Browse back one page

Low Voltage Transformers: 30 to 200 volts

sort by:

Primary: 115/127/220 volts
Secondary: 10/17.5/20/47.5/150 volts
(one 20V-0-20V, 10V, 17.5V, 47.5V, and 150V outputs)

European open frame transformer. 150 watt.

Primary: 115/230 volts
Secondary: 38/50 volts
(38V c.t. @ 3A, 50V c.t. @ 3A)

Bullock Magnetics transformer.

Primary: 120 volts
Secondary: 5/50/100 volts
(one 5V @ 3A, one 100V c.t. @ 100mA)

Plate & filament transformer. 120 volt primary input, two secondary outputs one 5 volt at 3 amps and one 100 volt center tapped (50 volt x 2) at 100 milliamps.

Load Testing
Load
Output Voltage
                           
Current
                           
22 ohm
7.8v
                           
0.354
                           
100 ohm
30v
                           
0.300
                           
300 ohm
60v
                           
0.200
                           
500 ohm
75v
                           
0.150
                           
1000 ohm
88v
                           
0.088
                           

Primary: 115/230 volts
Secondary: 30 volts c.t. @ 500mA
Apparent Power: 15 VA

Better Coil & Transformer Co. open frame transformer. Dual 115 vac primaries, Black / Black, Brown / Brown. Center tapped secondary: Red / Green, Orange center tap.

Primary: 115 volts
Secondary: 18/36 volts
(18V @ 240mA parallel or 36V c.t. @ 170mA)

Signal Transformer split bobbin / high isolation PC mount transformer.

Primary: 115 volts
Secondary: 30 volts @ 500mA
Apparent Power: 15 VA

SNC transformer, hermetically sealed. Primary: black wires. Secondary: green wires. Harris P/N: 472-0643-000.

Primary: 230 volts 50/60 Hz
Secondary: 8.4/37 volts
37V RMS @ 750mA, 8.4V @ 120mA

Harris transformer. Harris P/N: 472-1023-000.

Primary: 115 volts 50/60 Hz
Secondary: 8.4/37 volts
37V RMS @ 750mA, 8.4V @ 120mA

Harris power transformer. Harris P/N: 472-0587-000.

Primary: 115/230 volts 50/60 Hz
Secondary: 12.3/38 volts RMS
38V RMS @ 1.5A, 12.3V RMS @ 2A

Electronic Transformers Corp. was made for Mackay Marine. Sealed, heavy duty construction.

Primary: 120 volts 60 Hz
Secondary: 45 volts @ 25 amps
Apparent Power: 1000 VA

High current transformer. Removed from equipment. NSN: 5950-01-020-4102

Primary: 120 volts
Secondary: 26.5 volts @ 300mA
Apparent Power: 40 VA

Control transformer has a 40va rating. Mounting configuration: foot, plate, knockout, wire length 9".

Primary: 120 volts 50/60 Hz
Secondary: 6.5/16/26/33/126 volts
6.5/16/26/33V @ 1.8A, 126V c.t. @ 60mA

Electro-Line transformer. Epoxy coated. Mounts with four #10 bottom holes. Weighs 2.5 pounds.  Primary terminals 1 and 2, 115V AC 50/60 Hz also Primary terminals 3 and 4, 115V AC; Secondary terminals 5, 6, 7, 8, and 9 supply 6.5V, 16V, 26V, or 33V per tap @ 1.8 amps.  2nd Secondary at terminals 10, 11 (c.t.), and 12 supply 126V (or 63V) at 60 milliamps.   NSN: 5950-01-061-7495.

Primary: 120 volts
Secondary: 24.3/40.5 volts
40.5V @ 4A, 24.3V @ 30mA

Lambda power transformer. Electrostatically shielded. Mounts horizontally with bell and wires on top. Studs on bottom. NSN: 5950-00-050-5240.

Primary: 120 volts
Secondary: 14/41.6 volts
14V @ 0.5A, 41.6V c.t. @ 0.5A

Freed transformer. Electrostatically shielded. Freed # 4381. 120V 60Hz primary (black, white/black) to two secondaries, one 14V @ 500 milliamp (white, green pair) and one 41.6V center tapped (white, red pair with white/yellow c.t.) @ 500 milliamps.  NSN: 5950-00-855-8357.

