to the board.

(PS) TR100-25-12

0 to 12 vdc
0 to 25 amps
15" x 18" x 11-1/2" high

Variable supply with dual meters (one digital, one analog). 0 to 12 vdc, 0 to 25 amps, front panel adjustable. 15" x 18" x 11-1/2" high. Binding post outputs. 115v, 5 amp input. Used.

(PS) DSP60-12

Dimensions: 3-1/2"H x 2-3/4"W x 2-3/16" deep
Output: 12v DC, 54 watt @ 4.5 amps
Input: 100-240v AC

TDK-Lambda power supply. New in box with din rail mount manual.

• Input: 100-240v AC
• Output: 12v DC, 54 watt @ 4.5 amps
• Dimensions: 3-1/2"H x 2-3/4"W x 2-3/16" deep

(PS) NP3.0-6.0

3 vdc @ 6 amps, 4" x 4-5/8" x 6" high.

(COL) 270-2290-160

4-1/4" x 3-5/8" x 5-5/8" high
320 to 480Hz
5.1 vdc @ 6 amps

5.1 vdc @ 6 amps. 320 to 480Hz. 4-1/4" x 3-5/8" x 5-5/8" high.

(PS) PB3367

Dimensions: 3-1/4" x 3-7/8" x 5-1/4"H
Output: 6.8v DC @ 0.5 amp ±0.5%
Input: 105 - 125v AC @ 48 - 62 Hz

CEA high stability supply. Used, removed.

• Input: 105 - 125v AC @ 48 - 62 Hz
• Output: 6.8v DC @ 0.5 amp ±0.5%
• Dimensions: 3-1/4" x 3-7/8" x 5-1/4"H

(PS) NP17.5-1.5

4" x 4-5/8" x 6" high
17.5 vdc @ 1.5 amps

17.5 vdc @ 1.5 amps, 4" x 4-5/8" x 6" high.

(PS) BRS509

Dimensions: 1.25"L x 8"W x 4"H
Output: 9v @ 200ma
Input: 4.65 to 5.5v

Power One PC mount DC/C module. 1.5 watt, DIP.

• Input: 4.65 to 5.5v
• Output: 9v @ 200ma
• Dimensions: 1.25"L x 8"W x 4"H

(PS) IWD4805

±5v @ 1 amp
1.5 watt, DIP
Dimensions: 2"L x 1"W x 0.4"H

Power One PC mount DC/C module. 1.5 watt, DIP.

• Input: 36-72v
• Output: ±5 @ 1 amp
• Dimensions: 2"L x 1"W x 0.4"H

(PS) HA5-1.2/OVP

Dimensions: 3.75"L x 1.6"H x 3"W
Output: 5v DC @ 1.2 DC amps
Input: 115 / 230 vac, 47-440 Hz

Power One, open frame power supply. 1.2 DC amperes nominal single power output current. Includes data sheet. Weighs 1.25 lbs. New, old stock. NSN: 6130-01-160-5342.

• Input: 115 / 230 vac, 47-440 Hz
• Output: 5v DC @ 1.2 DC amps
• Dimensions: 3.75"L x 1.6"H x 3"W

(PS) SWS152T-5/15/15

Dimensions: 4-3/4" x 2-1/2"H x 11-1/2"L
Output: 5v DC @ 20 amps, +15v DC @ 4 amps, -15v DC @ 4 amps
Input: 115 / 230v @ 47-440 Hz

Acme power supply. 150 watts. Brand new in the box!

• Input: 115 / 230v @ 47-440 Hz
• Output: 5v DC @ 20 amps, +15v DC @ 4 amps, -15v DC @ 4 amps
• Dimensions: 4-3/4" x 2-1/2"H x 11-1/2"L

(PS) SPS30DA12/15-OVP-21

Dimensions: 2-1/2" x 4" x 4-3/4"
Output: 12 - 15v DC @ 0.7 amps x 2
Input: 115v / 230v @ 47 - 440 Hz

Standard Power / Acme linear dual power supply. 0.1% line-load regulation. NSN: 6130-01-099-6910.

