Inductors: Odds & Ends
Miscellaneous Chokes
Part Number Rating Description Price Each  
(ICH) 851779 2.5 µH Parasitic Choke 1.25 Add
(ICH) 05379-2 0.15 µH, 400ma Choke 1.25 Add
(ICH) 74F396AP 3.9 µH, 225ma Choke 2.00 Add
(ICH) 74F476AP 4.7µH, 300ma Choke 2.50 Add
(ICH) 74F566AP 5.6 µH, 300ma Choke 2.50 Add
(ICH) 05379-37 180 µH, 50ma Ferrite 2.25 Add
(ICH) AC331-75 330 µH, 75ma Ferrite 2.75 Add

Inductor
680 µH / 11.4 amps

(ICH) IHB-6-680
Dale inductor. 680 µH, 11.4 amps. 0.094 ohms DC resistance. 1.33" pitch. 1-3/4" diameter x 1-3/8" high.
$22 each

Torotel Inductor
270µH / 3 amps

(ICH) 15601
Torotel inductor. 270µH, 3 amps. 0.58" pitch. DC:77+
$6.75 each
Coil Form
9 Turns / 2 µH
(ICH) 9-20
9 turns #20 on 1/2" phenolic coil form, 1-7/16" long. 2 µH.
$2 each

Coil Form
5 µH / 5 amps

(ICH) 7888
20 turns on 5/8" coil form. 5 µH, 5 amps. Heavy 1" terminal lugs each end. 2-7/8" total length.
$6 each
Square Chip Inductor
5.9 µH
(ICH) 2551-28
0.105" square chip inductor. 5.9 µH.
$3 each

Inductor
8.2 µH / 6 amps

(ICH) 668-0112010
ADC 3-19146 inductor. 8.2 µH, 6 amps. 1-1/2" outer diameter, 3/4" high.
$8 each - $7 (6+)
Radial Lead RFC
10.5 µH
(ICH) 498828-117
Radial lead rfc. 10.5 µH.
$1.50 each - $1 (6+)

Ceramic Coil Form
12 µH / 2 amps




(IRF) 753
41 turns #22 on 3/4" x 3" ceramic coil form. 12 µH, 2 amps. Tapped @ 3.5 and 5.3 µH from top.
$10 each
Radial Lead Choke
14 µH / 100 ma
(ICH) EP2930
Radial lead choke, 1/4" diameter. 14 µH, 100 ma.
$1 each

Ferrite Bead
18 µH




(ICH) B5505-01
6 turns #30 on ferrite bead. 18 µH. 1/8" diameter.
$1.50 each
RF Coil
37 µH / 2 amps
(ICH) 31250
Pi-wound RF coil on 1/2" diameter, 1-7/16" long phenolic body. Tap @ 1 µH. 37 µH, 2 amps.
$5 each

Molded Toroid
65 µH / 2 amps

(ICH) 668-0121020
Varo molded toroid. 7/8" outer diameter center hole. 65 µH, 2 amps.
$3 each - $2 (6+)
Molded Toroid
90 µH / 5 amps
(ICH) E341
1-1/8" diameter, 5/8" high molded toroid. #6 threaded hole through center. 90 µH, 5 amps.
$5 each - $4 (6+), $3.50 (25+)

Epoxy Sealed Case
84 µH / 15.75 kc / 900 ma


(ICH) T3314
OPT Industries epoxy sealed case, 1/2" diameter x 5/8" high. Tapped (not center). PC mount. High Q. 84 µH, 15.75 kc, 900 ma.
$4 each - $3 (6+), $2.50 (100+)
High Perm Ferrite Bead
95 µH
(ICH) CHOKE112
Very high perm ferrite bead yields 95 µH with only 6 turns #22. 1 amp. 3/8" diameter x 1/2" long. Super high permiability. 95 µH.
$2 each - $1.50 (6+), $1.25 (25+)
High Perm Ferrite Bobbin
790 µH / 5 amps
(ICH) 2893287-02
High perm ferrite bobbin, 18 AWG wire, 1-1/2" diameter. 790 µH, 5 amps.
$15 each

Inductor
2.8 mH

(ICH) CS7371
Inductor. Only 3/4" square, PC mount. 2.8 mH.
*** SOLD OUT ***

Epoxy Sealed Case
126 mH / 100 ma

(ICH) 3322-711
Epoxy sealed case, 7/8" high, 1" deep, 1-11/16" wide. 16 ohm DCR. 126 mH, 100 ma max.
$10 each - $9 (6+)

Shielded Choke
200 mH @ 0 madc, 2 ma AC

(ICH) 3-19701
Shielded choke. 200 mH @ 0 madc, 2 ma AC, 900 Hz. DCR = 62 ohm. 1-1/4" diameter, 11/16" high.
$5 each

Epoxy Sealed Case
160 mH / 688 ma

(ICH) 376A651
Westinghouse inductor, sealed. Case 2-3/4" high x 2-1/2" deep x 3" wide. 3.16 ohm DCR. 160 mH, 688 ma DC 50v at 800 cps (H2), 535v WKG.
$68 each