13 Volt to 21 Volt Power Supplies

Agilent 6950L-T60 5,000 watt DC Supply
0 to 15 vdc @ 0 to 320 amps
(PS) 6950L-T60
Agilent 6950L-T60, 5,000 watt DC supply. Front panel rotary and keypad controls. Also controlled via GPIB and analog signals. Over voltage and current protection programmable. Specs and operations similar to 6680A series supplies. New, unused condition.
  • AC Input: 180 - 235 vac, 3 phase, 47 to 63 Hz
  • DC Output: 0 to 15 vdc @ 0 to 320 amps
  • Dimensions: 16-3/4" x 8-3/4" x 25-1/2"
  • Weight: 113 lbs
$4,995 each
Power Supply Kit
General DataComm GPS - 1A / 1B Power Supply
Input: 120 vac / Outputs: 5 vdc @ 16 amps, +12 vdc @ 4 amps & -12 vdc @ 4 amps
(PS) GPS-1A/1B
General DataComm Industries GPS-1A/1B power supply. A rack mountable power supply that is pretty much useless in today's world. Input voltage = 120 vac. Outputs: 5 vdc @ 16 amps, +12 vdc @ 4 amps & -12 vdc @ 4 amps. However, in linear power supplies the name of the game is iron and this power supply has plenty of iron. Parts included:
  • 1 Transformer - 120 vac primary, Secondaries: one 18 vct & two 15 vac
  • 5 MBR2530 diodes, 25 amp, 100v Schottky Barrier mounted and insulated on a 100 watt heatsink
  • 2 Motorola MDA990-1 bridge rectifiers rated at 30 amps, 50 vac mounted on another heatsink
  • 6 Mepco 30,000 mF, 25v electrolytic capacitors
  • 2 Pass transistor assemblies, each with 3 socketed 2N3055 15 amp transistors insulated on a 300 watt heatsink
  • 3 1600 mF, 15v Mallory caps on a circuit board
  • 3 2N4918 TO-225A transistors insulated and mounted to a heatsink plate
The 12v supplies appear to use LM723 chips to control TO-220 transistors, 2 per supply. Virtually all high current wiring is interconnected via heavy gauge wire and 1/4" spade lugs using three (3) 8 position barrier terminal strips with 4 lugs per position. There is also a 6 position barrier terminal strip of the same style. The output connections on the back panel use the same style 4 position barrier strip.

The unit includes about 98% of the parts you need to build a 13.6v, 15 amp DC supply. There are even switches, LEDs with holders, a couple of thermal switches and all the wire included to finish it off. You supply the power cord.

NOTE: Units were removed from service and are SOLD AS-IS. No guarantee that all parts are functional.
  • Dimensions: 19" x 19" x 3-1/2"
  • Weight: 41 lbs - NOTE: UPS shipping runs around $30
ONLY $35 each
HP Variable Power Supply
0 - 15v DC
      