• Input: 115v / 230v @ 47 - 440 Hz
• Output: 12 - 15v DC @ 0.7 amps x 2
• Dimensions: 2-1/2" x 4" x 4-3/4"

(PS) XL750-3638

5 vdc @ 100 amps
2x 12v DC @ 10 amps
110v - 220v input

Boschert Computer Products power supply. 5v DC @ 100 amps. 2 x 12v DC @ 10 amps. 110v - 220v input. 5" x 8" x 13"L. New in the box!!

(PS) HB5-3/OVP-A

5v DC @ 3 amps
100, 120, 220, 230 / 240v @ 47-63 Hz Input
4" x 4-3/4" x 2"H

Power One linear power supply. 5v DC @ 3 amp output. 100, 120, 220, 230 / 240v @ 47-63 Hz Input. Includes over voltage protection. 4" x 4-3/4" x 2"H. Used, excellent condition.

(PS) S-150-7.5

Dimensions: 4-1/2" x 2" x 8"L
Output: 7.5v DC @ 20 amps
Input: 110 - 120v, 220 - 240v

Meanwell switcher power supply.

• Input: 110 - 120v, 220 - 240v
• Output: 7.5v DC @ 20 amps
• Dimensions: 4-1/2" x 2" x 8"L

(PS) ATS065T-P120

Output: 12v DC @ 5 amps
Input: 100-240v AC @ 50/60 Hz
Manufactured by Adapter Tech

Adapter Tech power supply. Originally a power supply for Firewire Hub. 5.5mm power plug, positive center. Requires AC power cord like (WCC) BMC-3. Alternate P/N: TR9CE5000CCPFRG2425.

• Input: 100-240v AC @ 50/60 Hz
• Output: 12v DC @ 5 amps

(PS) PL6.0-3.0A

Dimensions: 4.31"L x 4.75"H x 3.69"W
Output: 6v DC @ 3 amps DC
Input: 105 - 125v AC @ 50 / 400 Hz

TechniPower / Unipower highly regulated power supply / converter. Great filament supply for high end audio amps. 3-5/16" x 2-11/16" mounting centers. New surplus. Alt. P/N: 138C004H02. NSN: 6130-00-137-7695. DC: 1978.

• Input: 105 - 125v AC @ 50 / 400 Hz
• Output: 6v DC @ 3 amps DC
• Dimensions: 4.31"L x 4.75"H x 3.69"W

(PS) TR9CE5000CCPFRG2425

Dimensions: 2-1/8" x 1-1/4" x 4-3/4"L
Output: 12v DC @ 5 amps
Input: 100 - 240v AC @ 50/60 Hz

Globtek power supply. 60 watts. 5.5mm power plug positive center. Requires AC power cord like (WCC) BMC-3. Alt. P/N: GT-81081-6012-T3.

• Input: 100 - 240v AC @ 50/60 Hz
• Output: 12v DC @ 5 amps
• Dimensions: 2-1/8" x 1-1/4" x 4-3/4"L

(PS) GOL-150LP

New in the box!!
Load regulation: 0.2% - 5v outputs
Line regulation: 0.2%

GSC Electric 150w switching power supply. 5 outputs. +5v @ 15 amp / +12v @ 4 amp / -12v @ 4 amp / -5v @ 2 amp / +24v @ 4 amp. 110 / 220v input. Line regulation: 0.2%. Load regulation: 0.2% - 5v outputs, 2.5% for others. 13-1/2" x 5" x 2-1/2". New in the box!!

(PS) HP6384A

4 - 5.5 volts @ 0 - 8 amps
Dimensions: 14" x 8.5" x 4"H
Manufactured by Hewlett Packard

Hewlett Packard regulated, variable DC power supply with analog volt / amp metering. Variable course and fine control knobs for voltage and current adjustments. Precision, plating / bench / lab. Model 6384A.

