Drive Shafts

Drive Shaft Assembly with Outer Gimbal Aviation Part
(SHW) 530905-1
Advanced Technical Corp. drive shaft assembly with outer gimbal. Aviation part. Radial bearings. Spline - male / female. 24" overall length. NSN: 3040-00-593-3883.
$25 each
Flexible Drive Shaft
Coaxial Cable
(SHW) FS24
Flexible drive shaft. Coaxial cable. Soft white cover. 0.165" diameter knurled male. Shrouded female end - 3/16" diameter split housing. 24" overall length.
$10 each - $8.75 (6+)
Variac Steel Shaft
(SHW) SFT.75-10
Variac steel shaft. Use when converting stacked variacs to single phase use. 3/8" shaft, 3/4" outside diameter, 10" overall length.
$18 each
Shaft
Tempered Steel
(SHW) 158023
Shaft, tempered steel. Ball bearings have 0.75" outside diameter. Two (2) shaft diameters 0.317" & 0.375". Bearings are "C" ring, locked in place. 7-7/8" overall length. Very smooth. NSN: 5815-00-795-9417.
$25 each
E.F. Johnson Flex Shaft
(SHW) 115-253
E.F. Johnson flex shaft. Brass ends, phospher bronze flex shaft. 1/4" x 1/2" ends. 3" OAL.
$7.50 each
1/4" Phosphor Bronze
Flexible Shaft
Close up
(SHW) V38J423
G.E. 1/4" phosphor bronze flexible shaft. 17.5" overall length. 2" long steel bushing for center support. 1/4"D shaft on each end. Made in 1945.
$45 each
1/4" Flex Drive Shaft
(SHW) 152
HH Smith 6" long flexible shaft will turn 90 degrees. 3-1/2" radius. 1/4" male shaft each end. Made for continuous rotation. Made from phosphor bronze.
$8 each
Steel Shaft
3/8" Diameter
(SHW) SFT.375-10
Steel shaft. 3/8" diameter x 10-3/4" long. Slight oxidation, but can be removed with crocus cloth.
$7.95 each - $7.25 (10+), $6.50 (50+)
Shaft Coupling
     
(SHW) SEXT-2
Solid brass shaft extension. Two set screws. 1/4" x 2" long. 1/4" bore diameter X 3/8" deep.
$9.95 each - $9 (3+), $8.35 (20+)
Shaft Extension & Reducer
(SHW) 6029-101706
Shaft extension and reducer. Stainless steel. 3/8" x 1/2". 2-3/8" total length.
$29 each
Drive Shaft Couplings
(SHW) 325
3-7/8" long. A unique aluminum drive shaft system allows severe correction for alignment. Available in 2 shaft lengths, 3" and 7". Hubs accept 1/4" shafts. Stainless cross pins.
$5 each
(SHW) 725
7-7/8" long.
$6 each
Double Jointed
Stud Shaft
(SHW) RIG1.25
Double jointed stud shaft. 3/16" stud on each end. 1-1/4" overall length.
$5 each
Copper Shaft
(SHW) CS516
Copper shaft. 5/16" shaft diameter x 1-1/4"L. 0.529" outside diameter shoulder x 2.08" overall length. 0.433" inside diameter. We don't know if this is shaft part or an electrical terminal.
$5 each
Solid Bronze Drive Shaft
(SHW) B.25X.8
Solid bronze drive shaft. Round, slotted "D" shaft. 1/4" diameter x 13/16" long.
$4 each
Solid Bronze Drive Shaft
(SHW) B.25X1.3
Solid bronze drive shaft. "D" shaft on each end. 1/4" diameter x 1-3/8" long. Removed from new equipment.
$5 each
Shaft Extension
Switch Index, 5” Extension
(SWR) S10507
CTS shaft extension 30º index. 1/4" shaft index. 1/2" long shaft in front, 5" behind. 1-1/16" center - center on mounting ear holes. 3/8" bushing.
$13.75 each
Shaft Extension
Switch Index, 3.75” Extension
(SWR) S10508
CTS shaft extension 30º index same as (SWR) S10507 (left) except 1/2" long shaft in front, 3-3/4" behind.
$12 each - $10.90 (6+)
Ultra Long Shaft Extension
(SWR) 204111
CTS ultra long shaft extension. 30º index. 5-1/2" x 1/4" shaft on front / bushing end. 7" x 1/4" shaft on back side. 1-1/16" c-c mounting ears. Bushing requires 3/8" hole.
$15.50 each - $14.25 (6+), $13 (25+)