Primary: 117 volts
Secondary: 6/16/44 volts
44V @ 500mA with taps at 16V and 6V

American Magnetics center tapped transformer. Copper electrostatic shield. P/N: 24-AM-4041.

Primary: 120 volts 60 Hz
Secondary: 118 volts @ 1A
Apparent Power: 120 VA

Sola constant voltage transformer. Solid as a brick. Includes capacitor. New.

Primary: 200 volts 50/60 Hz
Secondary: 96/115 volts @ 1A
Apparent Power: 115 VA

General Electric transformer. Sealed. Mounts top or bottom by four 10-32 taps.

Primary: 250/500 volts
Secondary: 120 volts
Apparent Power: 200 VA

Burton transformer. 1 phase, 60 Hz, 200 va, 55º rise.

Primary: 120 volts
Secondary: 125 volts @ 4A
Apparent Power: 400 VA

Sola constant voltage transformer. Mounts horizontal on chassis with terminals out bottom. Includes capacitor. New in box. Date code = 1961!!

Primary: 115 volts
Secondary: 165 volts @ 500mA
Apparent Power: 80 VA

Quality Transformer (Chicago) power transformer. 115v primary (Black/Black), 6.6 ohms. 165 vac secondary (Brown/Red), 500ma, 34 ohms. Electrostatic shield (Green/Green). N.O.S. U.S. made in the 1970's.

Auto Transformer

(TP) 1404D04

Primary: 120 volts
Secondary: 11.3/158/180/202/225/236/23000 volts
Dimensions: 10" x 11" x 12"H

Magnetran Broadcast transmitter salvage. Has lots of life left. Use an auto transformer by applying a higher voltage to the outside tap to ground and pull off any lower voltage on the rail to ground. Transformer removed from 20kw RCA transmitter.

Primary: 105/115/125 volts 50/60 Hz
Secondary: 32/225/550 volts
one 400V c.t. @ 120mA and two 32V @ 80ma

Berkshire Transformer power transformer. Hermetically sealed. Terminals & posts on bottom. NSN: 5950-809-9164.

Primary: 115/230 volts 45-65 Hz
Secondary: 32.5/40/65/67.5/80/130/135/220/440 volts
65V c.t. @ 500mA, 80V c.t. @ 110mA, 135V c.t. @ 200mA, 440V c.t. @ 40mA and one 130V c.t. @ 30mA

Sealed transformer, terminals out bottom, corner posts. Multi-tapped secondary has common center tap with four outer windings: 440 vct @ 40 madc, 135 vct @ 200 madc, 80 vct @ 110 madc, 65 vct @ 500 madc + stand alone extra winding of 130 vct @ 30 madc. Hermetically sealed. Electrostatically shielded winding.

Primary: 440 volts 57-63 Hz Single Phase
Secondary: 115 volts @ 6A
Apparent Power: 3000 VA

Micron Industries step-down transformer. 1 phase, 3 kVA. MIL-T-16315. NSN: 5950-01-166-1789.

Primary: 117/234 volts 50/60 Hz
Secondary: 15/30 volts
(two 15V @ 3.2A or one 15V @ 6.4A or one 30V @ 3.2A)

Two 117v 50/60Hz International Primaries; Two secondaries 15v, 3.2amp, 95VA. 3.9"DIA x 1.5"H 2.2lbs. UL & CSA recognized/certified. 10" Color coded leads. Class A 105°C. Primaries must be connected in series or parallel.

Primary: 117/234 volts 50/60 Hz
Secondary: 18/36 volts
(two 18V @ 3.9A or one 18V @ 7.8A or one 36V @ 3.9A)

Two 117v 50/60Hz International Primaries; Two secondaries 18v, 3.9amp, 140VA. 3.9"DIA x 1.9"H 3lbs. UL & CSA recognized/certified. 10" Color coded leads. Class A 105°C. Primaries must be connected in series or parallel.

Primary: 117/234 volts 50/60 Hz
Secondary: 15/30 volts
(two 15V @ 10A or one 15V @ 20A or one 30V @ 10A)

Two 117v 50/60Hz International Primaries; Two secondaries 15v, 10amp, 300VA. 4.6"DIA x 2.6"H 5.7lbs. UL & CSA recognized/certified. 10" Color coded leads. Class A 105°C. Primaries must be connected in series or parallel.