• Output: 4 - 5.5 volts @ 0 - 8 amps
• Dimensions: 14" x 8.5" x 4"H

(PS) ATE6-10M

0 - 6 volts @ 0 - 10 amps
Dimensions: 18" x 4" x 5"H
Manufactured by Kepco

Kepco precision, lab, regulated, variable DC power supply with analog volt / amp metering. Variable "ten turn" control knobs for precise voltage and current adjustments. The analog meters provides accurate readings of both voltage and current and the output connections are standard rear panel "barrier strip" connections. In addition, rear panel connections are provided for remote sense.

• Output: 0 - 6 volts @ 0 - 10 amps
• Dimensions: 18" x 4" x 5"H

(PS) LPT-7202-FM

0 - 7v DC @ 0 - 5 amps / Dual: 0 - 20v @ 0 - 1.5 amps
Dimensions: 11.5" x 12.5" x 5.5"H
Manufactured by Lambda

Lambda regulated variable DC power supply with analog volt / amp metering. Triple output, precision, bench / lab. One of the three outputs provides a single, 0 - 7v @ 0 - 5 amp output with constant voltage and / or constant current modes. The other dual outputs each provide 0 - 20v @ 0 - 1.5 amps. These two supply outputs can be interconnected on the rear barrier strip to track each other providing ± supply rails or can be used independently and in series for greater voltage or in parallel for greater current output. standard "banana" type 5-way binding posts. Includes copy of manual.

• 1st Output: 0 - 7v @ 0 - 5 amp
• Dual Outputs: 0 - 20v @ 0 - 1.5 amps
• Dimensions: 11.5" x 12.5" x 5.5"H

(PS) VA5MT600

5v @ 6 amps
Dimensions: 3.5" x 5" x 7"H
Manufactured by Acopian

Acopian model VA5MT600, (same as A5MT600 , "V" prefix = over-voltage option), 5v (adjustable +/- 0.5v) @ 6 amps, precision, bench / lab, regulated DC power supply MPS. The Acopian A5MT600 VA5MT600 provides a single, 5v @ 6 amps output with variable control pot for +/- 0.5v adjustment. The DC supply provides 5v @ 6 amps, constant voltage and current limit. The output connections are a rear panel high current barrier strip. In addition, this power supply is "convection cooled" and does not utilize a cooling fan thereby greatly extending it's service life! This is truly a laboratory grade power supply with hum and noise specifications measured in micro volts and supply regulation accurate to 0.01%. Like new condition.

• Output: 5v @ 6 amps
• Dimensions: 3.5" x 5" x 7"H

(PS) A5MT900

5v DC (±0.5v) @ 9 amps
Dimensions: 3-1/2" x 5-1/8" x 10"L
Manufactured by Acopian

Acopian regulated power supply. Like new!

• Output: 5v DC (±0.5v) @ 9 amps
• Dimensions: 3-1/2" x 5-1/8" x 10"L

(PS) HP6203B

0 - 7.5v @ 0 - 3 amps
Dimensions: 14" x 8-1/2" x 4"H
Manufactured by Hewlett Packard

Hewlett Packard power supply with analog volt / amp metering. Variable course and fine control knobs for voltage and current adjustments. The DC supply provides 0 - 7.5v @ 0 - 3 amps constant voltage and / or constant current. The analog meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel connections provide remote sense and voltage programming / tracking capabilities.

• Output: 0 - 7.5v @ 0 - 3 amps
• Dimensions: 14" x 8-1/2" x 4"H

(PS) HP6281A

0 - 7.5v @ 0 - 5 amps
Dimensions: 16" x 8.5" x 4"H
Manufactured by Hewlett Packard

Hewlett Packard precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering, with variable course and fine control knobs for voltage and current adjustments. The analog meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel connections provide remote sense and voltage programming / tracking capabilities.

• Output: 0 - 7.5v @ 0 - 5 amps
• Dimensions: 16" x 8.5" x 4"H

(PS) LQ520

0 - 10v @ 0 - 5 amps
Dimensions: 17" x 4" x 5.5"H
Manufactured by Lambda

Lambda precision, electro plating / bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering with a variable course and fine control knob for voltage and a control knob current adjustments. The DC supply provides, 0 - 10v @ 0 - 5 amps, constant voltage and / or constant current. The digital meter provides accurate readings of both voltage and current and the output connections are standard "banana" type 5-way binding posts. Rear panel high current connections are provided with remote sense and voltage programming / tracking capabilities.