(PS) HP6453A
Hewlett Packard variable power supply. HP 6453A power supply.
  • Input: 208 vac, 3 phase, 4 wire
  • Output: 0 - 15 volts @ 0 - 200 amps
  • Rack Width: 19"
  • Weight: 240 lbs
$1,175 each
Minicraft Variable Speed Power Supply
9-16vDC @ 1.7 amps
(PS) MB730
Minicraft variable speed power supply. 6' AC cord, 2 prong. New in box.
  • Input: 120 vac - 60Hz
  • Output: 9-16VDC @ 1.7 amps
  • Dimensions: 2-1/2" x 2-1/2" x 5"L
$35 each - $30 (5+), $25 (25+)
DC Power Supply
13.8 vdc @ 25 amps
(EQP) SR-374
Astron SR-374 DC power supply. 1/4" stud output. Mfg. P/N: RS-35-220.
  • Input: 115 / 230 vac - Wired for 230v
  • Output: 13.8 vdc @ 25 amps, Cont 37A ICS
  • Dimensions: 11" x 11" x 5"H
$149 each
Power Supply
3 Outputs: +5 vdc @ 1 amp
2 x Adjustable 1.3 - 18v @ 0.5 amps
(PS) 1301A
Global Specialties power supply. 3 outputs. Series or parallel independent supplies.
  • Input: 115 vac / 230v
  • 1 Output: Adjustable +5 vdc @ 1 amp
  • 2 & 3 Outputs: 1.3 - 18v @ 0.5 amps
$195 each
Power Supply
±12v @ 1.7 amps or ±15v @ 1.5 amps
(EQP) HCBB-7500-A
Power One power supply. 5v @ 6 amp wOVP. Brand new. NSN: 6130-01-053-5223.
  • Input: 100v, 120v, 230v, 240v
  • Output: ±12v @ 1.7a or ±15v @ 1.5a
$89 each
Power Supply
12 vdc @ 35 amps
(EQP) SR-370PS
Scientific Radio power supply. Leads and connector. No covers. Basler transformer. Includes schematic & parts list. Requires business machine AC cord. NOTE: Tested @ 30 amp output.
  • Input: 105 / 115 / 125 or 210 / 230 / 250 vac
  • Output: 12 vdc @ 35 amps
  • Dimensions: 13-1/2" x 4-3/4" x 14"D
$249 each
Power Supply
13 to 14 vdc @ 20 amps
(EQP) SR-224
Scientific Radio power supply. Current and voltage meter. Used.
  • Input: 105 to 135 vac, 60 Hz
  • Output: 13 to 14 vdc, 0 to 20 amps or more
  • Dimensions: 19" rack width x 5"H x 18"D behind the front panel
$225 each
Astron RS-12A Power Supply
13.8 vdc / 9 amps Continuous / 12 amps ICS
Tested to 11.3 amps Output
(PS) RS-12A
Astron RS-12A power supply. Removed from service.
  • Input: 105 - 125 vac
  • Output: 13.8 vdc @ 9 amps continuous, 12 amps ICS, Tested to 11.3 amp output
  • Dimensions: 4-1/2" x 8" x 9"
  • Weight: 13 lbs
$75 each
"25w Switcher" Power Supply
13.8 vdc / 1.2 amps
13.8 vdc / 0.7 amps
(PS) PC25C
Purcell Systems "25 watt Switcher" power supply.
  • Input: 100 - 240 vac, 50 - 60 Hz, 0.2 amps
  • Output: 13.8 vdc @ 1.2 amps, 13.8 vdc @ 0.7 amps
  • Dimensions: 2-1/2" x 6-7/8"L x 1-3/8"H
$7.95 each - $6.90 (5+)
TDK Lambda Switching
Power Supply
(PS) HWS15-15/A
TDK Lambda switching power supply. New in box with instruction manual.
  • Input: 100-240v AC @ 0.5 amp, 50/60 Hz
  • Output: 15v @ 1 amp, 15 watts
  • Dimensions: 3-3/16" x 3-11/16" x 1-1/4"H
$27 each - $25 (3+), $21 (12+)
TDK Lambda Power Supply
(PS) HWS100-15/A
TDK Lambda power supply. New in box with instruction manual.
  • Input: 100-240v AC @ 1.4 amp, 50/60 Hz
  • Output: 15v @ 7 amp, 100 watts
  • Dimensions: 3-1/4" x 7" x 1-1/4"H
$99 each - $91.70 (3+)
Regulated Power Supply
+15v DC / 350 ma / -15v DC / 350 ma
Shared Common
(PS) P35-1
Polytron Devices sealed PCB mount power supply. Short protected by internal 1/4" amp slow blow.
  • Input: 105 - 125v AC, 50-60 Hz
  • Output: +15v DC @ 350 ma, -15v DC @ 350 ma, Shared common
  • Dimensions: 2.5" x 3.5"L x 1.62"H
$100 each
Black & Decker Power Supply
120 vac @ 0.6 amps, 60 Hz
Black & Decker Power Supply
(PS) 9821
Black & Decker power supply. 16 vdc @ 4 amp nominal. Trimmable 12.6-14 vdc. Front panel control - voltage trim. Output jack - polarized. 6-1/2" x 3-3/4" deep. 3-3/8"H.
  • Input: 120 vac, 60 Hz, 0.6 amp
$39.95 each
Dual Power Module
+15v DC / 100 ma
Analog Devices Dual Power Module
(PS) 902
Analog Devices dual power module. 2-1/2" x 3-1/2" x 1-1/4" high.
$49 each
Regulated Power Supply
±15v @ 200 ma
(PS) P2.15.200K
Semiconductor Circuits regulated power supply. Space Lab spare part. ±15v @ 200 ma. 2-1/2" x 3-1/2" x 1-3/8".
$35 each
OpAmp Dual Power Supply
±15v / ±0.5v
(PS) VTD15-450
Acopian OpAmp dual power supply. 4.5 amp @ 40ºC, 3 amp @ 71ºC. ±15v, ±0.5v. Brand new.
  • Dimensions: 5-1/8" x 3-1/2" x 14"
$175 each
Electrostatics Power Supply
±15v DC @ 0.35 amps
(PS) 10-1515
Electrostatics Model 10-1515 power supply. Includes instruction sheet. Weighs 1.25 lbs. New, old stock. Never used. NSN: 6130-01-030-6082.
  • Input: 105v AC, 50 Hz
  • Output: ±15v DC @ 0.35 amps
  • Dimensions: 4.5"L x 1.63"H x 4.5"W
$25 each
Lambda
18 vdc ± 5% @  16.5 amps
(PS) LM-EE18
Lambda, BRAND NEW supply but NO meters. 18 vdc trimmable ±5% @ 16.5 amps. 105-132 vac input.
$495 each
Xantrex Power Supply
0 to 20 vdc @ 0 to 60 amps / 1200 watts
(PS) XFR20-60
Xantrex power supply. Dual LED voltage and current meters. Front panel voltage and current adjust. Remote control via analog GPIB or RS232. Front panel control of OVP set points. Includes manual. Axcelis P/N: 210000215. Brand new!!
  • Input: 100 / 120, 200 / 240 vac, 47-63 Hz
  • Output: 0 to 20 vdc @ 0 to 60 amps, 1,200 watts
  • Dimensions: 19" x 1-3/4" x 21"
  • Weight: 18 lbs
$2,295 each
Triple Deltron Power Supply
Two 12 to 16 vdc @ 2.5 amps
5 vdc @ 8 amps
     