Primary: 117/234 volts 50/60 Hz
Secondary: 30/60 volts
(two 30V @ 7.7A or one 30V @ 15.4 or one 60 @ 7.7A)

Two 117v 50/60Hz International Primaries; Two secondaries 30v, 7.7amp, 460VA. 5.4"DIA x 2.6"H 7.9lbs. UL & CSA recognized/certified. 10" Color coded leads. Class A 105°C.

Primary: 117/234 volts 50/60 Hz
Secondary: 24/48 volts
(two 24V @ 13A or one 24V @ 26A or one 48V @ 13A)

Two 117v 50/60Hz International Primaries; Two secondaries 24v, 13amp, 625VA. 5.5"DIA x 3.2"H 9.5lbs. UL & CSA recognized/certified. 10" Color coded leads. Class A 105°C. Primaries must be connected in series or parallel.

Primary: 117/234 volts 50/60 Hz
Secondary: 30/60 volts
(two 30V @ 10.4A or one 30V @ 20.8A or one 60V @ 10.4A)

Two 117v 50/60Hz International Primaries; Two secondaries 30v, 10.4amp, 625VA. 5.5"DIA x 3.2"H 9.5lbs. UL & CSA recognized/certified. 10" Color coded leads. Class A 105°C.

Primary: 120/230 volts AC 50/60 Hz
Secondary: 6.3/14.8/64/195/390 volts (6.3v @ 3.6A, 14.8v @ 2A, 64v @ 100mA, 195 @ 500mA, and 195/390 @ 1.5A)
Apparent Power: 740 VA

Tortran vacuum tube amplifier transformer. Center epoxy potted with 3/8" mount hole. Dual primaries 115v (230v in series) 50/60Hz 740va. Five secondaries 390v C.T. at 1.5 amps, 195v at 0.5 amps, 14.8v at 2 amps, 6.3v at 3.6 amps, 64v at 0.1 amps. 6.1"DIA x 3"H, 14 lbs.

Primary: 117/234 volts 50/60 Hz
Secondary: 55/110 volts
(two 55V @ 9A or one 55V @ 18A or one 110V @ 9A)

Two 117v 50/60Hz International Primaries; Two secondaries 55v, 9amp, 990VA. 6.5"DIA x 3"H 15.2lbs. UL & CSA recognized/certified. 10" Color coded leads. Class A 105°C.

Primary: 110/230 volts 60 Hz
Secondary: 18/36 volts
(two 18V @ 139mA or one 18V @ 278mA or one 36V @ 139mA)

110/230v 60Hz Primary; Two secondaries 18v, 139ma, (No load 25.5v, 2ma), 70% eff. For 110v supply power, primaries must be parallel; for 230v operation, primaries must be in series. OD: 47.mm ID: 6.mm x 18mm H

Primary: 110/230 volts 60 Hz
Secondary: 15/30 volts
(two 15V @ 1.66A or one 15V @ 3.32A or one 30V @ 1.66A)

110/230v 60Hz Primary; Two secondaries 15v, 1.667 amp, (No load 17.3v, 8ma), 86% eff. For 110v supply power, primaries must be parallel; for 230v operation, primaries must be in series. 82.4mmL x 82.4mmW x 37.5mmH, UL & VDE certifications, Maximum ambient temperature of 40°C

Primary: 110/230 volts 60 Hz
Secondary: 18/36 volts
(two 18V @ 89mA or one 18V @ 178mA or one 36V @ 89mA)

110/230v 60Hz Primary; Two secondaries 18v, 89ma, (No load 25.7v, 1.5ma), 70% eff. For 110v supply power, primaries must be parallel; for 230v operation, primaries must be in series. 44.7mmL x 44.7mmW x 19.5mmH, UL & VDE certifications, Maximum ambient temperature of 60°C

Primary: 110/230 volts 60 Hz
Secondary: 18/36 volts
(two 18V @ 139mA or one 18V @ 278mA or one 36V @ 139mA)

110/230v 60Hz Primary; Two secondaries 18v, 139ma, (No load 25.5v, 2ma), 68% eff. For 110v supply power, primaries must be parallel; for 230v operation, primaries must be in series. 49.7mmL x 49.7mmW x 19.5mmH, UL & VDE certifications, Maximum ambient temperature of 60°C