• Output: 0 - 10v @ 0 - 5 amps
• Dimensions: 17" x 4" x 5.5"H

(PS) LLS5008

Dimensions: 13" x 4" x 6"H
Output: 0 - 8v @ 0 - 10 amps
Manufactured by Lambda

Lambda precision plating / bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering, with a direct entry keyboard for voltage and current adjustments. Fully regulated and precision power supply is vastly superior to simple plating "rectifiers" because it is accurately controllable yielding very consistent results and is the ideal power supply for plating applications that require voltages up to 8 volts and draw as much as 10 amps. The rear panel output connections are standard "barrier strip" type, additional connections are provided with remote sense and voltage programming / tracking capabilities.

• Output: 0 - 8v @ 0 - 10 amps
• Dimensions: 13" x 4" x 6"H

(PS) LLS6008

0 - 8v @ 0 - 20 amps
Dimensions: 14" x 8" x 4.5"H
Manufactured by Lambda

Lambda precision plating / bench / lab, regulated variable DC power supply (rectifier) with front panel or HP-IB programmable / GP-IB remote interface, digital volt / amp metering. Direct entry keyboard for voltage and current adjustments. The dc supply provides constant voltage and / or constant current. Fully regulated and precision power supply is vastly superior to simple plating "rectifiers" because it is accurately controllable yielding very consistent results, and is the ideal power supply for plating applications that require voltages up to 8 volts and draw as much as 20.0 amps. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provides accurate readings of both voltage and current and the rear panel output connections are standard "barrier strip" type, additional connections are provided with remote sense and voltage programming / tracking capabilities.

• Output: 0 - 8v @ 0 - 20 amps
• Dimensions: 14" x 8" x 4.5"H

(PS) 227-4022

Dimensions: 3" x 3-1/2" x 5"H
Output: 6v DC (trimmable) @ 375 mA
Primary: 105 - 125v AC / 50 - 400 Hz

TechniPower regulated power supply. Hermetically sealed. 6v DC - trimmable. NSN: 6130-00-056-8126.

• Primary: 105 - 125v AC / 50 - 400 Hz
• Output: 6v DC (trimmable) @ 375 mA
• Dimensions: 3" x 3-1/2" x 5"H

(PS) ABC7.5-2M

Dimensions: 8-1/8" x 9-3/4"L x 4-3/4"H
Output: 0 - 7.5 v DC @ 0 - 2 amps
Input: 115 / 230v @ 50 - 400 Hz

Kepco DC variable power supply with remote sense.

• Input: 115 / 230v @ 50 - 400 Hz
• Output: 0 - 7.5 v DC @ 0 - 2 amps
• Dimensions: 8-1/8" x 9-3/4"L x 4-3/4"H

(PS) TXPRS0002

Requires sealed lead acid 4 AH battery
90mm x 70mm x 107mm (approximate)
Manufactured by Qualcomm

Qualcomm battery-packed power supply. Requires sealed lead acid 4 AH battery (not included). 90mm x 70mm x 107mm (approximate). Essentially, this is a housing with charger for battery backups.

(PS) SWS300-12

Dimensions: 4" x 2" x 8-1/2"L
Output: 12v DC (±5%) @ 26 amps, 300 watts
Input: 100 - 240v AC @ 4.4 amps, 50/60 Hz

Lambda regulated power supply. New, unused. Brand new in the box!!

• Input: 100 - 240v AC @ 4.4 amps, 50/60 Hz
• Output: 12v DC (±5%) @ 26 amps, 300 watts
• Dimensions: 4" x 2" x 8-1/2"L

(PS) HP6551A

0 - 6v @ 0 - 60 amps
Dimensions: 20" x 17" x 6"H
Manufactured by Hewlett Packard

Hewlett Packard precision, plating / bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering. Two knobs for all adjustments including voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provides accurate readings of both voltage and current and the rear panel output connections are standard "buss bar" type, additional connections are provided with remote sense and voltage programming / tracking capabilities.