(PS) 10656X
Yes, we still have a good supply of this new, wonderful deltron triple voltage open frame linear supply. So versatile. Trim the 15 vdc fundamental supplies on the circuit board. 12-16v or remote mount a 10 turn 5k ohm pot ((RWV) 35208-5K) and turn it into a 7-30v regulated lab supply. It's simple to do. Instructions included. Series or parallel the two supplies for a combined 7-60v @ 2.5-5 amps. Board trimmable current limiting too. New, boxed, from Collins surplus. 10 pounds each. 3-1/4" x 5" x 11" long.
$35 each - $32 (3+), $29 (25+), $25 (100+)
(PS) 10656X-M
We modify the above supply with remote 10T pots & create two, 7 - 30 vdc @ 2.5 amps variable supplies, new.
$75 each
Precision Power Source
0 - 20v DC @ 0 - 500mA
(PS) 2005A
Power Designs precision power source. 0 - 20v DC @ 0 - 500mA. Excellent condition. Source: Bogdan.
$249
Hewlett Packard Power Supply
0 to 20v / 0 to 45 amps
(PS) 6428B
Hewlett Packard metered power supply. 0 to 20v, 0 to 45 amps. Up to 3 amps @ front. 45 amps @ rear panel. 115 vac input. Metered front panel voltage & current limiting. 11 available. Checked out OK.
  • Dimensions: 19" Rack - 19"D x 5-1/4"H
  • Weight: 72 lbs
$595 each
TCR Power Supply
0 to 20v @ 0 to 30 amps
(PS) TCR20S30-1
TCR metered power supply. 0 to 20v @ 0 to 30 amps. 105 to 125v input. 90mv maximum output ripple. Metered front panel voltage & current limiting. Remotely programmable on rear. DC posts on rear. Checked out OK.
  • Dimensions: 19" rack width x 20"Dx 3-3/8"H
  • Weight: 56 lbs
$535 each
Sorensen Power Supply
0 to 20 vdc @ 0 to 50 amps
(PS) DCS20-50E
Sorensen power supply. Front panel and remote voltage and current limit controls. Digital voltage and current meters. Both controls are 10 turn. Remote via rear DB-25. Includes manual. NOTE: Units are set for 230 vac operation. Easily changed to 115 vac operation via internal jumper (included).
  • Input: 115 & 230 vac, 50/60 Hz
  • Output: 0 to 20 vdc @ 0 to 50 amps
  • Dimensions: 17" x 17" x 1-3/4", 19" rack mount
$725 each
Electronic Measurements PS
0 to 20 vdc @ 0 to 50 amps DC
(PS) EMS20-50-2-D
Electronic Measurements Inc. power supply. Front panel voltage and current limiting / digital voltage and current meters. Can be remoted by rear terminal strip. 10 turn voltage adjustment, 1 turn current limit. Includes manual. NOTE: Units are set for 230 vac operation. Easily changed to 115 vac via internal jumper (included).
  • Input: 115 & 230 vac @ 15 amps, 47/63 Hz
  • Output: 0 to 20 vdc @ 0 to 50 amps DC
  • Dimensions: 17" x 17" x 1-3/4", 19" rack mount
$739 each
Lambda Power Supply
15 vdc Nominal @ 16.7 amps / 250 watts
(PS) SVPS25-15
Lambda power supply. 250 watts.
  • Input: 85 - 265 vac @ 47 / 63 Hz
  • Output: 15 vdc Nominal (14.25v - 15.75v) @ 16.7 amps / 250 watts
  • Dimensions: 4.75" x 1.77"H x 9.5"L
$99 each
Hewlett Packard
0 to 20v @ 0 to 10 amps
(PS) 6286A
Hewlett Packard DC power supply. 0 to 20 v @ 0 to 10 amps. Voltage and current limit metered. Binding posts on front.
  • Dimensions: 8-1/2"W x 5-1/2"H x 17"L
  • Weight: 26 lbs
$375 each
Powermate Power Supply
0 to 20v @ 0 to 12 amps
(PS) POWERMATE
Powermate metered power supply. 0 to 20v @ 0 to 12 amps. Voltage and current limit metered. Binding posts on front. Checked out OK.
  • Dimensions: 8" x 18" x 5-1/2"H
  • Weight: 27 lbs
$375 each
Lambda Power Supply
0 to 20v @ 0 to 15 amps
(PS) LK341A-FM
Lambda metered power supply. 0 to 20v @ 0 to 15 amps. Front voltage and current adjust. Coarse & Fine. Terminals on rear. NICE!! Checked out OK.
  • Dimensions: 5-1/4"H x 8-1/4"W x 18"L
  • Weight: 37 lbs
$525 each
(PS) LK341A/7.5
Lambda metered power supply identical to above except this unit modified to put out up to 7.5v only @ up to 7.5 amps.
$275 each