Primary: 110/230 volts 60 Hz
Secondary: 22/44 volts
(two 22V @ 114mA or one 22V @ 228mA or one 44v @ 114mA)

110/230v 60Hz Primary; Two secondaries 22v, 114ma, (No load 29.7v, 2ma), 68% eff. For 110v supply power, primaries must be parallel; for 230v operation, primaries must be in series. 49.7mmL x 49.7mmW x 19.5mmH, UL & VDE certifications, Maximum ambient temperature of 60°C

Primary: 110/230 volts 60 Hz
Secondary: 18/36 volts
(two 18V @ 417mA or one 18V @ 834mA or one 36V @ 417mA)

110/230v 60Hz Primary; Two secondaries 18v, 417ma, (No load 22.2v, 4ma), 80% eff. For 110v supply power, primaries must be parallel; for 230v operation, primaries must be in series. 60mmL x 60mmW x 26.3mmH, UL & VDE certifications, Maximum ambient temperature of 60°C

Primary: 110/230 volts 60 Hz
Secondary: 18/36 volts
(two 18V @ 972mA or one 18V @ 1.94A one 36V @ 972mA)

110/230v 60Hz Primary; Two secondaries 15v, 1.667 amp, (No load 17.3v, 8ma), 86% eff. For 110v supply power, primaries must be parallel; for 230v operation, primaries must be in series. 82.4mmL x 82.4mmW x 37.5mmH, UL & VDE certifications, Maximum ambient temperature of 40°C

Primary: 100/120/220/240 volts 50/60 Hz
Secondary: 110 volts @ 1.92A
Apparent Power: 230 VA

Quad 100/120/220/240v 50/60Hz primaries; One secondary 110v, 1.92 amp, 230VA. 4.6"DIA x 2.4"H 5.2lbs. Multiple primaries must be connected in series or parallel.

Primary: 100/120/220/240 volts
Secondary: 110/220 volts
(two 110V @ 2.5A or one 110V @ 5A or 220V @ 2.5A)

Quad 100/120/220/240v 50/60Hz Primaries; Two secondaries 110v, 5amp (240v, 2.5amp), 600VA. 6.2"DIA x 3.1"H 13lbs. Multiple primaries must be connected in series or parallel.

Primary: 100/120/220/240 volts 50/60 Hz
Secondary: 110/220 volts
(two 110V @ 4.16A or one 110V @ 8.3A or 220V @ 4.16A)

Quad 100/120/220/240v 50/60Hz Primaries; Two secondaries 110v, 8.33amp (220v, 4.16amp), 1000VA. 6.9"DIA x 3.5"H 20lbs. Multiple primaries must be connected in series or parallel. Factory new production overrun stock.

Primary: 100/120/220/240 volts 50/60 Hz
Secondary: 110/220 volts
(two 110V @ 12.5A or one 110V @ 25A or 220V @ 12.5A)

Quad 100/120/220/240v 50/60Hz Primaries; Two secondaries 110v, 25amp (240v, 12.5amp), 3000VA. 10"DIA x 4.3"H 47lbs. Multiple primaries must be connected in series or parallel.

Primary: 120 volts
Secondary: 170 volts
Apparant Power: 85VA

Quality Transformer power transformer. Electrostatically shielded.  Primary 120 volt, 8 ohm to secondary 170 volt at 500ma, 48 ohm DCR. 85VA.  Dimensions: 3" x 2-5/8" x 2-1/2" high. Made in the U.S. Circa 1970's.

Input: 115v AC @ 60 Hz
Output: 60v CT @ 16mA
Dimensions: 1"L x 1"H x 1.375"W

Signal Transformer Co. single phase transformer. 50 Hz min, 500 Hz max, single phase input / output. 6 pin. New, old stock.

Primary: 115 volts
Secondary #1: 192v AC @ 2 amps
Secondary #2: 155v AC @ 0.15 amps

Electronic Measurements transformer. 115v @ 47-800 Hz primary input. Two secondary outputs: 192v AC @ 2 amps & 155v AC @ 0.15 amps. 4.25" x 6" x 4.2"H.

Primary: 126/115/103v @ 57-420 Hz
Dual Secondary: 170v CT RMS @ 14mA
Dimensions: 1-1/2" x 1-1/2" x 2-1/4"H

Freed transformer. Hermetically sealed. Turret terminals on bottom. 1-3/16" mounting stud centers.