• Output: 0 - 6v @ 0 - 60 amps
• Dimensions: 20" x 17" x 6"H

(PS) HP6235A

0 - 6v @ 0 - 1 amps & ± 0 - 18v @ 0 - 0.2 amps
Dimensions: 6-3/16"W x 3-1/2"H x 8"L
Manufactured by Hewlett Packard

Hewlett Packard triple output variable DC power supply with analog volt / amp metering. Dual outputs provide 0 - 18v @ 0 - 0.2 amps and can track each other providing ± supply rails with adjustable voltage offset or can be used independently and in series for greater voltage. Banana type 5-way binding posts. Used, but in excellent working condition. Includes operation and service manuals.

• Output: 0 - 6v @ 0 - 1 amps
• Output: ± 0 - 18v @ 0 - 0.2 amps
• Dimensions: 6-3/16"W x 3-1/2"H x 8"L

(PS) 4600D-10375

Dimensions: 25"D x 19"W x 5.25"H
Output: 0 - 10v @ 0 - 375 amps
Input: 195 - 250v AC, 60 Hz

Power Ten precision, bench / lab, regulated, variable DC power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming.

• Input: 195 - 250v AC, 60 Hz
• Output: 0 - 10v @ 0 - 375 amps
• Dimensions: 25"D x 19"W x 5.25"H

(PS) 4600D-10500

Dimensions: 25"L x 19"W x 5.25"H
Output: 0 - 10v DC @ 0 - 500 amps
Input: 190 - 253v, 3 phase, 50/60Hz

Power Ten power supply. Digital readouts, front panel controls.

• Input: 190 - 253v, 3 phase, 50/60Hz
• Output: 0 - 10v DC @ 0 - 500 amps
• Dimensions: 25"L x 19"W x 5.25"H

(PS) EMS10-250-2-D-0209F

Dimensions: 21" x 19" x 3.5"H
Output: 0 - 10v @ 0 - 250 amps
Input: 190 - 250v AC, 60 Hz, 1 or 3 ph

Lambda precision, electro plating / bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering. No front panel control. Voltage and current controlled via rear terminal strip and application of 0-10v. Digital meters.

• Input: 190 - 250v AC, 60 Hz, 1 or 3 ph
• Output: 0 - 10v @ 0 - 250 amps
• Dimensions: 21" x 19" x 3.5"H

(PS) EMS5.5-150-1-D

0 - 5.5v @ 0 - 150 amps
Dimensions: 20" x 19" x 1.75"H
Manufactured by EMI Lambda

EMI Lambda brand (Electronic Measurements Inc.) precision, electro plating / bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering. Precision "ten turn" control knob for voltage adjustment, and a control knob for current adjustment. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming.

• Output: 0 - 5.5v @ 0 - 150 amps
• Dimensions: 20" x 19" x 1.75"H

(PS) RPS-2-2-1-3-115-2-372

5v DC @ 25 amps, 12v DC @ 16 amps,
-12v DC @ 6.8 amps, -5v DC @ 6 amps
Input: 115v AC

ACDC Quad fixed voltage supply. Terminal strip output with sense.

• Input: 115v AC
• Outputs: 5v DC @ 25 amps, 12v DC @ 16 amps, -12v DC @ 6.8 amps, -5v DC @ 6 amps
• Dimensions: 22"D x 19"W x 5.25"H

(PS) 3400D-10200

Dimensions: 21" x 19" x 3.5"H
Output: 0 - 10v @ 0 - 200 amps
Input: 208v AC, 60 Hz, 1 ph

Power Ten power supply with digital volt / amp metering. Precision "ten turn" control knobs for voltage and current adjustments. Includes the adjustable over-voltage "crowbar" protection option. The digital meters provide accurate readings of both voltage and current and the output connections are rear panel high current "buss bars", with additional connections provided for remote voltage sense and programming.