Primary: 117vAC #1 & 2
Secondary: 60v @ 100mA
Dimensions: 2-1/4" x 2-1/4" x 3"H

Navy transformer. Hermetically sealed. Primary: 117v AC # 1 & 2 no load, 3 & 4: 40v, 3 & 5: 60v, 4 & 5: 20v. Secondary: 60v @ 100mA. 60v @ 0.1 amp tapped 20v / 40v. Date: 1950's.

Primary: 115 volts
Secondary: 4,5,6: 45v c.t. @ 0.3 amp
Secondary: 1,2: 4.5v @ 1 amp

UTC transformer. Primary: 3 & 7: 115v AC. Secondaries: 4,5,6: 45v c.t. @ 0.3 amps, 1,2: 4.5v @ 1 amp. Sealed. 4.4 lbs. 3-7/8" x 3" x 4".

Primary: 115 volts
Secondaries: 160v AC @ 2.5 amp, 32.6v c.t. @ 2 amp
Dimensions: 5-1/4" x 4-1/16" x 3-5/8"

Transformer. Primary: 115v AC. Secondaries: 160v AC @ 2.5 amps, 32.6v c.t. @ 2 amp. 14 lbs. 5-1/4" x 4-1/16" x 3-5/8".

Primary: 115 volts
Secondaries: 46.2v RMS c.t. @ 2.5 amp, 22.4v RMS c.t. @ 2.5 amp
Dimensions: 4-1/4" x 4" x 3-5/8"H

Magnetika transformer. Primary: 115v @ 60 Hz. Secondaries: 46.2v RMS c.t. @ 2.5 amp, 22.4v RMS c.t. @ 2.5 amp. 8.9 lbs. 4-1/4" x 4" x 3-5/8". 2-3/4" x 3-1/4" mounting centers.

Primary: 200/220/240v AC
Secondary 1: 3,4,5: 48v c.t. @ 1 amp
Secondary 2: 6,7,8: 16v c.t. @ 1.25 amp

Triad transformer. Primary: 200/220/240v AC. Secondary 1: 3,4,5: 48v c.t. @ 1 amp. Secondary 2: 6,7,8: 16v c.t. @ 1.25 amp, 60vA. 3 lbs. 2-1/2" x 2-3/4" x 3-1/8". Some rust on lamination surfaces.

Primary: 115 volts
Secondaries: 30v @ 1 amp, 16v c.t. @ 2 amp, 30v c.t. @ 2 amp
Dimensions: 3-1/4" x 3-1/2" x 4-1/4&quot

KTC open frame transformer. Primary: 115v AC (blk-blk). Secondaries: 30v @ 1 amp (org-org), 16v c.t. @ 2 amp (blu-wht-blu), 30v c.t. @ 2 amp (brn-yel-brn). 6 lbs. 3-1/4" x 3-1/2" x 4-1/4".

Primary: 115/120/230/240v
Secondary: 34v @ 16 amp
Dimensions: 6" x 4-3/4" x 5-1/2"

Transformer Engineers transformer. Primary: 115/120/230/240v. Secondary: 34v @ 16 amp. Hermetically sealed. Side terminals. 6" x 4-3/4" x 5-1/2". 3-1/4" x 4-3/4" mounting centers on bottom tapped #10. 22.9 lbs. Some dents and scratches.

Primary: 115 volts
Secondaries: 32v c.t. @ 1.5a, 160v @ 2a
Dimensions: 5-1/4" x 4" x 4-1/2"

Power Transformer. Primary: 115v AC. Secondaries: 32v c.t. @ 1.5 amp, 160v @ 2 amp. 5-1/4" x 4" x 4-1/2".

Primary: 105/115/125v @ 60 Hz
Secondaries: 50v @ 1a, 125v @ 0.4a
Dimensions: 3-7/8" x 3-1/4" x 5-1/8"H

Gould transformer. Primary: 105/115/125v @ 60 Hz. Secondaries: 50v @ 1a, 125v @ 0.4a. Hermetically sealed. Turret terminals. 3-7/8" x 3-1/4" x 5-1/8"H.

Primary: 117 volts
Secondary: 97.5v RMS into full wave bridge @ 2a DC
Dimensions: 4-1/4" x 5" x 5-1/2"H

Control-Tronics transformer. Primary: 115v @ 50-60 Hz. Secondary: 97.5v RMS into full wave bridge @ 2a DC. Hermetically sealed. 4-1/4" x 5" x 5-1/2"H.

Primary: 115 volts
Secondary: 78 volts
Apparent Power: 234 VA

Power Transformer. Primary: 115v @ 60 Hz. Secondary: 78v @ 3 amp. 350wv. Hermetically sealed. 3-1/2" x 4-1/4" x 5-1/2"H.

Primary: 117 volts
Dual Secondary: 200v RMS @ 60mA, 18v c.t. @ 1 amp
Dimensions: 2-5/8" x 2-3/4" x 3-5/8"H

Freed transformer. Primary: 117v @ 50-400 Hz. Dual secondary: 200v RMS @ 60mA, 18v c.t. @ 1 amp. Hermetically sealed. Turret terminals. 2-5/8" x 2-3/4" x 3-5/8"H. 2" x 3-1/4" mounting centers on side flanges.

Primary: 125/115/105v
Secondary: 48v c.t. @ 3 amps
535wv

Triad transformer. Primary: 125/115/105v @ 48-62 Hz. Secondary: 48v c.t. @ 3 amps, 535wv. Electrostatically shielded. Hermetically sealed. 3-9/16" x 3-1/4" x 3-3/4".

Primary: 95v @ 60 Hz, ±5%
Secondary: 35v @ 6.5 amps
Dimensions: 5" x 4" x 5"H

Westinghouse transformer.

Primary: 115 volts
1st Secondary: 6.3v AC @ 2.5 amps
2nd Secondary: 50v AC @ 30 mA

Coast Coil power transformer. Hermetically sealed. 115v AC @ 50 - 440 Hz primary.

Primary: 115v RMS @ 60 Hz
Secondary: 30v RMS @ 2.5 amps and 5.9v RMS @ 3.0 amps
Dimensions: 3" x 3-1/2" x 4-1/2"H

Honeywell power transformer. Hermetically sealed, round corners. Electrostatically shielded. Turret terminals. 2-1/8" x 2-5/8" mounting centers on 10-32 studs.

Primary: 115/230 volts
Apparent Power: 20 VA
Dimensions: 1-7/8" x 2-1/4" x 1-5/8"H

Triad PC mount transformer. 36 vct @ 0.56 amp, 18v @ 1.12 amp. 4kv test. 50/60 Hz.

Primary: 115/230 volts
Apparent Power: 10 VA
Dimensions: 1-5/8" x 1-7/8" x 1-3/8"H

Triad PC mount transformer. 36 vct @ 0.28 amp, 18v @ 0.56 amp. 10 va. 4 kv test.

Primary: 115 volts
Secondaries: 60/65/70v @ 8 amps, 20v @ 100mA, 30v @ 2 amps
Dimensions: 6-1/2" x 5" x 4-3/8"H

Westinghouse power transformer. 3 windings. Four 1/4-20 mounting studs. Ceramic / turret side terminals.

Primary: 105/115/125 volts
Secondaries: 75vct, 105v AC
Dimensions: 3" x 2-3/4" x 2-1/2"H

Freed Collins transformer. 50 watt core. 2 secondary windings: 75v c.t. & 130v AC. 110/220.

Primary: 115 volts
Secondary: 35v @ 3 amps or 52v @ 3.8 amps
Dimensions: 3-1/8" x 2-3/4" x 3-3/4"H

Dek Ind. Inc. power transformer. Primary: 115v @ 60 Hz.

Primary: 120 volts
Secondary: 50v AC @ 0.5 amps
Dimensions: 2-1/2" sq x 3-1/8"H

Power transformer. Thumb nut terminal posts.

Primary: 115v @ 50-1000 Hz, 48 Ohms
Secondary: 160v @ 190 mA, 271 Ohms
Dimensions: 2-1/4" x 1-3/4" x 2"H

Power transformer.

Primary: 100 - 130v @ 50 - 70 Hz
Secondary: 51v @ 1.6 amps RMS
Secondary: 5.3v @ 1 amp RMS

Toroidal transformer.

Primary: 115 volts @ 50/60 Hz
Dual Secondary: 32v c.t. @ 1 amp & 15v c.t. @ 4 amps
Dimensions: 3" x 3" x 3-3/4"H

Triad transformer. Dual secondary.