• Input: 208v AC, 60 Hz, 1 ph
• Output: 0 - 10v @ 0 - 200 amps
• Dimensions: 21" x 19" x 3.5"H

(PS) LES-EE-01-0V

0 - 7.5v @ 0 - 60 amps
Dimensions: 19" x 8.5" x 5"H
Manufactured by Lambda

Lambda precision, bench / lab, regulated, variable DC power supply (rectifier) with digital volt / amp metering. Variable 10 turn control knobs for voltage and current adjustments. The digital meter provides accurate readings of both voltage and current. The output connections are high current threaded studs. In addition, other rear panel connections provide remote sense and voltage programming / tracking capabilities. Precision regulated dc lab supply that can be utilized for any application in plating, and electronic circuit design or repair.

• Output: 0 - 7.5v @ 0 - 60 amps
• Dimensions: 19" x 8.5" x 5"H

(PS) LYS-P-5

5v DC @ 50 amps ±5%
Dimensions: 4-1/2" x 4-3/4" x 10"L
Input: 105 - 132v @ 47 - 63 Hz

Lambda linear power supply. New!

• Input: 105 - 132v @ 47 - 63 Hz
• Outputs: 5v DC 50 amps ±5%
• Dimensions: 4-1/2" x 4-3/4" x 10"L

(PS) ADXC0017

Dimensions: 8-3/8" x 4-1/4" x 3-1/4"H
Output: 12v DC @ 1 amp
Input: 100 - 250v @ 0.4 amps, 50/60 Hz

Converter Concepts Model ADXC0017 power supply. Ventilated plastic cabinet. IEC cord input for 115v AC (115 - 250v AC). Brand new in the box! Makes a great TV cabinet project.

• Input: 100 - 250v @ 0.4 amps, 50/60 Hz
• Output: 12v DC @ 1 amp
• Dimensions: 8-3/8" x 4-1/4" x 3-1/4"H

(PS) DAPS-12-.75A

Dimensions: 3-3/4" x 4-3/4" x 2-3/4"H
Output: ±12v DC @ 0.75 amp
Input: 115 / 230v @ 47-440 Hz

AdTech linear power supply. Brand new in the box!

• Input: 115 / 230v @ 47-440 Hz
• Output: ±12v DC @ 0.75 amp
• Dimensions: 3-3/4" x 4-3/4" x 2-3/4"H

(PS) 200B12HA

12v DC @ 15 amps
115 / 230v @ 50/60 Hz input
8.1" x 5"W x 4"H

Acme unregulated linear power supply. 12v DC @ 15 amp output. 115 / 230v @ 50/60 Hz input. 8.1" x 5"W x 4"H. Brand new in the box!

(PS) AM-120U-S2-929

Dimensions: 3-1/4" x 5" x 1-1/2"H
Output: 12v DC @ 10 amps
Input: 100 - 240v AC @ 3.15 amps, 47-63 Hz

Power Solutions switcher power supply.

(PS) 190AP

0 - 15v DC @ 5 amps or 0 - 6v DC @ 10 amps
0 - 20v AC @ 5 amps
0 - 10v AC @ 10 amps

"Lab-Volt" Model 190AP adjustable AC / DC power supply. Includes 5 foot AC cord.

• Input: 120v @ 10 amps, 60 Hz
• Output: 0 - 15v DC @ 5 amps or 0 - 6v DC @ 10 amps or 0 - 20v AC @ 5 amps or 0 - 10v AC @ 10 amps
• Dimensions: 10" x 9" x 7"H

(PS) SP639A

5v DC @ 140 amps
12v DC @ 6 amps
Dimensions: 5" x 14-1/2"L x 6"H

Power One power supply. Great for plating! Sense terminals. Brand new in the box!

 
• Input: 100 - 240v AC, 50/60 Hz
• Outputs: 5v DC @ 140 amps, 12v DC @ 6 amps
• Dimensions: 5" x 14-1/2"L x 6"H

(PS) USC70-405

+5v DC @ 5 amps / -5v @ 3 amps
-15v @ 2 amps / +15v @ 2 amps
Input: 90 - 250v AC @ 2 amps, 47 - 63 Hz

Digital Power open frame power supply.