Primary: 115 volts
Secondary: 6.5/10/20/40v c.t. @ 1 amp
Dimensions: 3" x 2-1/2" x 3"H

Triad transformer. Voltages changed via primary taps.

Primary: 100v / 200v @ 50/60 Hz
Secondary: 500 volts c.t. @ 2 amps or 25 volts @ 4 amps
100 va

Teca toroidal isolation power transformer.

Primary: 120 volts AC
Secondary: 100 volts c.t. @ 3.2 amps
Dimensions: 4-1/8" x 3" x 4"H

Paraline power transformer. Includes rubber isolation feet. New, unused.

Primary: 115 / 230 volts @ 50/60 Hz
Secondary: 105 volts c.t. @ 3.5 amps
Dimensions: 5"D x 2-1/4"H

Tibi Electronics toroidal transformer.

Primary: 120 volts AC
Secondary: 85 volts c.t. @ 4 amps
Dimensions: 4-1/8" x 4" x 4"H

Paraline power transformer. Fits Miller and Kreisel S-150P studio monitor. Includes rubber feet - insulators. New, unused.

Primary: 108 volts / 216 volts AC @ 50/60 Hz
Secondary: 34.5 volts @ 16 amps
578 va

Amveco Magnetics toroidal transformer. Shielded in metal can.

Primary: 120 volts AC @ 50/60 Hz
Secondary: 35 volts c.t. @ 30 amps
Dimensions: 5-1/4" x 4-3/8" x 5"H

Paraline transformer. Rubber isolation feet.

Primary: 120 / 240 volts
Secondary: 50 volts c.t. @ 1.2 amps
Dimensions: 2-1/2" x 2-1/4" x 2-3/4"H

Power transformer. Includes 4 rubber isolation / shock mount feet. New, unused.

Primary: 120 volts AC @ 50/60 Hz
Secondary: 70 volts c.t. @ 17 amps
1200 watts

Vantas toroidal transformer. 1200 watts.

Primary: 115 volts AC
Secondary: 21 / 32 / 42 volts @ 6 amps and 75 volts c.t. @ 10 amps
Dimensions: 5-1/4" x 6" x 6-1/2"H

Crittenden step down transformer. 2.5 kv test. 1.013 kva total. 1 phase.

Primary: 120 / 240 volts AC
Secondary: 48 volts c.t. @ 6 amps
Dimensions: 3-3/4" x 4-1/4"

Peerless transformer with electrostatic shield. New, but dented.

Primary: 110 / 130 volts @ 50/60 Hz
Secondary: 8.6 / 26 / 43 or 52 volts @ 1 amp
Dimensions: 2-3/8" x 3" x 2-1/2"H

Mercury Magnetics power transformer. 3-9/16" mounting centers.

Primary: 110 volts AC @ 50/60 Hz
Secondary: 100 volts c.t. @ 5 amps
Dimensions: 5-1/4" x 4-1/2" x 4-1/2"H

Mercury Magnetics power transformer. Used, removed.

Primary: 100 / 110 / 120 volts @ 50/60 Hz
Secondary: 120 volts @ 3.5 amps, 21 volts @ 19 amps, 8.5 volts @ 10.5 amps, 37 volts @ 3 amps, 12 volts @ 0.2 amps
1062 va

Amveco Magnetics toroidal transformer.

Primary: 100v / 200v @ 50/60 Hz
Secondary: 28.4v @ 5.6 amp or 56.8v @ 2.8 amp
Dimensions: 4"D x 1-7/8"H

Teca toroidal power isolation transformer. 160va.

Primary: 115 / 230v
Secondary: 100v c.t. @ 7 amp and 40v c.t. @ 5 amp
Dimensions: 5-1/2"D x 2-3/4"H

Hanchih toroidal transformer. Rohs.

Primary: 115/230v AC, 47 - 440 Hz
Secondary: 69v c.t. @ 600 mA
Dimensions: 3" x 3-1/2" x 3-3/4"H

Stelma Inc. power transformer. Hermetically sealed. Electrostatic shield. Turret terminals.

Primary: 115v, 50/60 Hz
Secondary: 40v c.t. @ 4 amps
Dimensions: 3.75"H x 3.12" x 3.5"

Triad transformer. Chassis mount.