• Input: 90 - 250v AC @ 2 amps, 47 - 63 Hz
• Outputs: +5v DC @ 5 amps / -5v @ 3 amps /
  -15v @ 2 amps / +15v @ 2 amps

(PS) PS/EL30N01.5

0 to -30kv @ 1.5 mA
Manufactured by Glassman
Alt. P/N:

Glassman HV negative power supply. 1 phase. 0 to -30kv, 1.5 mA output . 10 turn pot adjustment on front panel. Analog meters. No current limit control. No rear remote control capabilities. Optional HV cable available for $150.00. Refurbished and ready to go.

• Input: 115v, 48 / 63 Hz
• Output: 0 to -30 kv, 1.5 mA
• Dimensions: 19" x 3-1/2"H x 16"

(PS) PB2874

6.3v @ 3 amps
Output: 6.3v @ 3 amps, ±5%
Input: 105 - 125v AC, 50 - 420 Hz

CEA regulated power supply. Single phase.

• Input: 105 - 125v AC, 50 - 420 Hz
• Output: 6.3v @ 3 amps, ±5%

(PS) 9E13D/9E13D

DC: 4/88
3.5"L x 2.25"W x 1"H
0.130 output amps

Acopian AC to DC multiple output miniature power module. Nominal output voltage: 9v. 0.130 output amps. Regulation load / line: ±0.05% each. Two threaded mounting holes on bottom and 8 terminal wires. 3.5"L x 2.25"W x 1"H. NOS. Brand new in the box. DC: 4/88.

(PS) 05D-0124-62A

Dimensions: 5" x 7" x 2-1/2"H
Outputs: +5v DC @ 60 amps / +12v DC @ 5 amps / -12v DC @ 1 amp
Input: 115v / 230v

Conversion Equipment Co. switching power supply. 375 watts. Includes test data. New, unused.

• Input: 115v / 230v
• Outputs: +5v DC @ 60 amps / +12v DC @ 5 amps / -12v DC @ 1 amp
• Dimensions: 5" x 7" x 2-1/2"H

(PS) JQE6-10MVP

Output: 0-6 v @ 0-10 amps
Input: 110v AC
Manufactured by Kepeo

Kepeo Precision Bench/lab variable DC Power Supply with analog volt lamp meters. Variable 10 turn control knobs for precise voltage & current adjustments. Rear barrier strip for remote sense & voltage programming/tracking. Output: 0.6 v @ 0-10 amps. 18" x 4" x 5H".

(PS) BX2

6-1/2"L x 6-1/8"W x 6-3/4"H
Outputs: 12 volts @ 6 amps
Input: 7 amps, 50/60 Cyc

Schauer Manufacturing Corp vintage battery charger. AC input volts: 7 amps, 50/60 Cyc. DC output: 12v, 6 amps. Automotive Division, two clips (negative & positive).Input: 7 amps, 50/60 CycOutputs: 12 volts @ 6 ampsDimensions: 6-1/2"L x 6-1/8"W x 6-3/4"H

(PS) LXD-B-152-R

Dimensions: 5" x 6-1/2" x 3"H
Output: 12 - 15v DC @ 1.6 amps
Input: 105v - 132v, 47-63 Hz

Lambda regulated power supply. Used. Only one available.Input: 105v - 132v, 47-63 HzOutput: 12 - 15v DC @ 1.6 ampsDimensions: 5" x 6-1/2" x 3"H

(PS) LXS-B-5-0V-R

Output: 5v DC @ 5.8 amps ±5%
Input: 105v - 132v, 47-63 Hz
Dimensions: 4-7/8" x 6-1/2" x 3-1/4"H

Lambda regulated power supply. Used. Only one available.Input: 105v - 132v, 47-63 HzOutput: 5v DC @ 5.8 amps ±5%Dimensions: 4-7/8" x 6-1/2" x 3-1/4"H

(PS) M506

Input: 230v AC, 60 Hz, 2 amps, 1 phase
Output: 0 - 6v DC @ 50 amps
Dimensions: 10-1/2" x 21"L x 10-1/2"H

HBS DC power supply. Metered volts and amps. Our variacs are the highest quality, MADE IN THE USA! Not poorly made imported copies.Input: 230v AC, 60 Hz, 2 amp