Primary: 115 / 230v, 50/60 Hz
Secondary: 71v c.t. @ 0.5 adc
Dimensions: 3" x 3-1/2" x 3"H

Freed transformer. Hermetically sealed. Stud terminals. Made for Collins Radio.

Primary: 110 volts
Secondary: 60 volts
Manufactured by Schumacher

MFG-Schumacher power transformer. 60 vct. 1.0 amps 110v primary. 3 1/8" mount centers. 2 3/4" x 2 1/4" x 2 1/4"H. University sound.

Power Transformer

(TP) 050-7004-00

Primary: 110 volts
Secondary: 60 volts
Manufactured by Schumacher

MFG by Schumacher for university sound. 60 v.c.t. Power Transformer 1.5 amp. 110v primary. Mount centers 2" x 2 1/2" x 2 3/4"H.

JB Transformer

(COL) 672-0434-010

Primary: 105/120/210/240 volts
Secondary: 10 volts
Apparent Power: 68 VA

JB transformer. 68vct, .05 Ω resistance. 11 amps. 5 1/4" x 4 1/2" x 4 3/8"H. Made for collins. 10 ga secondary. 105/120/210/240 47-420 Hz.

Low Voltage Transformer

(COL) 662-0566-010

Primary: 115/230v volts
4 1/2" x 3 7/8" x 3 3/4"H
Secondary: 11v @ 500ma volts

Hammond low voltage transformer. 11v @ 500ma. 38 vct @ 400ma. 40 vct @ 2 amps. 4 1/2" x 3 7/8" x 3 3/4"H. Primary 115/230v, 47-63Hz. Very underrated transformer.

JB Power Transformer

(COL) 672-0366-010

Primary: 120/240 volts
Secondary: 1: 34vct @ 1.5amps, 2: 44vct @ 300ma, 3: 120vct @ 2 amps volts
3 3/8" x 2 5/8" x 2 3/4"H

mfg JB power transformer. Secondary: 1 - 34 vct @ 1.5 amps
2 - 44vct @ 300ma
3 - 120vct @ 2 amps. 3 3/8" x 2 5/8" x 2 3/4"H.

Collins Sealed Transformer

(COL) 662-0534-010

Primary: 115/230 volts
Secondary: 1 - 57.6vrms @ 1.08 arms center tapped, 2 - 25vct Rms @ 3.67 arms volts
Apparent Power: 41-420 VA

Collins sealed transformer. Secondaries 1 - 57.6vrms @ 1.08 arms center tapped, 2 - 25vct Rms @ 3.67 arms. Primary 115/230v, 41-420 Hz. Collins transformer. Hermetically sealed. Electro statically shielded. 4" x 3 11/16" x 2 5/8"H.

Primary: 117 volts
Secondary: 30/36/50 AC volts
Apparent Power: 60 VA

Mounting: center to center distance 5.310". Parallel to width, 4.125" parallel to length, 60.0 Hz. Input-output single phase to single phase. Body measurements: 6.50"L x 5.50"W x 6.0"H. Inclosure type: open. Terminal type + quan. - 10 wine hoou. NSN: 5950-00-456-3379. Winding operating voltage. 117 AC volts. Nominal single component single primary. 30 / 36 / 50 AC.

Primary: 115 volts
Secondary: 60 volts
Apparent Power: 2 VA

Stancor P-8571 Power Transformer. Secondary 60 vct 2.0 amps. Primary 115v AC, 50/60Hz.

Primary: 105, 115, 125 volts
Secondary: Dual 60 vct @ 20 amps volts
Apparent Power: 2.4k VA

Signal Transformer 120-20. Secondary: dual 60 vct @ 20 amps. Parallel for 60 vct @ 40 amp. Series for 30, 60, 90, or 120v @ 20 amps. Primary 105, 115, 125v. 2.4 KVA, 60 lbs. 7.5" x 8.5" x 6.5"H.

Primary: 90 volts
Secondary: 31v AC, 50/60 Hz, 63 amps volts
Apparent Power: 1.95k VA

Superior Electric Co. transformer. Primary: 90v AC. Secondary: 31v AC, 50/60 Hz, 60 amps, 1.95 KVA. With 120v AC applied output: 46v AC. New in the box. 7--1/8" x 7-3/8" x 7"H (with terminals). Harris P/N: 472-1138-000.